Kenwood KRF-V5080D- Manuals

5 EN Before applying the power Special features True home theater sound This model incorporates a wide variety of surround modes to bring youmaximum enjoyment from your video software. Select a surround modeaccording to your equipment or the software you are going to play andenjoy! £ Dolby Digital a...

6 EN ON OFF POWER PHONES SPEAKERS ON/OFF ON/STANDBY STANDBY ACTIVE EQ ACTIVE EQ DTS DOLBY DIGITAL INPUT MODE BAND AUTO MEMORY SETUP MUTE DOWN UP MULTI CONTROL INPUT SELECTOR VOLUME CONTROL SOUND DIMMER LISTEN MODE ON/STANDBY STANDBY POWER Names and functions of parts 1 POWER ON/OFF key ^ (For KRF-V5...

8 EN Setting up the system Make connections as shown in the following pages.When connecting the related system components, besure to refer to the instruction manuals supplied withthe components you are connecting.Do not connect the power cord to a wall outlet until allconnections are completed. Note...

9 EN AUX CD / DVD REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPE L R AUDIO Setting up the system Connecting audio components IN OUT IN OUT OUT OUT To AC wall outlet Shape of AC outlets Australia Other countries Cassette deck or MDrecorder CD or DVD player Video component ) Other component *5439/0...

10 EN PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 VIDEO 2IN DVDIN MONITOR OUT VIDEO 1 OUT VIDEO 1 IN VIDEO AUDIO Video deck IN Setting up the system Connecting video components A video component with digital audio outputs should be connected to the VIDEO 2 jacks. Video output(Yellow RCA pin cords) OUT O...

12 EN VIDEO 2 DVD/6CH * CD / DVD COAXIAL OPTICAL DIGITAL IN * VR-806: DVD Setting up the system Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)format digital signals.If you have ...

14 EN CENTER FRONT + - C R L RED WHITE GREEN KRF-V5080D SURROUND + - R GRAY L BLUE SURROUND BACK SURROUND + - VR-806 R GRAY L BLUE BS BROWN SPEAKERS (8 SPEAKERS (8-16 Ω ) SPEAKERS (8-16 Ω ) SUB WOOFER PRE OUT PRE OUT SURR BACK L * SURR BACK R PRE OUT SURR BACK L /SURR BACK SURR BACK R VR-806 * V R -...

15 EN Setting up the system Connecting the terminals Speaker impedance After confirming the speaker impedance indications printed on therear panel of this model, connect speakers with matching impedanceratings. Using speakers with a rated impedance other than thatindicated on the rear panel of this ...

16 EN Preparing for surround sound Speaker settings To enable you to obtain optimum enjoyment from this model’s listeningmodes, make sure to complete the speaker settings (Subwoofer, Front,Center, Surround and Surround Back speakers) as described below. 1 Turn on the power to this model by pressing ...

18 EN Normal playback Preparing for playback Some preparatory steps are needed before starting playback. Turning on this model 1 Turn on the power to the related components. 2 Turn on the power to this model by pressing POWER ON/STANDBY (VR-806) or POWER ON/OFF and ON/STANDBY (KRF-V5080D) key. Selec...

19 EN Listening to a source component 1 Use the INPUT SELECTOR knob or keys to select the sourceyou want to listen to. The input sources change as shown below: 1 “TUNER” 2 “CD/DVD” 3 “TAPE” or “MD” 4 “VIDEO1” 5 “VIDEO2” 6 “DVD/6CH” (VR-806 : “DVD”) 7 “AUX” 2 Start playback from the selected source. ...

20 EN Recording audio (analog sources) Recording a music source 1 Use the INPUT SELECTOR knob to select the source (other than“MD/TAPE”) you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording. Recording video 1 Use the INPUT SELECTOR knob to select the vi...

21 EN Frequency display “ TUNED ” is displayed when a station is received. “ ST. ” lights when a broadcast is being received in stereo. Recording 3 Press and hold the DIMMER key for more than 2 seconds to selectthe A-REC or M-REC mode during digital input. 1 Rec mode off : The digital input record m...

22 EN Presetting radio stations manually MULTI CONTROL MEMORY 1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station. 3 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select one of the station presets (1 – 40). 4 Press the MEMORY key again to confirm t...

23 EN No Surround Back speaker With Surround Back speaker L Front Left speaker SW Subwoofer C Center speaker R Front Right speaker LS Surround Left speaker RS Surround Right speaker BS Surround Back speaker LB Surround Back Left speaker RB Surround Back Right speaker Ambience effects This model is e...

25 EN Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying theDTS mark.DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DVD, or LDsoftware bearing ...

26 EN DVD 6-channel playback (KRF-V5080D only) Using a DVD player or the like equipped with six (5.1) output channels andthis model, you can enjoy surround sound playback.Connecting a DVD player which can decode the surround signal itself isalso acceptable. DVD/6CH INPUT SELECTOR INPUT MODE Preparat...

27 EN Convenient functions Adjusting the sound You can make further adjustments to the sound while listening toplayback in the surround mode. 1 Press the SOUND key until the desired item appears in thedisplay. Each time you press the button, the menu changes as follows:Note that some items are not d...

29 EN DVD player operation keys The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player. Group-1 : DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, DV-402, D...

30 EN Amplifier Cause • The speaker cords are disconnected. • VOLUME is set to the minimum position.• MUTE is ON.• The SPEAKERS switches are set to OFF. • Speaker cords are short-circuited. • The speaker cord is disconnected. • The speaker is not set up correctly. • The surround speaker cords and/or...

32 EN For your records Record the serial number, found on the back of the unit, in the spacesdesignated on the warranty card, and in the space provided below. Referto the model and serial numbers whenever you call upon your dealer forinformation or service on this product. Model_____________________...

5 EN ENGLISH ON OFF POWER PHONES SPEAKERS ON/OFF ON/STANDBY STANDBY ACTIVE EQ ACTIVE EQ DTS DOLBY DIGITAL INPUT MODE BAND AUTO MEMORY SETUP MUTE DOWN UP MULTI CONTROL INPUT SELECTOR VOLUME CONTROL SOUND DIMMER LISTEN MODE Names and functions of parts Main Unit Standby mode While the standby indicato...

7 EN ENGLISH Setting up the system Make connections as shown in the following pages.When connecting the related system components, besure to refer to the instruction manuals supplied withthe components you are connecting.Do not connect the power cord to a wall outlet until allconnections are complet...

8 EN ENGLISH PHONO GND CD / DVD REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPE L R AUDIO Setting up the system Connecting audio components IN OUT IN OUT OUT OUT To AC wall outlet Record player Cassette deck or MD recorder CD or DVD player Video component ( M o v i n g c o i l ( M C ) c a r t r i ...

9 EN ENGLISH Setting up the system PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 VIDEO 2IN DVDIN MONITOR OUT VIDEO 1 OUT VIDEO 1 IN VIDEO AUDIO Connecting video components A video component with digital audio outputs should be connected to the VIDEO 2 jacks. DVD player or LD player OUT Video deck Monitor ...

10 EN ENGLISH VIDEO 2 DVD/6CH CD / DVD COAXIAL OPTICAL DIGITAL IN Setting up the system Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)format digital signals.If you have connecte...

12 EN ENGLISH SURROUND + - R GRAY L BLUE SPEAKERS (8-16 Ω ) CENTER FRONT + - C R L RED WHITE GREEN SPEAKERS (8 SUB WOOFER PRE OUT PRE OUT SURR BACK L SURR BACK R Setting up the system Connecting the speakers Center Speaker Front Speakers Right Left Powered sub woofer Right Left (Be sure to connect b...

13 EN ENGLISH GND AM ANTENNA FM 75 Ω Setting up the system Connecting the terminals Speaker impedance After confirming the speaker impedance indications printed on therear panel of the receiver, connect speakers with matching impedanceratings. Using speakers with a rated impedance other than thatind...

14 EN ENGLISH 1 Turn on the power to this receiver by pressing POWER ON/OFF and ON/STANDBY or POWER key. 2 Press the SETUP key to enter the SETUP mode and use theMULTI CONTROL knob or MULTI CONTROL % / fi keys for the following displays. 1 SP SETUP 2 TESTTONE 3 DISTANCE 4 LFE LVL 5 EXIT The flow of t...

16 EN ENGLISH Preparing for surround sound 6 Adjust the LFE (Low Frequency Effects) level 1 Select the LFE LEVEL from the set up displays and press theSETUP key again. 2 Use the MULTI CONTROL Knob or MULTI CONTROL % / fi keys to adjust the LFE LEVEL. • The LFE LEVEL can be adjusted from 0dB to -10dB ...

17 EN ENGLISH Preparing for playback Some preparatory steps are needed before starting playback. Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing POWER ON/OFF and ON/STANDBY key. Selecting the input mode If you have selected a co...

18 EN ENGLISH Normal playback Adjusting the sound Adjusting the Tone (remote control only) You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode. 1 Press the TONE key to select the TONE mode. 2 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select T...

19 EN ENGLISH Recording Recording audio (analog sources) Recording a music source 1 Use the INPUT SELECTOR knob to select the source (other than“MD/TAPE”) you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording. Recording video 1 Use the INPUT SELECTOR kno...

20 EN ENGLISH Using RDS (Radio Data System) RDS is a system that transmits useful information (in the form of digitaldata) for FM broadcasts along with the broadcast signal. Tuners andreceivers designed for RDS reception can extract the information fromthe broadcast signal for use with various funct...

21 EN ENGLISH 2 Press the MEMORY key while receiving the station. 3 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select one of the station presets (1 – 40). 4 Press the MEMORY key again to confirm the setting. • R e p e a t s t e p s 1 , 2 , 3 , a n d 4 t o s t o r e a s m a n y s t a t...

22 EN ENGLISH Listening to radio broadcasts Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the presetmemory. In order to use the PTY function, the RDS stations must bestored in the preset memory using the RDS AUTO MEMORY function. INPUT SELECTOR...

23 EN ENGLISH Ambience effects Manufactured under license from Dolby Laboratories. “Dolby”, “ProLogic” and the double-D symbol are trademarks of Dolby Laboratories. RS LS C L R SW TV / SCREEN No Surround Back speaker With Surround Back speaker L Front Left speaker SW Subwoofer C Center speaker R Fro...

25 EN ENGLISH Ambience effects Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying theDTS mark.DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DV...

26 EN ENGLISH DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels andthe receiver, you can enjoy surround sound playback.Connecting a DVD player which can decode the surround signal itself isalso acceptable. DVD/6CH INPUT SELECTOR INPUT MODE Preparations • C...

27 EN ENGLISH Convenient functions MULTI CONTROL DIMMER SOUND SOUND MULTI CONTROL Ambience effects Midnight mode (Dolby Digital and DTS mode only) When watching movies at night, you might not be able to raise thevolume as loud as normal. Midnight mode compresses the dynamicrange of previously specif...

29 EN ENGLISH DVD player operation keys The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player. Group-1 : DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, D...

30 EN ENGLISH Amplifier Cause • The speaker cords are disconnected. • VOLUME is set to the minimum position.• MUTE is ON.• The SPEAKERS switches are set to OFF. • Speaker cords are short-circuited. • The speaker cord is disconnected. • The speaker is not set up correctly. • The surround speaker cord...

32 EN ENGLISH Specifications Caution : Read this page carefully to ensure safe operation. AUDIO section Rated power output during STEREO operation DIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω ) ............................................................................... 100 W + 100 W Effective ...