JVC KD-LX555R - Manuals

5 ENGLISH LVT1008-001A [E/EX] Remote controller 3 • Selects the preset stations while listening to the radio (or the DAB tuner).Each time you press the button, the presetstation (ensemble) number increases, andthe selected station (ensemble) is tuned in. • Skips to the first file of the previous fol...

6 ENGLISH LVT1008-001A [E/EX] Preparing the remotecontroller Before using the remote controller:• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is noobstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial light...

7 ENGLISH LVT1008-001A [E/EX] 3 Adjust the volume. 4 Adjust the sound as you want (seepages 29 and 30). To drop the volume in a moment Press SOURCE ATT for more than 1 secondwhile listening to any source. “ATT” rotates onthe display, and the volume level will drop in amoment.To resume the previous v...

8 ENGLISH LVT1008-001A [E/EX] Setting the clock 1 Press and hold SEL (S) for morethan 2 seconds so that one of thePSM items appears on the display.(See pages 31 and 32.) 2 Set the hour. 1 Select “CLOCK HOUR” if not shown onthe display. 2 Adjust the hour. 3 Set the minute. 1 Select “CLOCK MIN (minute...

9 ENGLISH LVT1008-001A [E/EX] KD-LX555R SSM 10 7 8 9 11 12 OFF S T D M MODE BAND TP/PTY DISP SEL INT RPT RND MONO EQ ATT SOURCE KD-LX555R SSM 10 7 8 9 11 12 OFF S T D M MODE BAND TP/PTY DISP SEL INT RPT RND MONO EQ ATT SOURCE Listening to the radio You can use either automatic searching ormanual sea...

10 ENGLISH LVT1008-001A [E/EX] Storing stations in memory You can use one of the following two methods tostore broadcasting stations in memory.• Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You ca...

11 ENGLISH LVT1008-001A [E/EX] Manual preset You can preset up to 6 stations in each band(FM1, FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (in this example,FM1). 1 Press SOURCE ATT toselect FM as the source. 2 Press and...

12 ENGLISH LVT1008-001A [E/EX] RDS OPERATIONS What you can do with RDS RDS (Radio Data System) allows FM stations tosend an additional signal along with their regularprogramme signals. For example, the stationssend their station names, as well as informationabout what type of programme they broadcas...

14 ENGLISH LVT1008-001A [E/EX] Using PTY Standby Reception PTY Standby Reception allows the unit to switchtemporarily to your favourite programme (PTY:Programme Type) from the current source(another FM station or CD). • PTY Standby Reception will not work if you are listening to an AM station. You c...

15 ENGLISH LVT1008-001A [E/EX] Searching your favorite programme You can search any one of the PTY codes.In addition, you can store your 6 favoriteprogramme types in the number buttons.When shipped from the factory, the following 6programme types have been stored in thenumber buttons (1 to 6). To st...

16 ENGLISH LVT1008-001A [E/EX] To search your favorite programme type 1 Press and hold TP/PTY (T) for morethan 2 seconds while listening to anFM station. 2 Select one of the PTY codes. 3 Press ¢ or 4 to start PTY search for your favorite programme. • If there is a station broadcasting a programme of...

17 ENGLISH LVT1008-001A [E/EX] Changing the display mode whilelistening to an FM station You can change the initial indication on thedisplay to either station name (PS NAME) or tostation frequency (FREQUENCY), while listeningto an FM RDS station.• See also “Changing the general settings (PSM)” on pa...

19 ENGLISH LVT1008-001A [E/EX] KD-LX555R SSM 10 7 8 9 11 12 OFF S T D M MODE BAND TP/PTY DISP SEL INT RPT RND MONO EQ ATT SOURCE KD-LX555R SSM 10 7 8 9 11 12 OFF S T D M MODE BAND TP/PTY DISP SEL INT RPT RND MONO EQ ATT SOURCE To stop play and eject the CD Press OFF 0 briefly. CD play stops, the dis...

20 ENGLISH LVT1008-001A [E/EX] Locating a track or aparticular portion on a CD To fast-forward or reverse the track To go to the next tracks or the previoustracks To go to a particular track directly Press the number button corresponding to thetrack number to start its playback.• To select a track n...

21 ENGLISH LVT1008-001A [E/EX] Playing a CD Text In a CD Text, some information about the disc(its disc title, performer and track title) isrecorded.You can show this CD Text information on thedisplay. Select text display mode while playing aCD Text. Each time you press the button, the displaychange...

22 ENGLISH LVT1008-001A [E/EX] MP3 INTRODUCTION Precautions when recording MP3 fileson a CD-R or CD-RW This unit can only read MP3 files that arerecorded in the format that is compliant with ISO9660 Level 1, Level 2, or Joliet. How are MP3 files recordedand played back? MP3 “ files (tracks) ” can be...

23 ENGLISH LVT1008-001A [E/EX] MP3 folder/file configuration : Root : Folders : MP3 files MP3 playback/search order • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Normally, this unit plays back MP3 files in the recorded order. • The nu...

24 ENGLISH LVT1008-001A [E/EX] Refer also to “CD OPERATIONS” on pages 19 to21. Playing an MP3 disc 1 Open the control panel. The display panel moves down, and theloading slot appears. 2 Insert an MP3 disc into the loadingslot. The unit draws in adisc, the display panelmoves up, and discplay startsau...

25 ENGLISH LVT1008-001A [E/EX] To stop play and eject the disc Press OFF 0 briefly. Disc play stops, the display panel moves down,then the disc automatically ejects from theloading slot. To move up the display panel, press ¢ or 4 . If no button is pressed, the display panel will move up in about 5 m...

26 ENGLISH LVT1008-001A [E/EX] To go to a particular folder directly IMPORTANT: To directly select the folders using the numberbutton(s), it is required that folders areassigned 2 digit numbers at the beginning oftheir folder names. (This can only be doneduring the recording of CD-Rs or CD-RWs.)Ex.:...

27 ENGLISH LVT1008-001A [E/EX] and RND indicators Ex.: When you select “DISC RND” Selecting MP3 playback modes To play back files at random(Folder Random/Disc Random Play) You can play back all files of the current folder orall files on the MP3 disc at random. 1 Press BAND MODE (M) to enterthe funct...

29 ENGLISH LVT1008-001A [E/EX] Selecting preset sound modes(iEQ: i-equalizer) You can select a preset sound mode suitable tothe music genre . • There is a time limit in doing the following procedure. If the setting is canceled before youfinish, start from step 1 again. 1 Press BAND MODE (M). “MODE” ...

30 ENGLISH LVT1008-001A [E/EX] Storing your own soundadjustments You can adjust the sound modes to your preferenceand store your own adjustments in memory(USER 1, USER 2 and USER 3).• There is a time limit in doing the following procedure. If the setting is canceled before youfinish, start from step...

31 ENGLISH LVT1008-001A [E/EX] 24HOUR 8 24HOUR 12HOUR ADJUST ON 17 ADJUST ON ADJUST OFF CLOCK ON CLOCK ON 32 CLOCK OFF PS NAME PS NAME 17 FREQUENCY 14 OFF 29 programme types (See page 18.) AF 13 OFF* 1 AF REG AF OFF Changing the general settings(PSM) You can change the items listed on the nextpage b...

32 ENGLISH LVT1008-001A [E/EX] Preferred Setting Mode (PSM) items To set the clock display— CLOCK DISP You can set the clock to be shown on the displaywhen the unit is turned on. When shipped fromthe factory, the clock is set to be shown on thedisplay. • CLOCK ON: Clock display is turned on. • CLOCK...

34 ENGLISH LVT1008-001A [E/EX] To make the front panel look flat (hidingthe control panel)— FLAT PANEL When operating the receiver using the remotecontrol, you can hide the control panel to makethe front panel look flat. When shipped from thefactory, “FLAT OFF” is selected. • FLAT ON: The control pa...

35 ENGLISH LVT1008-001A [E/EX] 3 Select the character set you wantwhile “ ” is flashing. Each time you press the button,the character set changes asfollows: 4 Select a character. • See “Available characters” on page 37. 5 Move the cursor to the next (orprevious) character position. 6 Repeat steps 3 ...

36 ENGLISH LVT1008-001A [E/EX] Using the security lock You can prohibit the unauthorized use of this unitby the others.To use the security lock, you need to set thepassword first. Once you set the password, theunit will ask you to enter the password when youturn on the unit for the first time afterr...

37 ENGLISH LVT1008-001A [E/EX] To change the password If you want to change the password after youhave registered it, follow the procedure below. 1 Press SEL (S) and ¢ at the same time for more than 2 seconds.“ ” appears on the display. 2 Enter the current password correctly, thenpress SEL (S).The u...

38 ENGLISH LVT1008-001A [E/EX] CD CHANGER OPERATIONS Playing discs Select the CD changer. Each time you press the button,the source changes as describedon page 7.Playback starts from the firsttrack of the first disc.All tracks of all discs are playedback. Notes: • If you have changed “EXT INPUT” set...

39 ENGLISH LVT1008-001A [E/EX] MP3 indicator • When the current disc is an MP3 disc: Playback starts from the first folder of thecurrent disc once file check is completed. • When the current disc is a CD: Playback starts from the first track of thecurrent disc. Elapsed playing time Current track To ...

40 ENGLISH LVT1008-001A [E/EX] Selecting the playback modes To play back tracks/files at random(Folder Random/Disc Random/MagazineRandom Play) 1 Press BAND MODE (M) to enterthe functions mode during play.“MODE” appears on the display. 2 Press RND (random), while“MODE” is still on the display.Each ti...

42 ENGLISH LVT1008-001A [E/EX] EXTERNAL COMPONENT OPERATIONS Playing an external component You can connect the external component to theCD changer jack on the rear using the Line InputAdapter KS-U57 (not supplied). Preparations: • For connecting the Line Input Adapter KS-U57 and the external compone...

43 ENGLISH LVT1008-001A [E/EX] DAB TUNER OPERATIONS We recommend that you use DAB (Digital AudioBroadcasting) tuner KT-DB1000 or KT-DB1500with your unit.If you have another DAB tuner, consult your JVCIN-CAR ENTERTAINMENT dealer.• Refer also to the Instructions supplied with your DAB tuner. What is D...

44 ENGLISH LVT1008-001A [E/EX] 4 Select a service you want to listento. 1 Press BAND MODE (M).“MODE” appears on thedisplay. 2 Press ¢ or 4 to select a service you want,while “MODE” is still on thedisplay. To change the display information whiletuning in to an ensemble Normally service name is shown ...

46 ENGLISH LVT1008-001A [E/EX] What you can do more withDAB Tracing the same program automatically(Alternative Reception) You can keep listening to the same program.• While receiving a DAB service: When driving in an area where a servicecannot be received, this unit automaticallytunes in another ens...

47 ENGLISH LVT1008-001A [E/EX] TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a servicecenter. Remedies Adjust it to the optimum level. Check the cords andconnections. Enter the password.(See page 37.) Press the reset button on thefront pa...

50 ENGLISH LVT1008-001A [E/EX] MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs,CD-Rs (Recordable), CD-RWs (Rewritable), andCD Texts. • This unit is also compatible with MP3 discs. How to handle discs When removing a disc from itscase, press down the center holde...

51 ENGLISH LVT1008-001A [E/EX] SPECIFICATIONS AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than0.8% total harmonic distortion. Rear: 19 W per channel into 4...

LVT1008-001A [E/EX] VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réin...

2 LVT1008-004A [E/EX] • When installing the unit without using the sleeve / Beim Einbau des Geräts ohne Halterung / Lors de l’installation de l’appareil scans utiliser de manchon / Wanneer u het apparaat zonder huis installeert In a Toyota for example, first remove the car radio and install the unit...

3 LVT1008-004A [E/EX] 4 5 1 2 3 4 2 3 (ILLUMINATION) P L O M N J A B G H C D E F 6 7 15 FRANÇAIS DEUTSCH NEDERLANDS ENGLISH A If your car is equipped with the ISO connecterWenn Ihr Auto mit ISO-Steckern ausgestattet istSi votre voiture est équippée d’un connecteur ISOIndien uw auto is uitgerust met ...