Page 2 - Positioning; Installation
2 G B ! Before operating your new appliance please read this instruction booklet carefully. It contains important information for safe use, installation and care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. P...
Page 3 - Electrical connection
G B 3 Front 40 Clamp Position for Back H=40mm top ! Use the clamps contained in the "accessory kit." In the event the cooktop is not installed above a built-in oven, a wood panel must be inserted as insulation. This panel must be placed at least 20 mm from the bottom of the cooktop itself....
Page 4 - Gas Connection
4 G B Gas Connection The cooktop should be connected to the gas supply by an authorized installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the app...
Page 6 - Characteristic of the burners and nozzles
6 G B Characteristic of the burners and nozzles Table 1 Liquid Gas Natural Gas Burner Diameter (mm) Thermal power kW (p.c.s.*) By-Pass 1/100 Nozzle 1/100 Flow* g/h Nozzle 1/100 Flow* l/h Nomin. Ridot. (mm) (mm) *** ** (mm) Fast (R) 100 3,00 0,70 41 87 218 214 128 286 Semi Fast (S) 75 1,90 0,40 30 70...
Page 7 - Description of the appliance; Overall view
G B 7 Description of the appliance Overall view Gas Burners Support Grid for Cookware Control Knobs for Gas Burners Ignition Button for Gas Burners Ignitor for Gas Burners
Page 8 - Practical Advise on Using the Burners
8 G B The position of the corresponding gas burner is indicated on each control knob. Gas Burners The burners differ in size and power. Choose the most appropriate one for the diameter of the cookware being used. The burner can be regulated with the corresonding control knob by using one of the foll...
Page 9 - Precautions and tips; General safety
G B 9 Precautions and tips ! This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. General safety This manual is for a class 3 built-in cooktop. Gas appliances requir...
Page 10 - Switching the appliance off; Maintenance and care; Greasing the Taps
10 G B Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Cleaning the appliance ! Do not use abrasive or corrosive detergents, stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratc...
Page 11 - Assistance
G B 11 Assistance It may occur that the cooktop does not function or does not function properly. Before calling customer service for assistance, lets see what can be done. First of all, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas ...