JAI CV-L105 - Manuals - manualsarea.com

Page 2 - Table of Contents

CV-L105 - 1 - Table of Contents 1. General ........................................................................................................ 2 2. Standard Composition ...................................................................................... 2 3. Main Features .......................

Page 7 - Fig. 6. Input receiver circuit for EXT TRIG

CV-L105 5.4.2. Trigger input The camera is triggered by an EIA-644 LVDS input signal pair. (+EXT TRIG in/ -EXT TRIG in (on pin #19 and pin #53)). Depending on the configuration of the camera, this input can provide operation in 4 modes: Internal Trigger. Scan mode. Internal Trigger. Shutter mode. Ex...

Page 8 - Functions and Operations; Area

CV-L105 6. Functions and Operations 6.1. Principle of operation A line scan camera works according to the same principle as a fax machine, also sometimes referred to as a “push broom” operation. It captures a single line at a time (horizontal), and requires either the object or the camera to be movi...

Page 11 - Important notes on using this mode:

CV-L105 6.2.1. Internal Trigger. Scan mode. In this mode, the camera does not require an EXT TRIG signal to be issued to the camera. The line rate (scan rate) is generated inside the camera. The camera will operate continuously with its internal trigger. The exposure time is equal to the scanning ti...

Page 16 - Configuring the Camera; Communication setting.; Baud Rate

CV-L105 7. Configuring the Camera All configuration of the CV-L105 camera is done via the RS-232C port, which is factory setting. Binning and pixel rate settings can also be controlled by TTL signals into the interface connector or internal jumpers. From the factory, the camera will start up with th...

Page 18 - Fig. 20 Communication and File windows

CV-L105 7.1.6. Gain and offset adjustment Fig. 19. Gain and Offset window The individual gain and offset setting of each color is possible. This is required for adapting the white balance temperature for the 4 user configuration areas. For the factory default this setting has no function. It can onl...

Page 19 - S O; O O H O H; O S H; Pixel clock select by JP5; Top

CV-L105 7.2. Configuration via I/F connector and jumpers The binning function, pixel rate and RS-232C function can be controlled by TTL inputs on the 68pin Hirose interface connector and with jumper settings. Below table describe the possible states of these inputs. Please refer to fig. 7. for princ...

Page 20 - External Appearance and Dimensions

CV-L105 - 19 - 8. External Appearance and Dimensions Fig. 22. Outlines

Page 21 - Specifications

CV-L105 9. Specifications 9.1. Specifications table Specifications CV-L105 Scanning system Line scan Pixel clock 15 or 30 MHz, user selectable Line rate (scan rate) Up to 7172 lines/sec at 15 MHz, and up to 14285 lines/sec at 30 MHz CCD sensor 3 x 2048 line scan sensors mounted on an RGB prism Sensi...

Page 22 - DECLARATION OF CONFORMITY; AS DEFINED BY THE COUNCIL DIRECTIVE

CV-L105 10. Users Record Camera type: CV-L105 Revision: (Revision A) Serial No. …………….. Software version. …………….. For camera revision history, please contact your local JAI distributor. Users Mode Settings. Users Modifications. DECLARATION OF CONFORMITY AS DEFINED BY THE COUNCIL DIRECTIVE 89/336/EEC...