InFocus SP-CEIL-UNIV - Manual
InFocus SP-CEIL-UNIV – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Parts List; Description; FASTENERS
- Page 3 – Installation To Wood Joist Finished Ceilings, Exposed; For optional Cord Management,; WARNING
- Page 4 – Illustration A; Installation to Concrete Ceilings; Alligator; not
- Page 5 – Flush Mount Installation; or; figure 2; depending; figure 1; • Tighten wood screws so that projector mount assem-
- Page 6 – four holes in the ceiling plate (; See; Screw projector mount assembly (; detail 4; will be required as shown in; detail 5; Swivel stop screw is used to jam against; DETAIL 3; DETAIL 4
- Page 7 – Installation to; DETAIL 7; retaining collar in ceiling; detail 7; DETAIL 6; DETAIL 8
- Page 8 – ) to connection block from; Attach extension brackets (
- Page 9 – ) to projector using three M4 x 16 mm serrated socket pin
- Page 10 – ) as shown. Tighten captive screw to secure; IMPORTANT; projector mount assembly (
- Page 11 – To adjust yaw (swivel) for extension column applications; Projector Alignment
ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06
Visit the InFocus Web Site at www.infocus.com
1 of 11
Read instruction sheet before you start installation and assembly.
Maximum Load Capacity: 25 lb (11 kg)
Installation and Assembly -
All-in-one Projector Adapter Plate for
InFocus
®
Projectors
Model: SP-CEIL-UNIV
R
IMPORTANT! Turn to the appropriate page for your ceiling installation.
This product is intended for use with UL
Listed products and must be installed
by a qualified professional installer.
Applications:
Flush Mount ................................................................................................................................................. page 5
Extension Column ........................................................................................................................................ page 6
Lightweight Suspended Ceiling Plate ....................................................................................................... page 7
Installations:
To Wood Joist Finished Ceilings,
Exposed Wood Joists, or Wood Beam Ceilings ........................................................................................ page 3
To Concrete Ceilings .................................................................................................................................... page 4
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard-
ware and components.
WARNING
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 2 of 11 Parts List Before you start check the parts list to insure all of the parts shown are included. A Q Description Qty. Part Number A projector mount assembly 1 055-0420 B 4 mm security allen wrench 1 56...
ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 3 of 11 F F Q WOODJOIST CEILING Drill two 5/32" (4 mm) dia. holes to a minimum depthof 2.5" (64 mm). Attach ceiling plate ( Q ) with two #14 x 2.5" (6 mm x 65 mm) wood screws ( F ) as shown using ...
ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06 Visit the InFocus Web Site at www.infocus.com 4 of 11 Drill two 1/4" (6 mm) dia. holes to a minimum depth of2.5" (64 mm). Attach ceiling plate ( Q ) using two concrete anchors ( G ) and #14 x 2.5" wood screws ( F ) as shown in Illustration A ...
