Indesit ICD - Manuals

      4   4. Prior using for the first time NOTE: If your model have no water softener, you may skip this section. A. Loading the Salt Into the Softener Always use salt intended for use with dishwasher. The salt container is located beneath the basket and should be filled as follows: Attention „ Onl...

      5   (Rinse-Aid indicator) Attention! Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance. When to Refill the Rinse Aid Dispenser If there is no rinse-aid warn...

      6   Normally new pulverised detergent is without phosphate. The water softener function of phosphate is not given. In this case we recommend to fill salt in the salt container even when the hardness of water is only 6'dH. If detergents without phosphate were used in case of hard water often wh...

      7   WARNING! Dishwasher detergent is corrosive! Take care to keep it out of reach of children. Proper Use of Detergent Use only detergent specifically made for use in dishwashers. Keep your detergent fresh and dry. Don't put powder detergent into the dispenser until you're ready to wash dishes...

      8   Attention before or after loading the Dishwasher Baskets (For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets and cutlery baskets may vary from your model.) Scrape off any large amounts of leftover food. Soften remnants of burnt food ...

      9   Cutlery Basket Cutlery should be placed in the cutlery basket with handles at the bottom. If the rack has side baskets, the spoon should be loaded individually into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper basket ...

      10   When load bigger Dinner Plates Plate racks of Basket When load bigger Dinner plates, please fold the rack to left picture showed location. The maximum plate can be loaded is 270mm (10 inches) diameter.

      11   6. Starting a washing programme Wash Cycle Table NOTE: „ (  ) Means: need to fill rinse into the Rinse-Aid Dispenser. „ *En 50242: This program is the test cycle, the rinse-aid dispenser setting is recommended to Position 6. Program Cycle Selection Information Description of Cycle Deterg...

      12   Change the Programme... Premise: You can modify the washing program, When the dishwasher just runs for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be ref...

      13   7. Maintenance and Cleaning Filtering System The filter prevent larger remnants of food or other objects from getting inside the pump. Filter assembly The filter efficiently removes food particles from the wash water, allowing it to be re-cyclated during the cycle. For best performance an...

      14   Remarks: - Inspect the filters for blocking every time the dishwasher has been used. - By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters under running water. NOTE: The entire filter assembly should be cleaned once a week. Cle...

      15   Cleaning the Spray Arms The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging. Wash them under running water and carefully replace them in their seats, checking that their rotary movement is in no way impeded. Grasp the middle of the spray...

      16   Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to fa...

      17   Connection of drain hoses Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance. The free end of the hose must be at a height lower tha...

      19   9. Troubleshooting Tips Before Calling for Service Review the charts on the following pages may save you from calling for service. Problem Possible Causes What To Do Fuse blown, or the circuit breaker tripped. Replace fuse or reset circuit breaker. Remove any other appliances sharing the ...

      20   Problem Possible Causes What To Do The dishes were not loaded correctly. The programme was not powerful enough. Not enough detergent was dispensed. Item are blocking the path of spray arms. See notes in " Loading the Dishwasher Baskets ". Select a more intensive programme. See"...

      21   Technical Information Height: 438mm Width: 550mm Depth: 500mm Voltage connected Load: see rating label Water pressure: 0.04-1.0MPa Hot water connection: max 60°C