JVC KD-LH1101 - Manuals

ENGLISH 5 Remote controller 3 • Selects the preset stations while listening to the radio (or the DAB tuner).Each time you press the button, the presetstation (or service) number increases, andthe selected station (or service) is tuned in. • While playing an MP3 disc on an MP3- compatible CD changer;...

ENGLISH 6 Preparing the remotecontroller Before using the remote controller:• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is noobstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing the...

7 ENGLISH 4 Adjust the sound as you want. (Seepages 27 – 29.) Note: While playing a source, you can also show the levelmeter on the display. For details, see “Activating thelevel meter” on page 30. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on t...

8 ENGLISH Canceling the displaydemonstration When shipped from the factory, displaydemonstration has been activated, and startsautomatically when no operations are done forabout 20 seconds.• It is recommended to cancel the demonstration before you use the unit for the first time. To cancel the displ...

9 ENGLISH Setting the clock You can also set the clock system to either24 hours or 12 hours. 1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(PSM: see pages 31 and 32.) The next-step-operationbuttons start flashing. 2 Press number button 2 to s...

10 ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching or manualsearching to tune in to a particular station. Searching a station automatically:Auto search 1 Select the band (FM1 – 3, AM). Each time you press thebutton, the band changes asfollows: Note: This receiv...

11 ENGLISH 3 Tune in to a station you want while“Manual Search” is flashing. • If you release your finger from the button, the manual mode automatically turns offafter 5 seconds. • If you hold down the button, the frequency keeps changing (in 50 kHz intervals forFM and 9 kHz for AM—MW/LW) until your...

12 ENGLISH 2 Start automatic preset. 1 Press M (MODE). “Mode” appears on the display.The next-step-operationbuttons start flashing. 2 Press and hold number button 5, while“Mode” is still on the display. Local FM stations with the strongest signals aresearched and stored automatically in the bandnumb...

13 ENGLISH Selecting a preset station using thepreset station list If you forget what stations are stored in whatpreset numbers, you can check the preset stationlist, then select your desired station. 1 Select the band (FM1 – 3, AM). Each time you press thebutton, the band changes asfollows: 2 Press...

14 ENGLISH Changing the display pattern By pressing D (DISP), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: Large animation display • When receiving an AM or non FM RDS-station • When receiving an FM RDS station (see the ...

15 ENGLISH RDS OPERATIONS What you can do with RDS RDS (Radio Data System) allows FM stations tosend an additional signal along with their regularprogramme signals. For example, the stationssend their station names, as well as informationabout what type of programme they broadcast,such as sports or ...

16 ENGLISH 1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(PSM: see pages 31 and 32.) 2 Press number button 4 to select“TUNER”—Tuner category of thePSM settings. The “PTY Stnby” (standby) setting screenappears on the display. 3 Select “AF-Regn...

17 ENGLISH Using PTY Standby Reception PTY Standby Reception allows the unit to switchtemporarily to your favorite programme (PTY:Programme Type) from any source except AMstations. To select your favorite PTY code for PTYStandby Reception When shipped from factory, PTY StandbyReception has been set ...

18 ENGLISH Searching your favorite programme You can search any one of the PTY codes.In addition, you can store your 6 favoriteprogramme types in the number buttons.When shipped from the factory, the following6 programme types have been stored in thenumber buttons (1 to 6). To store your favorite pr...

19 ENGLISH 3 Press and hold the number buttonfor more than 2 seconds to store thePTY code selected into the presetnumber you want. Selected preset number flashes for a while. 4 Press and hold TP/PTY for more than2 seconds to exit from this mode. To search your favorite programme type 1 Press and hol...

20 ENGLISH Setting the TA volume level You can preset the volume level for TA StandbyReception. When a traffic programme is received,the volume level automatically changes to thepreset level.• See also “Changing the general settings (PSM)” on pages 31 and 32. 1 Press and hold SEL (select) for more t...

22 ENGLISH Playing a CD 1 Open the control panel. Note on One-Touch Operation: When a CD is already in the loading slot,pressing CD/CD-CH turns on the unit and startsplayback automatically. 2 Insert a CD into the loading slot. The unit turns on,draws the CD andstarts playbackautomatically. 3 Close t...

23 ENGLISH To stop play and eject the CD Press 0 . CD play stops and the control panel flips down.The CD automatically ejects from the loadingslot. The source changes to the previouslyselected source.• If you change the source, CD play also stops (without ejecting the CD).Next time you select “CD” a...

24 ENGLISH To play back tracks repeatedly(Track Repeat Play) You can play back the current track repeatedly. 1 Press M (MODE) while playing a CD. “Mode” appears on the display.The next-step-operation buttonsstart flashing. 2 Press number button 2, while “Mode” is still onthe display.Each time you pr...

25 ENGLISH Prohibiting CD ejection You can prohibit CD ejection and can lock a CDin the loading slot. While pressing CD/CD-CH, press andhold for more than 2 seconds. “No Eject” flashes on the display for about5 seconds, and the CD is locked and cannot beejected. To cancel the prohibition and unlock ...

27 ENGLISH SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to yourpreference.• “Vol Adj” setting is required for each source except FM. Before starting “Vol Adj,” select anappropriate source for which you want to makean adjustment. 1 Select the item you want to adjust....

29 ENGLISH 4 Make adjustments as you like. 1) Press ¢ or 4 to select the frequency band—60 Hz, 150 Hz,400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 12 kHz. 2) Press 5 (up) or ∞ (down) to adjust the level of the selected band within therange of –05 to +05. 3) Repeat steps 1) and 2) to adjust theother frequency band...

30 ENGLISH Activating the level meter You can show the level meters on the displaywhile playing any source. This unit is equippedwith three level meter patterns.When shipped from the factory, level meter is setto “Off.”• There is a time limit in doing the following procedure. If the setting is cance...

31 ENGLISH Changing the general settings(PSM) You can change the items listed on the tablebelow and on page 32 by using the PSM(Preferred Setting Mode) control.• The PSM items are grouped into six categories—MOVIE, CLOCK, DISP (display),TUNER, AUDIO, and COLOR. Basic Procedure 1 Press and hold SEL (...

35 ENGLISH Selecting the dimmer mode You can dim the display at night automatically oras you set the timer. Note: Auto Dimmer equipped with this unit may not workcorrectly on some vehicles, particularly on thosehaving a control dial for dimming.In this case, select any other than “Auto.” 1 Press and...

36 ENGLISH Changing the display color You can set the display color using the PSMcontrol. You can select your favorite color foreach source (or for all sources).You can also create your own colors, and setthem as the display color. Setting the desired color for eachsource Once you have set the color...

37 ENGLISH Creating your own color—User You can create your own colors—“Day” and“Night,” and select them as the display color forany desired source.• Day: Can be used as your user color duringthe day time (while the headlights areturned off), or as set by the timer(“From– To”). • Night: Can be used ...

38 ENGLISH Assigning names to the sources You can assign names to CDs (both in this unitand in the CD changer) and the externalcomponent.After assigning a name, it will appears on thedisplay when you select the source. CDs* Up to 32 characters (up to40 discs) External component Up to 8 characters * ...

39 ENGLISH Detaching the control panel You can detach the control panel when leavingthe car.When detaching or attaching the control panel,be careful not to damage the connectors on theback of the control panel and on the panelholder. Detaching the control panel Before detaching the control panel, be...

40 ENGLISH CD CHANGER OPERATIONS Playing discs Select the CD changer (CD-CH). * If you have changed “Ext Input” setting to“Line In” (see page 47), you cannot select the CDchanger. • When the current disc is an MP3 disc: Playback starts from the first folder of thecurrent disc once file check is comp...

41 ENGLISH • When the current disc is a CD: Playback starts from the first track of thecurrent disc. Notes: • When you press CD/CD-CH, the power automatically comes on. You do not have to press to turn on the power. • If you change the source, CD changer play also stops. Next time you select the CD ...

43 ENGLISH Selecting a disc/folder/trackusing the name lists To select a disc using the disc lists If you forget what discs are loaded in the CDchanger, you can show the disc title list andselect a disc in the list shown on the display.• The display can show only six disc names at a time. 1 While pl...

44 ENGLISH Selecting the playback modes To play back tracks/files at random(Random Play) 1 Press M (MODE) during play. “Mode” appears on the display.The next-step-operation buttonsstart flashing. 2 Press number button 3 repeatedly while“Mode” is still on the display.Each time you press the button, r...

45 ENGLISH Note: MP3 indicator also lights up if the current playingdisc is an MP3 disc. * “Repeat Folder” is only applicable for MP3 disc. To cancel repeat play, select “Repeat Off ” by pressing number button 2 repeatedly or pressnumber button 4 in step 2 . To play back only intros (Intro Scan) 1 P...

46 ENGLISH Changing the display information While playing back an MP3 file, you can change the MP3 disc information shown on the display. Note: When playing a CD or a CD Text, you can also change the disc information, see page 26 for details. Each time you press the button, the display changes to sh...

47 ENGLISH EXTERNAL COMPONENT OPERATIONS Playing an external component You can connect the external component to theCD changer jack on the rear using the Line InputAdapter KS-U57 (not supplied). Preparation: For connecting the Line Input Adapter KS-U57 andthe external component, refer to the Install...

48 ENGLISH DAB TUNER OPERATIONS Tuning in to an ensemble andone of the services A typical ensemble has 6 or more programmes(services) broadcast at the same time. Aftertuning in to an ensemble, you can select aservice you want to listen to. Before you start.... Press FM/AM briefly if CD, CD changer, ...

49 ENGLISH 3 Start searching for an ensemble. When an ensemble is received, searchingstops. To stop searching before an ensemble isreceived, press the same button you have pressed for searching. 4 Select a service (either primary orsecondary) you want to listen to. To tune in to a particular ensembl...

51 ENGLISH 3 Press and hold 5 (up) or ∞ (down) until the preset ensemble (primaryservice) list for the current band(DAB1, DAB2, or DAB3) appears onthe display. Note: You can show the other DAB band presetensemble (primary service) lists (DAB1, DAB2,or DAB3) by pressing 5 (up) or ∞ (down). 4 Select t...

53 ENGLISH ADDITIONAL INFORMATION Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. • You can adjust the preset sound modes temporarily. However, your temporary adjustments will be reset when you select another sound mode. Ava...

54 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a servicecenter. Remedies Adjust it to the optimum level. Check the cords andconnections. Press the reset button on thepanel holder after detaching thecontrol panel. (The clock sett...

56 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs,CD-Rs (Recordable), CD-RWs (Rewritable), andCD Texts. • This unit is not compatible with MP3 discs, but can operate a JVC MP3-compatibleCD changer. How to handle discs When removing a discfrom its case, ...

57 ENGLISH SPECIFICATIONS AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000...

EN, GE, FR, NL 0303KKSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre apparei...

2 • When installing the unit without using the sleeve• Beim Einbau des Geräts ohne Halterung• Lors de l’installation de l’appareil scans utiliser de manchon• Wanneer u het apparaat zonder huis installeert In a Toyota for example, first remove the car radio and install the unit in its place. Zum Beis...

3 7 2 3 4 6 1 3 * * 2 15 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 1 A8 A7 A5 A4 A2 B5 B6 B4 B3 B8 B7 B2 B1 5 A6 (ILLUMINATION) Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause seriousdamage to this unit.The leads ...

4 L R L R L R L R R L R L R L INPUT R L L R L R L R * 2 R L R * 2 L INPUT R L LINE REAR FRONT OUT R L You can connect an amplifier and other equipment toupgrade your car stereo system.• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that itcan be contro...