Page 2 - ENGLISH; Before applying the power; Caution : Read this page carefully to ensure safe; How to use this manual; Units are designed for operation as follows.; Unpacking; Safety precautions; CAUTION
2 EN ENGLISH Before applying the power Caution : Read this page carefully to ensure safe operation. How to use this manual This manual is divided into four sections, Preparations, Operations,Remote Control, and Additional Information. Preparations Shows you how to connect your audio and video compon...
Page 3 - Contents; Caution : Read the pages marked; Preparing the remote control; Loading the batteries; Operation
3 EN ENGLISH Before applying the power ........................................................ 2 Safety precautions .................................................................... 2 How to use this manual ............................................................ 2 Unpacking ...................
Page 4 - Special features
4 EN ENGLISH Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring youmaximum enjoyment from your video software. Select a surround modeaccording to your equipment or the software you are going to play andenjoy! £ Dolby Digital and Dolby Digita...
Page 5 - Names and functions of parts; Main Unit; Standby mode
5 EN ENGLISH ON OFF POWER PHONES SPEAKERS ON/OFF ON/STANDBY STANDBY ACTIVE EQ ACTIVE EQ DTS DOLBY DIGITAL INPUT MODE BAND AUTO MEMORY SETUP MUTE DOWN UP MULTI CONTROL INPUT SELECTOR VOLUME CONTROL SOUND DIMMER LISTEN MODE Names and functions of parts Main Unit Standby mode While the standby indicato...
Page 7 - Setting up the system; Analog connections; Microcomputer malfunction; Input mode settings; INPUT MODE
7 EN ENGLISH Setting up the system Make connections as shown in the following pages.When connecting the related system components, besure to refer to the instruction manuals supplied withthe components you are connecting.Do not connect the power cord to a wall outlet until allconnections are complet...
Page 8 - Connecting audio components
8 EN ENGLISH PHONO GND CD / DVD REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPE L R AUDIO Setting up the system Connecting audio components IN OUT IN OUT OUT OUT To AC wall outlet Record player Cassette deck or MD recorder CD or DVD player Video component ( M o v i n g c o i l ( M C ) c a r t r i ...
Page 9 - Connecting video components
9 EN ENGLISH Setting up the system PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 VIDEO 2IN DVDIN MONITOR OUT VIDEO 1 OUT VIDEO 1 IN VIDEO AUDIO Connecting video components A video component with digital audio outputs should be connected to the VIDEO 2 jacks. DVD player or LD player OUT Video deck Monitor ...
Page 10 - Digital connections
10 EN ENGLISH VIDEO 2 DVD/6CH CD / DVD COAXIAL OPTICAL DIGITAL IN Setting up the system Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)format digital signals.If you have connecte...
Page 12 - Connecting the speakers
12 EN ENGLISH SURROUND + - R GRAY L BLUE SPEAKERS (8-16 Ω ) CENTER FRONT + - C R L RED WHITE GREEN SPEAKERS (8 SUB WOOFER PRE OUT PRE OUT SURR BACK L SURR BACK R Setting up the system Connecting the speakers Center Speaker Front Speakers Right Left Powered sub woofer Right Left (Be sure to connect b...
Page 13 - Connecting the terminals
13 EN ENGLISH GND AM ANTENNA FM 75 Ω Setting up the system Connecting the terminals Speaker impedance After confirming the speaker impedance indications printed on therear panel of the receiver, connect speakers with matching impedanceratings. Using speakers with a rated impedance other than thatind...
Page 14 - Select a speaker system.; Preparing for surround sound; Speaker settings
14 EN ENGLISH 1 Turn on the power to this receiver by pressing POWER ON/OFF and ON/STANDBY or POWER key. 2 Press the SETUP key to enter the SETUP mode and use theMULTI CONTROL knob or MULTI CONTROL % / fi keys for the following displays. 1 SP SETUP 2 TESTTONE 3 DISTANCE 4 LFE LVL 5 EXIT The flow of t...
Page 16 - Input level adjustment (analog sources only)
16 EN ENGLISH Preparing for surround sound 6 Adjust the LFE (Low Frequency Effects) level 1 Select the LFE LEVEL from the set up displays and press theSETUP key again. 2 Use the MULTI CONTROL Knob or MULTI CONTROL % / fi keys to adjust the LFE LEVEL. • The LFE LEVEL can be adjusted from 0dB to -10dB ...
Page 17 - Preparing for playback; Turning on the receiver; Normal playback; Listening to a source component; Start playback from the selected source.; INPUT SELECTOR
17 EN ENGLISH Preparing for playback Some preparatory steps are needed before starting playback. Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing POWER ON/OFF and ON/STANDBY key. Selecting the input mode If you have selected a co...
Page 18 - Adjusting the sound
18 EN ENGLISH Normal playback Adjusting the sound Adjusting the Tone (remote control only) You can adjust the sound quality when the receiver is in the PCM stereoand analog stereo mode. 1 Press the TONE key to select the TONE mode. 2 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select T...
Page 19 - Recording; Recording a music source; Recording video
19 EN ENGLISH Recording Recording audio (analog sources) Recording a music source 1 Use the INPUT SELECTOR knob to select the source (other than“MD/TAPE”) you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording. Recording video 1 Use the INPUT SELECTOR kno...
Page 20 - Listening to radio broadcasts; Presetting radio stations manually
20 EN ENGLISH Using RDS (Radio Data System) RDS is a system that transmits useful information (in the form of digitaldata) for FM broadcasts along with the broadcast signal. Tuners andreceivers designed for RDS reception can extract the information fromthe broadcast signal for use with various funct...
Page 21 - Receiving preset stations; Receiving preset stations in order; TUNER; Using the RDS DISPLAY key; RDS DISPLAY
21 EN ENGLISH 2 Press the MEMORY key while receiving the station. 3 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select one of the station presets (1 – 40). 4 Press the MEMORY key again to confirm the setting. • R e p e a t s t e p s 1 , 2 , 3 , a n d 4 t o s t o r e a s m a n y s t a t...
Page 22 - Presetting RDS stations
22 EN ENGLISH Listening to radio broadcasts Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the presetmemory. In order to use the PTY function, the RDS stations must bestored in the preset memory using the RDS AUTO MEMORY function. INPUT SELECTOR...
Page 23 - Ambience effects; Surround modes
23 EN ENGLISH Ambience effects Manufactured under license from Dolby Laboratories. “Dolby”, “ProLogic” and the double-D symbol are trademarks of Dolby Laboratories. RS LS C L R SW TV / SCREEN No Surround Back speaker With Surround Back speaker L Front Left speaker SW Subwoofer C Center speaker R Fro...
Page 25 - Surround play; Preparations
25 EN ENGLISH Ambience effects Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying theDTS mark.DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DV...
Page 26 - DVD 6-channel playback
26 EN ENGLISH DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels andthe receiver, you can enjoy surround sound playback.Connecting a DVD player which can decode the surround signal itself isalso acceptable. DVD/6CH INPUT SELECTOR INPUT MODE Preparations • C...
Page 27 - Convenient functions
27 EN ENGLISH Convenient functions MULTI CONTROL DIMMER SOUND SOUND MULTI CONTROL Ambience effects Midnight mode (Dolby Digital and DTS mode only) When watching movies at night, you might not be able to raise thevolume as loud as normal. Midnight mode compresses the dynamicrange of previously specif...
Page 29 - DVD player operation keys; Basic remote control operations for other components; Numeric keys
29 EN ENGLISH DVD player operation keys The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player. Group-1 : DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, D...
Page 30 - In case of difficulty; Resetting the Microcomputer
30 EN ENGLISH Amplifier Cause • The speaker cords are disconnected. • VOLUME is set to the minimum position.• MUTE is ON.• The SPEAKERS switches are set to OFF. • Speaker cords are short-circuited. • The speaker cord is disconnected. • The speaker is not set up correctly. • The surround speaker cord...
Page 32 - Specifications
32 EN ENGLISH Specifications Caution : Read this page carefully to ensure safe operation. AUDIO section Rated power output during STEREO operation DIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω ) ............................................................................... 100 W + 100 W Effective ...
