Indesit IDTM - Manuals - manualsarea.com

Page 2 - Installation

2 EN Keep this instruction manual in a safe place for future reference. If the appliance is sold, given awayor moved, please ensure the manual is kept with themachine, so that the new owner may benefit from theadvice contained within it. Please read this instruction manual carefully: it contains imp...

Page 3 - Technical data

3 EN Connecting the water outlet hose Connect the outlet hose (without bending it) to adrain duct with a minimum diameter of 4 cm.Alternatively, rest it over a sink or tub; the free endof the hose should not remain immersed in water. The special plasticelbow* makes it easier tofind the best layout: ...

Page 5 - Description of the appliance

5 EN Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. Washing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate * Only available in selected models. 3 1 Control panel De...

Page 6 - Loading the racks

6 EN stops ( see figure). If the rack is equipped with the clickclack handles* ( see figure), pull them upwards or downwards toadjust the height. Loading examples for the upper rack Loading examples for the lower rack Just you Tip-up compartments** These special tip-upcompartments can be used toarra...

Page 8 - Wash cycles

8 EN Wash cycle table Note To make it easier to measure out the detergent, it is worth remembering that:1 tablespoon = 15 grams of powder = approximately 15 ml of liquid1 teaspoon = 5 grams of powder = approximately 5 ml of liquid INDESIT dishwashers are equipped with an automatic filter cleaning sy...

Page 9 - Rinse aid and refined salt

9 EN Only use products that have been specifically designed for dishwashers.Do not use table salt or industrial salt. If using a multi-functional product (2-in-1, 3-in-1, 4-in-1) it is not necessary to add rinse aid; however, werecommend that you add salt, especially if you live inan area where the ...

Page 10 - Care and maintenance

10 EN Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle toavoid leaks. • Remove the plug from the socket when cleaningthe machine and when carrying out maintenancework. Cleaning the dishwasher • The external surfaces of the machine and thecontrol panel m...

Page 11 - Precautions and advice

11 EN The appliance was designed and manufactured in compliance with current international safetystandards. The following information has beenprovided for safety reasons and should therefore beread carefully. General safety • The appliance was designed for domestic useinside the home and is not inte...

Page 12 - Troubleshooting

12 EN Whenever the appliance fails to work, check for a solution from the following list before calling for TechnicalAssistance Centre. Troubleshooting Malfunction: The dishwasher does not start. No water enters the dishwasher. No water drains out from the dishwasher. The dishwasher makes excessive ...