InFocus IN118HDxc - Manuals

5 Connector panel The projector provides both computer and video connection options. IN112x/IN114x/IN116x/IN118HDx/IN119HDx: • VGA computer (2) • Composite video • HDMI • S-video • USB connector for firmware upgrades, mouse control and Screen Save mode. • Monitor out, for VGA pass through to an exte...

6 Positioning the projector To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines: • Position the projector on a flat surfac...

8 Connecting a computer source VGA connection Connect one end of the provided computer cable to th Computer 1/Computer 2 connector on the projector and the other to the VGA connector on your computer. If you are using a desktop computer, you will need to disconnect the monitor cable from the compute...

9 Displaying an image Press the Power button. The Power LED blinks green, and the fans start to run. When the lamp comes on, the start up screen displays and the Power LED turns solid green. It can take up to a minute for the image to achieve full brightness. Note: When the feature, AC Power On, is ...

10 Adjusting the image If necessary, adjust the height of the projector by rotating the elevator foot to extend the foot. If necessary, rotate the leveling foot located at the rear of the projector. Avoid placing your hands near the hot exhaust vent at the front of the projector. Position the projec...

11 Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers, and TV tuners to the projector. You can connect the audio directly to the projector to get sound from the built-in speaker, or you can bypass the pr...

12 Shutting down the projector Auto Off Time The projector also has an Auto Off Time feature that automatically turns the projector off after no active sources are detected and no user interaction with the projector is performed for 30 minutes. By default, this feature is off. You can change the len...

13 Problem Solution Result No start up screen Plug power cord into the projector press the Power button Correct image Only start up screen appears Press the SOURCE button activate laptop’s external port Computer image projected Startup Screen A Startup Screen Restart laptop A A

19 Still need assistance? If you need assistance, visit our website at www.infocus.com/support or call us. See the Quick Start Guide for support contact information.This product is backed by a limited warranty. An extended warranty plan may be purchased from your dealer. When sending the projector i...

20 Using the remote control The remote uses two (2) AAA batteries (not provided). They are easily installed by removing the cover from the remote’s back, aligning the + and - ends of the batteries, sliding them into place, and then replacing the cover. Caution : • When replacing the remote batteries...

21 Using the audio Using the projector’s speakers Connect the audio source to the Audio 1/Audio 2 connectors to hear audio through the projector speakers. Amplified speakers may also be connected to the projector using the Audio Out connector. To adjust the volume, press the Volume buttons on the re...

22 Using the keypad buttons Most buttons are described in detail in other sections, but here is an overview of their functions: Power –turns the projector on and off (page 9). Right arrow - When the menu is displayed, the right arrow button navigates through the menu. Up arrow/Keystone - When the me...

23 Optimizing computer images After the projector is running and the image is on the screen, you can optimize the image using the onscreen menus. For general information on using the menus, see page 25.• Select default image settings using a preset appropriate to your environment. • Adjust the Keyst...

25 Using the menus 1 To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) Use the arrow buttons to move up and down to review the menu options. 2 To enter a submenu, highlight the desired submenu and press > ...

31 Maintenance Cleaning the lens 1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. • Projector must be off and the lens must be at room temperature.• Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens. Abrasive cleaners, solvents or other hars...

32 Replacing the projection lamp The Lamp Hours timer in the Projector Info menu counts the number of hours the lamp has been in use.• NOTE : Be sure to use the InFocus lamp module designed for this projector. You can order new lamps from www.infocus.com (in select areas), your retailer or your deal...

34 Numerics 3D Sync Invert 27 A AC Power On 29 Aspect Ratio 26 Audio 1/Audio 2 8 Auto Image 26 Auto Off Time 30 Auto Source 29 AV Mute 28 B Blank Key 28 Blank Screen 28 Brightness 26 C Cable box 11 Ceiling Mount 26, 28 Closed Captions 28 Color Space 27 Computer 1 28 Computer 1/Computer 2 8 Computer ...