Jasco 19200 - Manuals

Jasco 19200 – Manual in PDF format online.

Manuals:

Manual Jasco 19200

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9

Summary

Page 2 - Chime Tune Setting; Single Push Button Kit:; If you purchased a kit with a single push button, the; Dual Push Button Kit:; If you purchased a kit with two push buttons, one push

Battery Release Tab 2. Install 4 C-cell batteries (we recommend Alkaline Batteries) 3. Remove back of wireless push button and install the 12-volt battery (included) as shown below. Chime Tune Setting All wireless chimes may have more than one push button. The chime tune for each push button is set ...

Page 4 - Note

Each component has jumpers for setting the house security code: The chime and pushbutton must be set to the same house security code for the combination to operate together. Note : The push button has 3 additional jumpers that are used to set the chime tune that will play. The chime tune jumpers do ...

Page 5 - Jumpers 1-6 are used to select 1 of 64 possible home security codes.; Push Button Mounting Instructions; Avoid mounting the push button on metal surfaces, as it may result; a. Removing the back cover

3. Locate the House Security Code door and screw located on the back of the AC Chime. Remove the screw and take off the door. 4. Locate the chime and pushbutton jumpers shown below. Push Button Jumpers Chime Jumpers in battery compartment 5. Jumpers 1-6 are used to select 1 of 64 possible home secur...

Jasco Manuals