Page 2 - IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautionsshould always be followed, including the following:1. Read all instructions.2. Do not touch hot surfaces. Use handles or knobs.3. To protect against fire, electric shock and personal injury, do not immerse cord, plugs or ...
Page 3 - CAUTION; Michael Kramm, President
NOTICE: Your Impressa F9 has a 3-prong grounded plug. Toreduce the risk of electrical shock this plug will fit in an outletonly one way. If the plug does not fit in the outlet contact aqualified electrician. DO NOT modify the plug in any way. CAUTION This appliance is for household use. Any servicin...
Page 4 - Used Coffee Container
1. Height-Adjustable Coffee Spout 2. Operating Buttons (See Fig. 3) 3. Removable Water Tank 4. Low Water Flotation Device (See Fig. 8.4) 5. Claris Water Care Cartridge (Not Installed) 5a. Service Plug 6. Lid for Water Tank 7. Ground Coffee Funnel 8. Lid for Ground Coffee Funnel 9. Lid for Bean Conta...
Page 5 - SELECT PRODUCT
Fig. 6 Fig. 7 Fig. 8 Fig. 3 Fig. 4 Fig. 5 Fig. 9 Fig. 10 Fig. 11 4 a. On/Off b. Rinse ( PRESS MAINT. ) c. 1-Cupd. 2-Cup e. Programmingf. Pre-Ground Coffee a b c d e f OperatingButtons a. Hot Waterb. Steam a b SELECT PRODUCT a. BIG CUP b. COFFEE c. ESPRESSO d. ST@RT e. MILD f. NORMAL g. STRONG a b c ...
Page 6 - Dual Frother Plus
Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 12 a b c Tip Metal Cylinder Clip-on Connector 6. Dual Frother Plus
Page 8 - Table of Contents
Table of Contents 8. Important Safeguards / Jura-Capresso...............................2Illustrations.......................................................................4–71. Product Registration......................................................92. Customer Service .............................
Page 9 - PRODUCT REGISTRATION; This registration is part of your; FAX; or; EMAIL; us at; WELCOME TO THE IMPRESSA F9; button and the F9 will grind and brew your
1. PRODUCT REGISTRATION Please read the enclosed product registration form now. Fill itout and mail or fax it to us within two weeks after purchasingyour machine or register online through our website:www.capresso.com. Important: This registration is part of your warranty (chapter 23). 2. CUSTOMER S...
Page 11 - All Display Messages Are Shown in GREEN; CUP ILLUMINATION; FILL SYSTEM WATER PORTION
beans in the freezer, let them thaw for 3 to 4 hours before filling them into the bean container. • Never fill anything other than coffee beans into the bean con- tainer (no chocolate, rice, nuts, spices, etc.) • Never fill anything but fresh, cold clean water into the water container, except when d...
Page 12 - Light roast
• Place a cup underneath the frother (Fig. 15) and push the Hot Water Button. SYSTEM FILLING The machine will pump some water through the frother and stop automatically. YOUR MACHINE IS HEATING PRESS MAINT. • Move the cup underneath the coffee spout (Fig. 14) and press the Rinse Button (Fig. 3b). MA...
Page 13 - Please note
Important: The grinding grade can only be adjusted while the grinder is actually grinding. Attention: Oily beans tend to stick together. Stir beans just before grinding to ensure a proper flow of beans into the burrs. 9. DAILY PREPARATION We recommend filling the water container every morning withfr...
Page 16 - Important
16a. INSTALLING & ACTIVATING THE CLARIS WATER CARTRIDGE Important: Never install the cartridge before or during the first time preparation of the machine.• Make sure the water tank is empty.• Remove cartridge from its bag.• Open water container lid and pull up the holder for the Claris cartridge...
Page 17 - ADJUSTING THE WATER HARDNESS
The machine beeps and the display shows: WATER PORTION INSERT FILTER • Place a large container underneath the frother (at least 30 oz.)• Push the Hot Water Button. The machine pumps water through the frother, activating the new filter. This will take about 90 seconds. During this time the display sh...
Page 19 - 8e. PROGRAMMING STEAM PORTION; 8f. PROGRAMMING WATER PORTION
the three cup symbols are:BIG CUP: ............... 240 ML (8 oz.)COFFEE (cup): ....... 150 ML (5 oz.)ESPRESSO (cup): .. 60 ML (2 oz.)• Press the P-Button.• Touch the right arrow until the display shows WATER QUANTITY . • Touch ST@RT . The display shows SELECT PRODUCT and illuminates the three cup sy...
Page 20 - 8g. SETTING THE TIME
• Press the P-Button.• Touch the right arrow until the display shows WATER PORTION . • Place a cup or container underneath the frother (Fig. 15 ).• Touch ST@RT . The display shows PRESS KEY and the red light in the Hot Water Button illuminates. • Push the Hot Water Button. Hot water will be pumped t...
Page 21 - 8j. SETTING LANGUAGE
• Press the P button to return to SELECT PRODUCT . Please note : In order for the machine to turn off automatically it must be in the SELECT PRODUCT mode. If you leave the machine in programming mode (red arrows showing), or in anyother mode, the machine will not turn off automatically. 18j. SETTING...
Page 23 - 0b. DECALCIFYING PROCEDURE
• Open the ground coffee lid and drop in one white cleaning tablet (Fig. 24). • Push the Rinse button. The display shows MACHINE CLEANING . The cleaning program will dispense hot water in intervals through the coffee spout into the drawer. • When finished, the display shows EMPTY TRAY and the machin...
Page 24 - All supplies are available through:
EMPTY TRAY . 12. Remove the container from underneath the frother. Remove the drawer, empty, rinse thoroughly and replace. The display shows PRESS MAINT . 13. Push the Rinse Button. The machine will run a regular rinse cycle, MACHINE RINSING and then the display will return to its normal position SE...
Page 25 - Other limitations and exclusions:
ground transportation for both ways within the continentalUnited States. For Hawaii and Alaska freight is not covered bythis warranty. TRANSPORT: When sending the machine, use the original pack- ing materials, the inner and outer cartons or use approximately 2”of bubblewrap and insert machine in a c...
