Integra DTR-30.6 - Manuals

5 Step 1: Connections 2 Connecting speakers Important : The power cord must be connected only after all other connections are completed. 45 78 12 9F 6 3 1 2 Front speakers 3 Center speaker 4 5 Surround speakers 6 Subwoofer 7 8 Surround back speakers 9 F Height speakers • 5.1 ch: 1 2 3 4 5 6 • 7.1 ch...

Step 2: Setting Up 6 Step 1: Connections 1/2"-5/8"(12-15 mm) Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal. Make correct connection between the unit's jacks and speaker's jacks (+ to + and - to -) for each channel. If conn...

7 Step 2: Setting Up Important : When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN jack of the unit via HDMI connection. 1 Turning the power on Conn...

8 Step 2: Setting Up 2. After placing the microphone at the measurement position, select "Do it Now" in the start screen and press Enter. 3. Connect the microphone to the Setup Mic jack of the unit. Setup Mic jack Speaker setup microphone 4. Follow the guidance displayed on the TV screen. Ac...

9 Step 2: Setting Up  4th Step : Network Connection Do you want to connect network connection?It gives you network services that our AV receiver support. If you wish to skip this step.select “No. Skip”. YesNo. Skip HOME Exit Initial Setup Network Connection You can check the network connection and ...

Step 3: Playing Back 10 1 Playing the player and TV  To control the unit : You can control any other device than this unit if you register the specified remote control code to 3 Remote Mode. As the remote controller may be in the remote mode that enables control of other devices, be sure to press 2...

11 Step 3: Playing Back Listening modes Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. Movie/TV : You can select a listening mode suitable for movies and TV programs. Music : You can select...

12 Step 3: Playing Back 3 Connecting and playing the Bluetooth-enabled device You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is 48 feet (15 meters). • The Bluetooth-enabled device needs to support the A2DP profile. • Note that connect...

13 Step 3: Playing Back  USB : Select "USB" in the TV screen and connect a USB storage device to the USB port on the front panel. On the TV screen, select the desired folder or music file with the cursors of the remote controller and press Enter to confirm and start playback. • "USB"...

14 Step 3: Playing Back 6 Using the multi-zone function The function allows you to connect the unit with an audio equipment placed in a separate room so that you can enjoy audio of the connected equipment even if you are staying in a different room. It is possible to perform playback in the main roo...

15 Step 3: Playing Back Performing Multi-zone Playback 1. Press Zone2 on the remote controller, point the remote controller at the remote controller sensor and press z Receiver. "Z2" stays lit on the main unit display and the multi-zone function is enabled. 2. Press Zone2 again on the remote...

16 1 2 4 3 J K 5 7 6 8 9 F G I N M L S T Q O P H R (Australian model) Front Panel 1 z On/Standby button : Turns the unit on or into standby mode. 2 Bluetooth indicator : Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed. 3 Wi-Fi indicator : ...

17 1 4 G 2 3 5 6 7 8 9 F I J H K L M Rear Panel 1 RI REMOTE CONTROL jack : An Onkyo product with RI jack can be connected and synchronized with this unit. 2 FM ANTENNA jack (75 Ω) and AM ANTENNA terminal : The supplied antennas are connected. 3 COMPONENT VIDEO IN/OUT jacks : Component video input/ou...

Troubleshooting 18 1 4 6 2 3 7 5 9 8 Display 1 Stays lit or flashes in the following conditions. "Z2": Zone 2 output is on. "HDMI": HDMI signals are input and the HDMI input selector is selected. "ARC" (Audio Return Channel): Audio signals are input from the ARC compatible TV...

Specifications 20 Amplifier Section Rated Output Power All channels: 95 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC) 115 watts minimum continuous power per channel, 6 ohm loads, 2 channels dri...

21 License and Trademark Information Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & D...

22 DISCLAIMER Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, “Company”). We have no control over the nature, content ...