JL Audio SB-MA-3-SDN/10W3v3 - Manuals

JL Audio SB-MA-3-SDN/10W3v3 – Manual in PDF format online.

Manuals:

Manual

Manual JL Audio SB-MA-3-SDN/10W3v3

Summary

Page 2 - Continued on Next Page; s t e P 7; Place sealant sheet provided over modified area as shown; s t e P 4

Continued on Next Page SB-M-3-SPD/10W3v3 INSTR_SKU# 011255 s t e P 7 Remove Stealthbox® from packaging and install 3/8 X 2.25 mounting studs into threaded inserts at bottom of enclosure. Thread driver’s side stud in, leaving about 1 1/2-inches extended. Thread passenger side stud in, leaving only ab...

Page 3 - If you are installing this stealthbox® enclosure into a; Put tool panel into place as shown.

Continued on Next Page SB-M-3-SPD/10W3v3 INSTR_SKU# 011255 s t e P 1 4 Place foam floor supports into cargo area as shown. note that the foam supports have been changed since this photograph was taken to multiple square blocks. If you are installing this stealthbox® enclosure into a Mazdaspeed3, ple...

Page 4 - the following steps apply onlY if you are installing this

Continued on Next Page SB-M-3-SPD/10W3v3 INSTR_SKU# 011255 s t e P 2 0 Remove screws securing rearmost edge of plastic floor sup-port panel located across front of cargo area. install 7/8 inch spacers with #8 x 2.25 screws to lift rear edge of panel as shown s t e P 1 9 Place driver’s side cargo flo...