Jura F5 - Manuals - manualsarea.com

Page 4 - Control elements; Display dialog system

Control elements 1. Rotary Switch 2. Illuminated ring 3. ON/OFF key 4. Programming key 5. Draw-off key 1 cup 6. Draw-off key 2 cups 7. Maintenance key 8. Steam pre-selection key 9. Display dialog system 10. Water tank with carrying handle 11. Filler funnel for pre-ground coffee: 12. Bean tank cover ...

Page 5 - Contents

Contents 1. Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 1.1 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 1.2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 6 - The coffee machine may only be used by instructed persons.; Preparing the IMPRESSA

6 Introduction Thank you for purchasing the IMPRESSA. To ensure perfect func-tioning of your IMPRESSA, carefully read this operating manualand keep it for future reference. Should you need more information or if you encounter particularproblems not specified in these operating instructions in suffic...

Page 8 - Adjusting the water hardness

8 FILLING SYSTEM CLOSE TAP Close the steam / hot water draw-off tap (14). HEATING PRESS RINSE Press the maintenance key (7). Machine carries out a rinsing operation. RINSING READY If BEANS FILL is displayed, press the coffee draw-off keyagain. Machine not filled with coffee beans yet. To get an exce...

Page 11 - Drawing off 2 cups of coffee

11 10. Drawing off pre-ground coffee Never use instant coffee or quick-coffee. We recommendthat you always use powder from fresh coffee beans or, pre-ground, vacuum-packed coffee. Never fill in more than 2portions of powder. The pre-ground coffee tank is no storagetank. Make sure that the pre-ground...

Page 13 - Before CLOSE TAP, steam may still escape the system.; Dispensing Cappuccino with the; Press the steam pre-selection key

13 You can adjust the steam draw-off time individually by turningthe Rotary Switch (1) until the required SEC are displayed. For example, 35 SEC If you do not change the steam draw-off time settings using theRotary Switch (1), the machine will use the settings last adjusted During the steam draw-off...

Page 15 - Switching off the IMPRESSA; Programming key; Programming the filter

15 As long as STEAM READY os on view in the display, themachine is ready to dispense steam. Fill the container with 2.5 dl of fresh water.Dip the milk pipe into the container with the fresh water. When READY appears in the display, press the steam prese-lect key (8) again to set the machine in readi...

Page 18 - Programming the language

18 15.8 Cup counter You can check how many cups of the following coffee productswere drawn off: a) 1 cupb) 2 cupsc) Powder coffee READY Press programming key (4) until FILTER appears. The illuminated ring (2) is active. Turn the Rotary Switch (1) until CUPS MADE is displayed. CUPS MADE Now press the...

Page 21 - Emptying the system; switched off

21 16.9 Emptying the system Precondition: IMPRESSA switched off This operation is required to protect the IMPRESSA againstfrost damage during transports. Place a container under the Easy-Auto-Cappuccino Frother (15)(Fig. 10). Press the steam preselection key (8) until the following message is displa...

Page 23 - Tips for perfect coffee; Grinding degree

23 OPENTAP Open the steam / hot water draw-off tap (14) (Fig. 13). DE-SCALING CLOSE TAP After you have closed the steam / hot water draw off tap (14),the following message is displayed DE-SCALING EMPTYTRAY Empty the tray NO –TRAY Insert the tray again. PRESSRINSE Press the maintenance key (7). RINSI...

Page 26 - Legal information; Intensity of current:

26 23. Legal information These operating instructions contain all the information requiredfor using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained inthese operating instructions is required for using the machine safelyas well as for ope...