Page 2 - EN; Using This Instruction Manual; SAFETY PRECAUTIONS; CAUTION; HAZARD, DO NOT EXPOSE
2 EN CAUTIONS: ● This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/ viewfinder playback are possible anywhere. ● Use the JVC BN-V107U/V114U battery packsand,...
Page 3 - ” can be used with this unit.
EN 3 䡲 This camcorder is designed exclusively for the digital video cassette, SD Memory Card andMultiMediaCard. Only cassettes marked “ ” and memory cards marked “ ” or “ ” can be used with this unit. Before recording an important scene . . . .... make sure you only use cassettes with the Mini DV ma...
Page 4 - Wall or Ceiling Mounting; ANTENNA INSTALLATION; Outdoor Antenna Grounding; IMPORTANT PRODUCT; INSTALLATION; Grounding or Polarization
4 EN 5. Ventilation Slots and openings in the cabinet are provided forventilation. To ensure reliable operation of the productand to protect it from overheating, these openings mustnot be blocked or covered.• Do not block the openings by placing the product on a bed, sofa, rug or other similar surfa...
Page 5 - USE; To avoid personal injury:; Combination; SERVICING; Damage Requiring Service
EN 5 USE 1. Accessories To avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causingserious injury to a child or adult, and seriousdamage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the ma...
Page 6 - PROVIDED ACCESSORIES
6 EN • Docking Station CU-V507U • Remote Control Unit RM-V717U • CD-ROM • Audio/Video Cable (ø3.5 mini-plug to RCA plug) • Editing Cable • Battery Pack BN-V107U • AAA (R03) Battery x 2 (for remote control unit) • Memory Card 8 MB (Already inserted in thecamcorder) PROVIDED ACCESSORIES NOTE: In order...
Page 7 - How To Attach The Grip Belt; How To Attach The Strap
EN 7 3 2 1 5 4 How To Attach The Grip Belt 1 Remove the pad and separate the two straps. 2 Thread one end of the strap through theeyelet, then pass the other end through the loop. 3 Repeat the same procedure to attach the strap to the other eyelet. 4 Connect the strap and and thread the strap throug...
Page 8 - AUTOMATIC DEMONSTRATION; MENU
8 EN MODE DEMO – ON OF F AUTOMATIC DEMONSTRATION Automatic Demonstration takes placewhen “DEMO MODE” is set to “ON”(factory-preset). 䡲 Available when the Power Switch is set to“ ” or “ ” and no cassette is in the camcorder. 䡲 Performing any operation during the demon-stration stops the demonstration...
Page 9 - CONTENTS
EN 9 GETTING STARTED GETTING STARTED CONTENTS Power .................................................................. 10 – 11 Grip Adjustment ............................................................. 12 Viewfinder Adjustment .................................................... 12 Tripod Mountin...
Page 10 - GETTING STARTED; Power; CHARGING THE BATTERY PACK; About Batteries
10 EN GETTING STARTED (cont.) Power This camcorder’s 2-way power supply system lets youchoose the most appropriate source of power. Do not useprovided power supply units with other equipment. CHARGING THE BATTERY PACK 1 Make sure you unplug the camcorder’s DC cord fromthe AC Power Adapter/Charger. P...
Page 11 - USING THE BATTERY PACK; Approximate recording time; USING AC POWER
EN 11 1 2 To batterypack mount To DC OUTterminal To AC outlet AC PowerAdapter/Charger DC cord ATTENTION: Before detaching the power source,make sure that the camcorder’s poweris turned off. Failure to do so can resultin a camcorder malfunction. USING THE BATTERY PACK 1 Insert the terminal end 1 of t...
Page 12 - Grip Adjustment; Tripod Mounting
12 EN PAUS E Grip Adjustment 1 Loosen the belt. 2 Pass your right hand through the loop and grasp thegrip. 3 Adjust your thumb and fingers through the grip, toeasily operate the Recording Start/Stop button andPower Switch and Power Zoom (SHUTTLE SEARCH)Ring. Be sure to tighten the belt to your prefe...
Page 13 - Built-in Clock’s Rechargeable Lithium Battery
EN 13 OF F F ADER / W I P E AM AE PROGR A CAMER L MANUA M S Y S T E DSC END AY D I S P L C AN E W. BA L RE N E ON SC L CD / T V U A O T I ME T DA T E / T I ME CODE C LOCK AD J . ––– F F O 2 5 ’ 0 1 C E D 3 0 PM : 5 N RE T UR C LOCKAD J . 2 5 ’ 0 1 C E D 3 0 PM : 5 Date/Time Settings The date/time is...
Page 14 - Loading/Unloading A Cassette
14 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject acassette. 1 Slide down and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder coveropen until it locks. The cassette holder opensautomatically.• Do not touch internal components. 2 Inse...
Page 15 - Recording Mode Setting
EN 15 REC MODE – S P L P MENU Button Lock Button Power lamp Recording Mode Setting Set the tape recording mode depending on yourpreference. 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, then openthe LCD monitor fully or pull out the viewfinderfully. The pow...
Page 16 - Loading A Memory Card; MEMORY CARD
16 EN GETTING STARTED (cont.) Memory card Clipped edge Card Cover Loading A Memory Card The provided memory card is already inserted in thecamcorder when you receive the camcorder. 1 Make sure the camcorder’s power is off. 2 Open the card cover ( MEMORY CARD ). 3 Insert the memory card firmly clippe...
Page 17 - Picture Quality Mode Setting
EN 17 UXGA AU TO GA V S I Z E –– T Y QUA L I – F I NE AU TO – SIZE I MAGE – XGA VGA STANDARD Picture Quality Mode Setting The Picture Quality mode can be selected to best matchyour needs. Two Picture Quality modes are available:FINE and STANDARD (in order of quality). 1 Set the Power Switch to “ ” w...
Page 18 - Operation Mode
18 EN Operation Mode Choose the appropriate operation mode according toyour preference using the Power Switch and VIDEO/ MEMORY Switch. When the Power Switch is set to “ ”, “ ” appears. When set to “ ” or “ ”, there is no indication. To turn on the camcorder, set the PowerSwitch to any operation mod...
Page 19 - VIDEO RECORDING
EN 19 VIDEO RECORDING & PLAYBACK VIDEO RECORDING & PLAYBACK CONTENTS VIDEO RECORDING ............................................. 20 – 22 Basic Recording .............................................................. 20 Journalistic Shooting ....................................................
Page 20 - Basic Recording
20 EN BR I GH T 2 5 min 90 min 89 min 3 min 2 min 1 min 0 min min 180 ° 90 ° VIDEO RECORDING Power Lamp Recording Start/Stop Button Tape remainingtime indicator(Approximate) (Now calculating) (Blinking) (Blinking) (Blinking) Display Power Switch Basic Recording NOTE: You should already have performe...
Page 21 - Zooming; Zoom In
EN 21 1 0 x W T 1 xW T 1 0 xW T 20xW T 40xW T Journalistic Shooting In some situations, different shooting angles may provide more dramaticresults. Hold the camcorder in the desired position and tilt the LCDmonitor in the most convenient direction. It can rotate 270° (90° down-ward, 180° upward). In...
Page 22 - Time Code; When a blank portion is recorded on a tape; Seconds
22 EN Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recordedscene on the tape during playback.If recording starts from a blank portion, the time code begins counting from “00:00:00”(minute:second:frame). If recording starts from the end ...
Page 23 - VIDEO PLAYBACK; Normal Playback; SHUTTLE; Playback Special Effects
EN 23 VIDEO PLAYBACK Power Switch SHUTTLE SEARCHRing ( 2 / 3 ) Play/PauseButton ( 4 / 6 ) Stop Button ( 5 ) Normal Playback 1 Load a tape ( pg. 14). 2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To startplayback,...
Page 24 - Connections; A. Connection to a TV or VCR equipped only with A/V input connectors
24 EN VIDEO PLAYBACK (cont.) Connections These are some basic types of connections. When making the connections, refer also to your VCR and TVinstruction manuals. A. Connection to a TV or VCR equipped only with A/V input connectors B. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V inp...
Page 25 - DISPLAY; Docking Station Attachment
EN 25 NOTES: ● It is recommended to use the AC Power Adapter/Charger as the power supply instead of thebattery pack ( pg. 11). ● The S-Video cable is optional. Be sure to use theYTU94146B S-Video cable.Consult the JVC Service Center described on thesheet included in the package for details on itsava...
Page 26 - Blank Search
26 EN B L ANK S EARCH 44 Power Switch Blank Search Helps you find where you should start recording in themiddle of a tape to avoid time code interruption( pg. 22). 1 Load a tape ( pg. 14). 2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button ...
Page 27 - RECORDING
EN 27 DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK CONTENTS D.S.C. RECORDING .............................................. 28 – 29 Basic Shooting (Snapshot) ......................................... 28 – 29 D.S.C. PLAYBACK ................................................ 30 – 38 Normal Pl...
Page 28 - SNAPSHOT MODE SELECTION; MEMORY; SNAPSHOT RECORDING; SNAPSHOT
28 EN SNAP MODE – F U L L MU L T I – 4MU L T I – 9 P I N – UP F RAME D.S.C. RECORDING Basic Shooting (Snapshot) You can use your camcorder as a Digital Still Camera fortaking snapshots. NOTE: You should already have performed the procedures listedbelow. If not, do so before continuing. ● Power ( pg....
Page 30 - SHUTTLE SEARCH
30 EN 10 10 / 24 24 100 100-0010 0010 100 100-0011 0011 100 100-0012 0012 100 100-0013 0013 JAN JAN 10 10 ’01 01 11 11 / 24 24 JAN JAN 10 10 ’01 01 12 12 / 24 24 JAN JAN 10 10 ’01 01 13 13 / 24 24 JAN JAN 10 10 ’01 01 D.S.C. PLAYBACK Power Switch Normal Playback (Of Images) Images shot with the camc...
Page 31 - Index Screen; E X I T; Selected File
EN 31 To view video clips ( pg. 61) stored in a memory card . . . … during normal playback of image, press SET/SELECT ( pg. 86 and 87, ! SET/SELECT Button) once to engage the video clip mode. “E-CLIP” appears. Then pressing 4 / 6 can allow you to view the video clips in the LCD monitor or viewfinder...
Page 32 - Index Playback; INDEX; Jump Playback; SELECT
32 EN F S F S F F 1 2 3 5 4 E X I T 100-DVC00001 VGA 6 I M A G E F S F S F F 1 2 3 5 4 E X I T 100-DVC00001 6 E - C L I P F S F S F F 1 2 3 5 4 E X I T EXPLOSION 6 S O U N D SSC EEA LT N E C C E T L [[[ +S B / EL –T A ] / N SK E ] L EC T ] 10 / 50 JUMP MENU Index Screenfor images Index Playback You ...
Page 33 - Protecting Files; TO PROTECT A FILE
EN 33 1 F 2 S 3 S 5 F 4 F 6 F E X I T P R O T E C T 1 F 2 S 3 S 5 F 4 F 6 F E X I T P R O T E C T DPOF A T FORM N RE T UR PROT EC T E DE L E T Display Power Switch MENU Button If Protection isremoved PROTECT IndexScreen Normal playback Padlock mark Normal playback Protecting Files The Protect mode h...
Page 34 - Deleting Files
34 EN 1 F 2 S 3 S 5 F 4 F 6 F D E L E T E E X I T S E EC T L E X E CU T E – CANC E L DE L E E T Deleting Files Previously stored files can be deleted either one at atime or all at once. 1 Set the VIDEO/MEMORY Switch to “MEMORY”, then set the Power Switch to “ ” while pressing down the Lock Button lo...
Page 35 - TO DELETE THE DISPLAYED FILE; TO DELETE ALL FILES
EN 35 TO DELETE THE DISPLAYED FILE Before doing the following, perform steps 1 through 3 on page 34. 4 Press + or – to select “CURRENT” and press SET/ SELECT . The Deletion Confirmation Screen appears. 5 Press + or – to select “EXECUTE” and press SET/ SELECT . The currently displayed file is deleted...
Page 38 - Initializing A Memory Card
38 EN FO MA T R FO MA T R E X S T I NG I E RAS E F I L E ? S A L L E X ECU T E – CANCE L T PROT ECDE L E E T DPOF A T FORM N RE T UR CANCE LE X ECU T E D.S.C. PLAYBACK (cont.) Display Initializing A Memory Card You can initialize a memory card anytime. After initializing, all files and data stored i...
Page 39 - USING MENUS FOR DETAILED ADJUSTMENT
EN 39 ADVANCED FEATURES ADVANCED FEATURES CONTENTS USING MENUS FOR DETAILED ADJUSTMENT ............. 40 – 46 For Recording Menu ................................................ 40 – 43 For Playback Menu ................................................. 44 – 46 FOR RECORDING ............................
Page 40 - For Recording Menu
40 EN OF F F ADER / I P E AM AE PROGR A CAMER L MANUA M S Y S T E DSC END AY D I S P L C AN E W W . BA L RE N E ON SC L CD / T V U A O T I ME T DA T E / T I ME CODE C LOCK AD J . ––– FF O 2 5 ’ 0 1 C E D 3 0 PM : 5 N RE T UR T Y QUA L I V G A F I NE – – E E L REC C T S – N RE T UR MODE SNAP ODE REC ...
Page 41 - Menu Screen Explanations
EN 41 Menu Screen Explanations CAMERA WIPE/FADER PROGRAM AE W.BALANCE REC MODE SOUNDMODE ZOOM GAIN UP DIS 12 BIT 16 BIT 10X 40X 200X OFF AGC AUTO OFF ON MANUAL TELEMACRO OFF ON SNAP MODE OFF5S ANIM. 5S Refer to “Fade/Wipe Effects” ( pg. 50, 51). Refer to “Program AE With Special Effects” ( pg. 48, 4...
Page 42 - MANUAL
42 EN WINDCUT Menu Screen Explanations (cont.) WIDEMODE Records with no change in the screen ratio. For playback on a TV with anormal screen ratio. Inserts black bands at the top and bottom of the screen. During playback onwide-screen TVs, the black bands at the top and bottom of the screen arecut a...
Page 44 - For Playback Menu; CONTINUED ON NEXT PAGE
44 EN M D O E SOUND M D O E 1 2 B I T RO S YNCH ODE REC M COP Y S T EREO – SOUND 1 S P OF F –––– N RE T UR O . O RE N E ON SC L CD / T V U A O T I ME T DA T E / T I ME CODE ––– F F O N RE T UR BE E P ME LODY N O T A L L Y ––– DEMO M ODE N O S OUND I N – C I M CAM E R S E T N RE T UR M S Y S T E AY D...
Page 45 - DISPLA
EN 45 Each setting is linked with “ DISPLAY” or “ SYSTEM”, which appears when the Power Switch is set to “ ” ( 墌 pg. 42, 43). The parameters are the same as in thedescription on pg. 42, 43. Menu Screen Explanations (cont.) DISPLA Y SYSTEM 墌 pg. 30 – 38 MEMOR Y 1 2 B I T / SOUND 1 S P 4 6 DEC 5 : 23 ...
Page 46 - Playback Sound
46 EN USING MENUS FOR DETAILED ADJUSTMENT (cont.) Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays thesound back. Select the type of sound to accompany your playback picture. According to the menu accessexplanation on pg. 44, select “SOU...
Page 47 - FOR RECORDING
EN 47 5 S – 5 S OF F AN I M . FOR RECORDING 5-Second Recording Record a vacation or an important event in 5-second clipsto keep the action moving. This function is available onlyfor video recording. 1 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lo...
Page 48 - Program AE With Special Effects
48 EN I C F I L HO M C L AS S S E P I A GH T TW I L I ONE MONOT SNOW S S POR T G I H T S POT L E S T ROB V I EC D EO OF F ER SHU T T 1/100 FOR RECORDING (cont.) Program AE With Special Effects 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Open theLCD monito...
Page 50 - and
50 EN FOR RECORDING (cont.) Fade/Wipe Effects These effects let you make pro-style scenetransitions. Use them to spice up the transitionfrom one scene to the next. You can also varytransitions from scene to scene. IMPORTANT: Some Fade/Wipe Effects cannot be used withcertain modes of Program AE with ...
Page 51 - Fader And Wipe Menu; Menu
EN 51 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in to a colour screen from a black and white screen, or fadeout from colour to black and white. Fade in or out with a full-screen mosaic effect. Wipe in on a black screen from the upper...
Page 54 - Exposure Control; Iris Lock
54 EN 3 Iris lock indicator BACKLIGHTButton FOR RECORDING (cont.) Exposure Control Manual exposure control is recommended in thefollowing situations:• When shooting using reverse lighting or when thebackground is too bright. • When shooting on a reflective natural backgroundsuch as at the beach or w...
Page 56 - Digital Sound Effects; SOUND EFFECT MODE SELECTION
56 EN F S F S F F 1 2 3 5 4 E X I T EXPLOSION 6 S O U N D APPLAUSE Digital Sound Effects 12 sound effects (EXPLOSION, SIREN, LAUGHTER,RACE CAR, DOOR BELL, BUZZER, FANFARE, AP-PLAUSE, CHEERS, BOING, SCREAM and JEERS) pre-stored in the provided memory card can be dubbed ontoa tape. SOUND EFFECT MODE S...
Page 57 - SOUND EFFECT RECORDING
EN 57 SOUND EFFECT RECORDING 6 Press D.SOUND during recording. The “ ” moves and the selected sound effect is recorded onto thetape.• The sound effect cannot be heard from the speaker during recording. Use a headphone set to hear thesound effect. To cancel recording the sound effect midway . . . ......
Page 58 - DUBBING; Dubbing To A VCR
58 EN DUBBING Dubbing To A VCR 1 Following the illustration, connect the camcorder andthe VCR. Also refer to pg. 24 and 25. 2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on theswitch, turn on the VCR’s power, and in...
Page 61 - CLIP REC
EN 61 - E M AR I E L A D CY L I P E - M R AE I C L OR CD L I I N P G E - M A S I T L AN CD L B I Y P E - MA I L C L I P COMPLETED e CAR O RECORD C L I P TO D T U P SH " SNAP SHOT " Play/PauseButton ( 4 / 6 ) Power Switch E-MAIL CLIP REC Button Dubbing Moving Images Recorded On ATape To A Mem...
Page 62 - Installing The Batteries; USING THE REMOTE CONTROL UNIT
62 EN 30 ° 30 ° 5 m (16 ft) 1 3 2 + – + – The Full-Function Remote Control Unit can operatethis camcorder from a distance as well as the basicoperations (Playback, Stop, Pause, Fast-Forward andRewind) of your VCR. It also makes additionalplayback functions possible. Installing The Batteries The remo...
Page 64 - Playback Zoom
64 EN USING THE REMOTE CONTROL UNIT (cont.) Press T Normal playback Left or SLOWRewind Button To move image, press (Right) while keepingSHIFT held down. PAUSE PLAY Zoom Buttons SHIFT Remote sensor Right or SLOWForward Button Up Button DownButton STOP FEATURE: Slow-Motion Playback PURPOSE: To allow s...
Page 65 - PLAY
EN 65 PLAY EFFECT EFFECT ON/OFF P L A O 12345 Y F B F ACK CMSSV L O ET I E ANPRD F S O I O E F STAB O E I O E C CN E T E C F H I O LM PLAYBACKEFFECT SelectMenu Remote sensor FEATURE: Playback Special Effects PURPOSE: To allow you to add creative effects to the videoplayback image. OPERATION: 1) To s...
Page 66 - Audio Dubbing
66 EN Audio DubStandby mode 6e PAUSE PLAY A.DUB STOP MIC USING THE REMOTE CONTROL UNIT (cont.) Audio Dubbing The audio track can be customized only when recordedin the 12-bit mode ( pg. 41). NOTES: ● Audio Dubbing is not possible on a tape recorded in16-bit audio, on a tape recorded in the LP mode o...
Page 67 - Audio Dubbing Using Digital Sound Effects
EN 67 PAUSE PLAY STOP 6e APPLAUSE D.SOUND Audio DubStandby mode Display Audio Dubbing Using Digital Sound Effects 1 Load the provided memory card ( pg. 16) and perform step 1 and 2 of page 66. 2 Press MENU . The Menu Screen appears. 3 Press + or – to select “ SYSTEM” and press SET/ SELECT . The SYST...
Page 68 - Insert Editing
68 EN PAUSE START/STOP INSERTPLAY REW 6w STOP 1 2 : 3 4 USING THE REMOTE CONTROL UNIT (cont.) Insert Editing You can record a new scene into a previously recordedtape, replacing a section of the original recording withminimal picture distortion at the in and outpoints. Theoriginal audio remains unch...
Page 69 - MBR SET; SHIFT
EN 69 MBR SET SHIFT 3 1 6 7 8 9 ` 42 5 VCR CODE LIST VCR BRANDNAME LG/GOLDSTAR 1 1 GE 1 1 9 2 9 ` 9 4 MAGNAVOX 9 5 1 1 7 1 7 6 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 PHILIPS 1 9 9 5 1 1 9 4 9 1 9 6 1 2 JVC 9 1 9 6 9 3 DAEWOO 1 8 HITACHI 6 6 6 3 ABC CODE VCR BRANDNAME PHILIPS 3 3 7 2 SAMSUNG 9 4 SANYO 3 6 3 ...
Page 70 - MAKE CONNECTIONS; A JVC VCR equipped with a Remote PAUSE
70 EN DISPLAY MAKE CONNECTIONS Also refer to pg. 24 and 25. 1 A JVC VCR equipped with a Remote PAUSE connector . . . ... connect the editing cable to the Remote PAUSE connector. A JVC VCR not equipped with a RemotePAUSE connector but equipped with an R.A.EDIT connector . . . ... connect the editing ...
Page 71 - SELECT SCENES
EN 71 1 2345678 – – : – – ~ ~~~~~~~ – – : – – 0 : 0 0 0 – – TOT A L CODE T I ME N I OU T MODE PLAY CANCEL R.A.EDITON/OFF FADE/WIPE EFFECT EDIT IN/OUT SELECT SCENES 4 Point the remote control at the camcorder’s remotesensor. Press PLAY ( 4 ) and then press R.A.EDIT ON/ OFF on the remote control. The ...
Page 72 - AUTOMATIC EDITING TO VCR
72 EN PAUSE START/STOP VCR REC STBY R.A.EDITON/OFF 12345 6 78 0 0 : 2 5 ~ 0 2 : 0 5 – – 0 7 : 1 8 ~ 0 8 : 3 1 – – – –0 3 : 3 3 ~ 0 5 : 5 3 1 3 : 1 5 1 5 : : 5 5 ~ ~ ~~ 1 6 : 2 9 – – – – – – – – – – – – N I OU T MODE 0 9 : 3 0 ~ 1 6 : 3 0 9 : 3 9 TOT A L CODE T I ME AUTOMATIC EDITING TO VCR 11 Rewind...
Page 73 - For More Accurate Editing; DIAGNOSING VCR/CAMCORDER TIMING
EN 73 R.A.EDITON/OFF 1 2345678 – – : – – ~ ~~~~~~~ – – N I OU T MODE RO S YNCH O . 1 – – – : – – 0 : 0 0 0 TOT A L CODE T I ME For More Accurate Editing Some VCRs make the transition from Record-Pause toRecord mode faster than others. Even if you begin editingfor the camcorder and the VCR at exactly...
Page 74 - SYSTEM CONNECTIONS; OR; Connection To A Personal Computer
74 EN SYSTEM CONNECTIONS To DV IN/OUT DV cable(optional) To DVconnector PC with DV connector PC To USB USB cable(optional) To USBconnector Core filter Core filter OR [A] Using USB cable [B] Using DV cable NOTES: ● It is recommended to use the AC Power Adapter/Charger as the power supply instead of t...
Page 76 - REFERENCES; Docking Station
76 EN REFERENCES REFERENCES CONTENTS DETAILS .................................................................... 77 TROUBLESHOOTING ............................................ 78 – 83 USER MAINTENANCE ................................................... 84 INDEX .......................................
Page 77 - DETAILS; I T E M S
EN 77 DETAILS I T E M S N O T E S ❍ Perform charging where the temperature is between 10°C and35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the idealtemperature range for charging. If the environment is too cold,charging may be incomplete. ❍ Charging times noted above are for a fully discharg...
Page 78 - SYMPTOM; TROUBLESHOOTING
78 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION TROUBLESHOOTING 1. No power is supplied. 2. “SET DATE/TIME!” appears. 3. Recording cannot beperformed. 4. There is no picture. 5. Some functions are notavailable using the MENU Button. 6. The focus does not adjustautomatically. 7. The cassette will not...
Page 84 - USER MAINTENANCE; PUSH HERE; Cleaning The Camcorder; Hatch
84 EN USER MAINTENANCE OPEN/EJECT Switch PUSH HERE Cassette holder Cleaning The Camcorder 1 To clean the exterior, wipe gently with a softcloth.Put the cloth in diluted mild soap and wring itwell to wipe off heavy dirt. Then wipe againwith a dry cloth. 2 Open the LCD monitor. Wipe gently with a soft...
Page 86 - Controls, Connectors And Indicators
86 EN INDEX Controls, Connectors And Indicators # 1 3 2 6 u 8 9 0 ! @ $%^ & * 4 5 e i y t E W o p R Y ( U ) q Q w O 7 r I P T
Page 88 - Indications; SO
88 EN INDEX Indications LCD Monitor/Viewfinder Indications During Video Recording Only 1 Appears when in the Squeeze or Cinema mode. ( 墌 pg. 42) 2 Displays the selected Fade/Wipe effect. ( 墌 pg. 50, 51) 3 Rotates while the tape is running. ( 墌 pg. 20) 4 Displays the recording mode (SP or LP). ( 墌 pg...
Page 90 - LCD Monitor/Viewfinder Indications During Video Playback; S EARC
90 EN INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback 1 Displays the sound mode. ( 墌 pg. 44, 46) 2 Displays the Blank Search mode. ( 墌 pg. 26) Displays the selected Digital Sound Effect. ( 墌 pg. 32, 56) 3 Displays the tape speed. ( 墌 pg. 15) 4 Appears while a tape ...
Page 91 - Warning Indications; TAPE END
EN 91 Indications Function Displays the battery remaining power.Remaining power level: highRemaining power level: exhaustedAs the battery power comes close to nil, the battery indicator blinks.When the battery power is exhausted, power turns off automatically. Appears when no tape is loaded. ( 墌 pg....
Page 92 - COPYING FAILED
92 EN Indications Function ● Appears if Insert Editing is attempted on a tape recorded in the LPmode. ( 墌 pg. 68) ● Appears if INSERT ( w ) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( 墌 pg. 68) ● Appears if dubbing of copyguarded signals is attempted while this...
Page 93 - CAUTIONS; Cassettes
EN 93 General Battery Precautions If the remote control is not functioning even if it isbeing operated correctly, the batteries are ex-hausted. Replace them with fresh ones. Use only the following batteries: AAA (R03) size x 2 Please make note of the following rules for batteryuse. When misused, the...
Page 94 - Memory Cards; While the memory card is being accessed (during; LCD Monitor; Be aware of the following phenomena for LCD; Main Unit; Dirty heads can cause the following problems:
94 EN CAUTIONS (cont.) Memory Cards To properly use and store your memory cards, besure to read the following cautions: 1. During use . . . .... make sure the memory card bears the SD or MultiMediaCard mark. .... make sure the memory card is positioned properly when inserting. 2. While the memory ca...
Page 95 - How To Handle A CD-ROM
EN 95 Declaration of ConformityModel Number : GR-DVP3U Trade Name : JVC Responsible party : JVC AMERICAS CORP. Address : 1700 Valley Road Wayne, N. J. 07470 Telephone Number : 973-315–5000 This device complies with Part 15 of FCC Rules.Operation is subject to the following twoconditions:(1) This dev...
Page 96 - TERMS
96 EN TERMS F Fade-In/Out ........................................ 墌 pg. 50, 51 Fast-Forward The Tape .............................. 墌 pg. 23 5-Second Recording Mode ....................... 墌 pg. 47 Frame-By-Frame Playback ........................ 墌 pg. 64 G Gain Up ....................................
Page 98 - SPECIFICATIONS; Camcorder; For General; For Digital Video Camera
98 EN SPECIFICATIONS Camcorder For General Power supply : DC 6.3 V (Using AC Power Adapter/Charger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx. 4.1 W LCD monitor on, viewfinder off : Approx. 5.0 W Dimensions (W x H x D) : 43 mm x 115 mm x 80 mm (1-3/4"...
Page 99 - For Connectors; Docking Station CU-V507U
EN 99 For Connectors AV Video output : 1 V ( p-p ) , 75 Ω , analog Audio output : 300 mV (rms), 1 k Ω , analog, stereo DV Input/output : 4-pin, IEEE 1394 compliant AC Power Adapter/Charger AA-V100U Power requirement U.S.A. and Canada : AC 120 V ` , 60 Hz Other countries : AC 110 V to 240 V ` , 50 Hz...
JVC GC-PX100
Manual
JVC GR-D20
Manual
JVC GR-D200
User Manual
JVC GR-D220
Manual
JVC GR-D225
Manual
JVC GR-D240
Manual
JVC GR-D246
User Manual
JVC GR-D290
Manual
JVC GR-D33
Manual
JVC GR-D340EK
User Manual
JVC GR-D70
Manual
JVC GR-D90
Manual
JVC GR-DF420
Manual
JVC GR-DF470
Manual
JVC GR-DF570
Manual