Icom IC-FR6100 - Manuals - manualsarea.com

Page 2 - IMPORTANT; EXPLICIT DEFINITIONS; DO NOT; PRECAUTIONS

IMPORTANT R E A D T H I S I N S T R U C T I O N M A N UA L CAREFULLY before attempting to operate the re- peater. SAVE THIS INSTRUCTION MANUAL– This manual contains impor tant safety and operating in-structions for the IC-FR5100/IC-FR6100 vhf/uhf fm repeaters . EXPLICIT DEFINITIONS WORD DEFINITION R...

Page 3 - FORWARD; FEATURES; Up to 2 channels operation; VOICE CODING TECHNOLOGY; SUPPLIED ACCESSORIES; TABLE OF CONTENTS

ii FORWARD Thank you for purchasing this Icom repeater. The IC-FR5100/IC-FR6100 vhf/uhf fm repeaters is de- signed and built with Icom’s state of the art technol-ogy and craftsmanship. With proper care, this product should provide you with years of trouble-free opera-tion. We want to take a couple o...

Page 4 - PANEL DESCRIPTION; INTERNAL SPEAKER; KEEP; DEALER-PROGRAMMABLE KEYS; Front panel

1 PANEL DESCRIPTION 2001 NEW 1 q INTERNAL SPEAKER Monitors received signals. w VOLUME CONTROL [VOLUME] (p. 7) Adjusts the audio output level. e SELECTOR DIAL [SELECT] Rotate to adjust the squelch threshold level, select the operating channel. (Depending on the pre-programmed condition.) r POWER INDI...

Page 5 - Rear panel; Function display; I C O M

q EXTERNAL SPEAKER CONNECTOR [SP] Connect the optional SP-22. w RECEIVE ANTENNA CONNECTOR [RX] Connects a receive antenna (impedance: 50 ˘ ) and inputs receiving signals. e ACCESSORY CONNECTOR [ACC] Connects to the accessory connector. • See pgs. 3 for accessory connector information. r DC POWER REC...

Page 6 - Accessory connector

3 1 PANEL DESCRIPTION D Accessory connector q !3 !4 @5 Specification Description Pin Name Pin No. NC TXD RXD RTSCTS NC GND MOD IN DISC OUT EXT. D/A VCC EXT. A/D NC GND EXT.I/O 15 EXT.I/O 16 EXT.I/O 17 EXT.I/O 18 EXT.I/O 19 DATA IN EXT.I/O 21 AF OUT EXT.I/O 23 EXT.I/O 24 EXT.I/O 25 12345678 9 10 1112...

Page 7 - INSTALLATION AND CONNECTIONS; Unpacking; TYPE-N CONNECTOR INSTALLATION EXAMPLE

2 4 INSTALLATION AND CONNECTIONS n Unpacking After unpacking, immediately repor t any damage to the delivering carrier or dealer. Keep the shipping car-tons. For a description and a diagram of accessory equip-ment included with the repeater, see ‘SUPPLIED AC-CESSORIES’ on p. ii of this manual. n Sel...

Page 8 - Front panel connection; Rear panel connection; ACC CONNECTOR

n Front panel connection P 0 P 1 P 2 P 3 P 4 SM-25 DESKTOP MICROPHONE (optional) MICROPHONE CONNECTOR (Front panel view) HM-152 HAND MICROPHONE (optional) q i CAUTION: DO NOT short pin 1 to ground as this can damage the internal 8 V regulator. DC voltage is applied to pin 1 for microphone operation....

Page 9 - Power supply connection; Mounting the repeater; Using the supplied handle

6 2 INSTALLATION AND CONNECTIONS n Power supply connection Make sure the repeater’s power is turned OFF when connecting a DC power cable. CAUTION: Voltages greater than 16 V DC will dam- age the repeater. Check the source voltage before connecting the power cable. n Mounting the repeater D Using the...

Page 10 - Receiving and transmitting; Repeater operation; Receiving; OPERATION

n Receiving and transmitting D Repeater operation Ask your dealer for details of the repeater’s program-ming. ➥ When the power is turned ON, the [PWR] indicator lights green. (p. 1) ➥ The [TX] and [BUSY] indicators light simultane- ously while transmitting/receiving a signal. • The [TX] indicator li...

Page 11 - MAINTENANCE; Troubleshooting; Fuse replacement; DISCONNECT; Line fuse replacement

4 8 MAINTENANCE PROBLEM POSSIBLE CAUSE SOLUTION REF. n Troubleshooting The following chart is designed to help correct prob-lems which are not equipment malfunctions. If you are unable to locate the cause of a problem or solve it through the use of this chart, contact the near-est Icom Dealer or Ser...

Page 12 - OPTIONS

5 9 OPTIONS • SP-22 external speaker Compact and easy-to-install.Input impedance : 4 ˘ Max. input power : 5 W • HM-152 hand microphone • SM-25 desktop microphone • UR-FR5100/UR-FR6100 channel extension modules • UT-109R voice scrambler unit Non-rolling type (max. 32 codes). • UT-110R voice scrambler...

Page 13 - ABOUT CE; INSTALLATION NOTES

6 10 ABOUT CE INSTALLATION NOTES • Compliance of base station transmitter installa- tions with EN50385 The installation of this equipment and it’s associated antenna should be made in such a manner as to re-spect the EC recommended electromagnetic (EM) field exposure limits. (1999/519/EC) In order n...

Page 14 - • Typical installation example; • Operating Notes

11 6 ABOUT CE • Typical installation example A UHF base station transmitter is to be installed on the roof of an office. The transmit power is 25 watts, there is 20 m of RG-213 coaxial cable and the antenna is ver tically polarised dipole. The specification of the RG-213 cable gives a loss of 1.5 dB...

Page 15 - DECLARATION

12 6 ABOUT CE DECLARATION OF CONFORMITY We Icom Inc. Japan 1-1-32, Kamiminami, Hirano-kuOsaka 547-0003, Japan Kind of equipment: UHF REPEATER Type-designation: iC-fr6100/ur-fr6100 Signature Authorized representative name Place and date of issue Declare on our sole responsibility that this equipment ...