Jura 63942R - Manuals

Fig. 6 Fig. 7 Fig. 8 Fig. 3 Fig. 4 Fig. 5 Fig. 9 Fig. 10 Fig. 11 4 a. On/Off b. Rinse ( PRESS MAINT. ) c. 1-Cupd. 2-Cup e. Programmingf. Pre-Ground Coffee a b c d e f OperatingButtons a. Hot Waterb. Steam a b SELECT PRODUCT a. BIG CUP b. COFFEE c. ESPRESSO d. ST@RT e. MILD f. NORMAL g. STRONG a b c ...

Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 12 a b c Tip Metal Cylinder Clip-on Connector 6. Dual Frother Plus

Table of Contents 8. Important Safeguards / Jura-Capresso...............................2Illustrations.......................................................................4–71. Product Registration......................................................92. Customer Service .............................

1. PRODUCT REGISTRATION Please read the enclosed product registration form now. Fill itout and mail or fax it to us within two weeks after purchasingyour machine or register online through our website:www.capresso.com. Important: This registration is part of your warranty (chapter 23). 2. CUSTOMER S...

beans in the freezer, let them thaw for 3 to 4 hours before filling them into the bean container. • Never fill anything other than coffee beans into the bean con- tainer (no chocolate, rice, nuts, spices, etc.) • Never fill anything but fresh, cold clean water into the water container, except when d...

• Place a cup underneath the frother (Fig. 15) and push the Hot Water Button. SYSTEM FILLING The machine will pump some water through the frother and stop automatically. YOUR MACHINE IS HEATING PRESS MAINT. • Move the cup underneath the coffee spout (Fig. 14) and press the Rinse Button (Fig. 3b). MA...

Important: The grinding grade can only be adjusted while the grinder is actually grinding. Attention: Oily beans tend to stick together. Stir beans just before grinding to ensure a proper flow of beans into the burrs. 9. DAILY PREPARATION We recommend filling the water container every morning withfr...

16a. INSTALLING & ACTIVATING THE CLARIS WATER CARTRIDGE Important: Never install the cartridge before or during the first time preparation of the machine.• Make sure the water tank is empty.• Remove cartridge from its bag.• Open water container lid and pull up the holder for the Claris cartridge...

The machine beeps and the display shows: WATER PORTION INSERT FILTER • Place a large container underneath the frother (at least 30 oz.)• Push the Hot Water Button. The machine pumps water through the frother, activating the new filter. This will take about 90 seconds. During this time the display sh...

the three cup symbols are:BIG CUP: ............... 240 ML (8 oz.)COFFEE (cup): ....... 150 ML (5 oz.)ESPRESSO (cup): .. 60 ML (2 oz.)• Press the P-Button.• Touch the right arrow until the display shows WATER QUANTITY . • Touch ST@RT . The display shows SELECT PRODUCT and illuminates the three cup sy...

• Press the P-Button.• Touch the right arrow until the display shows WATER PORTION . • Place a cup or container underneath the frother (Fig. 15 ).• Touch ST@RT . The display shows PRESS KEY and the red light in the Hot Water Button illuminates. • Push the Hot Water Button. Hot water will be pumped t...

• Press the P button to return to SELECT PRODUCT . Please note : In order for the machine to turn off automatically it must be in the SELECT PRODUCT mode. If you leave the machine in programming mode (red arrows showing), or in anyother mode, the machine will not turn off automatically. 18j. SETTING...

• Open the ground coffee lid and drop in one white cleaning tablet (Fig. 24). • Push the Rinse button. The display shows MACHINE CLEANING . The cleaning program will dispense hot water in intervals through the coffee spout into the drawer. • When finished, the display shows EMPTY TRAY and the machin...

EMPTY TRAY . 12. Remove the container from underneath the frother. Remove the drawer, empty, rinse thoroughly and replace. The display shows PRESS MAINT . 13. Push the Rinse Button. The machine will run a regular rinse cycle, MACHINE RINSING and then the display will return to its normal position SE...

ground transportation for both ways within the continentalUnited States. For Hawaii and Alaska freight is not covered bythis warranty. TRANSPORT: When sending the machine, use the original pack- ing materials, the inner and outer cartons or use approximately 2”of bubblewrap and insert machine in a c...