InFocus SP-CEIL-UNIV - Manuals

Page 2 - Parts List; Description; FASTENERS

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 2 of 11 Parts List Before you start check the parts list to insure all of the parts shown are included. A Q Description Qty. Part Number A projector mount assembly 1 055-0420 B 4 mm security allen wrench 1 56...

Page 3 - Installation To Wood Joist Finished Ceilings, Exposed; For optional Cord Management,; WARNING

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 3 of 11 F F Q WOODJOIST CEILING Drill two 5/32" (4 mm) dia. holes to a minimum depthof 2.5" (64 mm). Attach ceiling plate ( Q ) with two #14 x 2.5" (6 mm x 65 mm) wood screws ( F ) as shown using ...

Page 4 - Illustration A; Installation to Concrete Ceilings; Alligator; not

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 4 of 11 Drill two 1/4" (6 mm) dia. holes to a minimum depth of2.5" (64 mm). Attach ceiling plate ( Q ) using two concrete anchors ( G ) and #14 x 2.5" wood screws ( F ) as shown in Illustration A ...

Page 5 - Flush Mount Installation; or; figure 2; depending; figure 1; • Tighten wood screws so that projector mount assem-

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 5 of 11 Flush Mount Installation Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach projector mount assembly ( A ) with two #14 x 2.5" (6 mm x 65 mm) wood screws ( F ) an...

Page 6 - four holes in the ceiling plate (; See; Screw projector mount assembly (; detail 4; will be required as shown in; detail 5; Swivel stop screw is used to jam against; DETAIL 3; DETAIL 4

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 6 of 11 Screw extension column (sold separately) toceiling plate ( Q ). Align the notch with one of the four holes in the ceiling plate ( Q ) and secure extension column with a M5 x 10 mm socket pinscrew ( M ...

Page 7 - Installation to; DETAIL 7; retaining collar in ceiling; detail 7; DETAIL 6; DETAIL 8

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 7 of 11 Installation to Lightweight Suspended Ceiling Plate (EXT-LTMT-PLTB) DETAIL 7 EXTENSIONCOLUMN(UL LISTED) Refer to instruction sheet for lightweightsuspended ceiling plate (soldseparately) for attachmen...

Page 8 - ) to connection block from; Attach extension brackets (

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 8 of 11 Note: The projector adapter plate and projector you are installing may differ in appearance from the sample illustrated below. Align shoulder on connection block opposite of front of projector. Attach...

Page 9 - ) to projector using three M4 x 16 mm serrated socket pin

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 9 of 11 Flip projector upside down. Find your projector from the models listed below. Using the holes indicated on the corre-sponding hole pattern diagram, attach adapter plate ( R ) to projector using three ...

Page 10 - ) as shown. Tighten captive screw to secure; IMPORTANT; projector mount assembly (

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 10 of 11 Slide connection block with projector into projector mountassembly ( A ) as shown. Tighten captive screw to secure projector to projector mount assembly ( A ). IMPORTANT : For security installations,...

Page 11 - To adjust yaw (swivel) for extension column applications; Projector Alignment

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 11 of 11 To adjust yaw (swivel) for wood stud, concrete ceiling, and threaded rod mounting applications : Loosen wood screws ( F ), or locknuts for threaded rods, until projector mount can be rotated. Rotate ...