Keating Griddle - Manuals

3 pages 11 - 12 Wiring Diagram) to see if the griddle isconnected three phase or single phase. All wires,cords, plugs, receptacles and circuit breakers must besized adequately for the full load rating of the griddle asspecified by local codes or, in the absence of localcodes, by the current National...

4 NOTE: Because of the superior heating characteristics and heat retention properties found in theMIRACLEAN ® Griddle, operating temperatures should be set 10°F to 25°F below conventional griddles. 3. Locate the inverted “V’s” on the front of the griddle cooking plate. Depending on your model you ma...

5 CLEANING THEGRIDDLE The surface of the MIRACLEAN ® Griddle is very durable and with proper care, following the proceduresbelow, will last many years. A sample of Keating Klenzer, Keating palmetto brushand a 4” scraper are included with each new griddle. 1. Scrape MIRACLEAN ® surface with the Keati...

6 A. Griddle Surface With proper care, the MIRACLEAN ® surface and its unique cooking properties will last for many years.However, nicks or dents in the griddle surface maycause the griddle surface to lift from the depressedarea. If nicks are close together, the surface may raiseand be torn when a s...

7 V SERVICE DIAGNOSIS A. Trouble shooting The following diagnosis is only to be used as a guide to qualified personnel. Keating recommends that you use aqualified service company. Call 1-800-KEATING if you need assistance in locating a qualified service company. PROBLEM PROBABLE CAUSE SOLUTION Gridd...

D 052505 Grease Drawer (Not Shown) 8 VI PARTS LIST ORDERING PARTS Parts may be ordered by calling 1-800-KEATING or your local Keating service company. You may also order on-line at Keating’s part store, www.keatingofchicago.com Refer to the Keating MIRACLEAN ® Electric Griddle Limited Warranty for c...

9 To replace thermostat: • Loosen nuts (#7) • Loosen nuts to Dispersion Plate (if needed) • Slide thermostat bulb through slots pictured in items 2, 3, & 4. • With bulb tight against the plate, tighten all nuts. Figure 6-3Heating Element Assembly ITEM DESCRIPTION PART NUMBER QTY 24" DEEP QTY...

10 Assembly instructions for griddle stand on casters (There is no top on this stand)

11 VII WIRING DIAGRAM 208 - 240 VOLT WIRING DIAGRAM - 2011 ORG BLK BLK BLK thermostat RED TO ˆTH/TP˜ ON GAS VALVE WHITE TO ˆTP˜ TERMINAL ON GAS VALVE TO ˆTH˜ ON GAS VALVE TO ˆTH/TP˜ ON GAS VALVE TO ˆPILOT˜ ON GAS VALVE

14 480 VOLT WIRING DIAGRAM NOTE: Griddles rated at 480 Volts use type D-1 thermostats which include On/Off switches. Separate On/Off switches are not provided with these griddles.

15 VIII KEATING GRIDDLE SPECIFICATIONS 24" DEEP MODELS 27x24 30x24 36x24 A M P S VOLTS kW S I N G L E L1 L2 L3 PHASE 208 4.1 10 17 10 20 220 4.6 11 18 11 21 240 5.5 11 20 11 23 AMPS PER LINE-THREE PHASE 2 ELEMENTS (2300 W EACH) A M P S VOLTS kW S I N G L E L1 L2 L3 PHASE 208 6.2 17 17 17 30 220 ...

SERVICE INFORMATION If you have a service related question call 1-800-KEATING. Please state the nature of the call; it will ensure speaking with the appropriate person. Have your serial and model number available when ordering parts. KEATING OF CHICAGO, INC. 8901 W. 50th Street, McCook, Illinios 605...