InFocus INF7021/INF8021 - Manuals

Page 5 INF7021/INF8021 Hardware Guide Safety Considerations Please read and follow all safety instructions provided below and on the monitor before connecting the monitor to a power source. Failure to comply with safety instructions may result in fire, electrical shock, or personal injury and may da...

Page 6 • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the monitor. • Unplug the monitor if you are not going to use it for an extensive period of time.• Unplug the monitor if you need to clean it with the inc...

Page 7 INF7021/INF8021 Hardware Guide What’s Included Quick Setup Guide HOME INFO RESIZE VOL UP VOL DOWN BACK MUTE CONTRAST BRIGHTNESS INPUT MENU OK POWER i *Not included for all countries. For setup purposes, a keyboard and mouse are recommended. For additional accessory options, such as stands, fe...

Page 8 Setup Attaching the Speakers The speakers can be installed as desired around the perimeter of the monitor using the supplied brackets, however InFocus recom-mends installing the speakers across the bottom of the monitor. NOTE: If you are not attaching the speakers, proceed to the next section...

Page 9 INF7021/INF8021 Hardware Guide 4) Connect one end of the AC power cord to the AC In jack on the back of the speakers. 5) Connect the other end of the AC power cord to the AC Out jack on the bottom connector panel of the monitor. ON/OFF POWER SUB L INPUT 6) Plug the speakers’s audio cable into...

Page 10 Connecting to Other Devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of the monitor. Available jacks include: HDMI In (2), HDMI Out (1), PC In (1), Composite Video (1), Component RCA (1), RS232 (1)...

Page 11 INF7021/INF8021 Hardware Guide Connecting AC Power 1) Connect one end of the AC power cord to the AC In jack on the back of the monitor. 2) Connect the other end of the AC power cord to an AC outlet. 3) Press the power switch. (The LED on the front of the monitor turns on.) NOTES: • Your mon...

Page 12 Setting up the Wireless Mouse and Keyboard NOTE: The wireless mouse and keyboard is not included as a standard accessory for some countries. For initial setup and/or configu- ration, it may be easier to use a mouse and keyboard. Any standard wired or wireless mouse or keyboard can be connect...

Page 13 INF7021/INF8021 Hardware Guide Using the Remote The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover. To operate, point the remote at...

Page 14 The remote has the following buttons: HOME INFO RESIZE VOL UP VOL DOWN BACK MUTE CONTRAST BRIGHTNESS INPUT MENU OK POWER i POWER Power: Switches the power on or puts the monitor into Standby. HOME Home: Changes the active source back to the embedded PC. INPUT Input: Toggles the Input Source ...

Page 15 INF7021/INF8021 Hardware Guide Using the Keypad The keypad, located on the side of the monitor, has the following buttons: VOL VOL ^ CH CH ^ MENU INPUT ^ ^ Power button: Switches the power on or puts the monitor into Standby. OK/SOURCE button: Turns the Source menu on allowing the user to ch...

Page 17 INF7021/INF8021 Hardware Guide Picture Menu Sel Adjust Enter Back Quit < > < < PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR TEMPERATURE COLOR CONTROL PICTURE MODE PICTURE RESET NATIVE STANDARD NO 70 50 50 50 50 50 RED GREEN BLUE Brightness: changes the intensity of the image. Rang...

Page 18 Screen Menu Sel Adjust Enter Back Quit < > < < SCREEN H POSITION V POSITION CLOCK CLOCK PHASE ASPECT RATIO SCREEN RESET 50 50 50 0 WIDE NO H Position: adjusts the horizontal position of the image. Range: 0-100. (Default 50.) V Position: adjusts the vertical position of the image....

Page 19 INF7021/INF8021 Hardware Guide Audio menu Sel Adjust Enter Back Quit < > < < AUDIO SPEAKER AUDIO SOURCE AUDIO RESET INTERNAL PC SPEAKER NO Speaker: controls whether both the internal and external speakers (sound bar, etc.) or just external speakers are used. Options in- clude: In...

Page 20 Picture in Picture menu Sel Adjust Enter Back Quit < > < < PICTURE IN PICTURE PIP SIZE PIP AUDIO PIP RESET SMALL MAIN NO PIP Size: changes the size of the PiP window used in the Corner-to-Corner configuration. Options include: Small (default), Middle and Large. PIP Audio: switche...

Page 21 INF7021/INF8021 Hardware Guide Configuration 1 Sel Adjust Enter Back Quit < > < < CONFIGURATION 1 LANGUAGE AUTO SOURCE CONFIGURATION RESET FACTORY RESET ENGLISH NO NO NO Language: switches the OSD menu language. Auto Source: automatically adjusts the display of an external VGA so...

Page 22 Configuration 2 Sel Adjust Enter Back Quit < > < < CONFIGURATION 2 OSD TURN OFF OSD H-POSITION OSD V-POSITION MONITOR INFORMATION 45 50 50 OSD Turn Off: controls how many seconds the OSD menu remains on the screen Range: 5-120 (seconds). (Default: 45) OSD H-Position: adjusts the ...

Page 23 INF7021/INF8021 Hardware Guide Advanced Option Sel Adjust Enter Back Quit < > < < ADVANCED OPTION GAMMA SELECTION OVER SCAN IR CONTROL KEYBOARD CONTROL DDC/CI ADVANCED OPTION RESET MODE1 ON NORMAL UNLOCK ON NO Gamma Selection: adjusts the gamma value of the image and optimizes im...

Page 24 Troubleshooting Symptom Possible Solutions No power • Verify the power cord is properly connected to the power outlet and to the monitor. • Verify the power switch is ON and that the Power button on the remote or keypad has been turned on (the front LED should be white). • Plug another elect...

Page 27 INF7021/INF8021 Hardware Guide Specifications To read the latest product specifications, be sure to visit our support website at www.infocus.com/support, as specifications are subject to change. Model INF7021 INF8021 Size (viewable) 69.38" (173.67cm) diagonal 79.88" (202.88cm) diagon...

Page 29 INF7021/INF8021 Hardware Guide Limited Warranty InFocus Limited Warranty For InFocus Branded Hardware Products Only LIMITED WARRANTY. InFocus’s warranty obligations for the hardware products are limited to the terms set forth herein. InFocus war- rants the InFocus-branded hardware products a...

Page 30 temporary procedures or workarounds provided by InFocus while InFocus works on permanent solutions. • Allow InFocus to keep resident on your systems or sites certain system and network diagnosis and maintenance tools to facilitate the performance of warranty support (collectively referred to...

Page 31 INF7021/INF8021 Hardware Guide DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UN- DER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFI...

Page 32 defective part must be returned to InFocus. In cases where it is required to return the defective part to InFocus, you must ship the defective part back to InFocus within a defined period of time, normally five (5) business days, and clearly display the Return Material Authorization (RMA#) o...