Icom IC-7200 - Manual
Icom IC-7200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PROCEDURE; Before connecting to the PC; PRECAUTIONS
- Page 3 – Before installing the USB driver; PREPARING
- Page 4 – Windows Vista; DRIVER INSTALLATION; Double click; NEVER
- Page 5 – After restarting the PC, connect the transceiver to; • Be sure to connect the USB cable correctly and not up-; Transceiver; USB cable; Turn the transceiver power ON.; • “Installing device driver software” appears as below.; After the dialogue appears as below, USB driver
- Page 6 – • Quit all other application if running.; Connect the transceiver to the PC with the USB; • “Found New Hardware” appears as below.; Windows XP; Continues to the next page
- Page 7 – • The folder constr uction: “7200UsbDr v_v100”
- Page 10 – Select “slabbus.inf” in the “Win” folder, then click; When the driver is found, the following dialogue is
- Page 11 – Select “slabw2k.inf ” in the “Win” folder, then click; • Restarting the PC is recommended.
- Page 12 – COM PORT CONFIRMATION; ” indicator is displayed on the “Device Man-
- Page 13 – DRIVER UNINSTALLATION
- Page 14 – FOR YOUR REFERENCE; COM Port setting
- Page 16 – About audio; The received audio output format; The received audio output
- Page 17 – The modulation input settings; • When the data mode is OFF (SSB or AM mode is in use); Mod; • When the data mode is ON (SSB data or AM data mode is in use); USB
- Page 18 – USB level setting; USB LVL; The modulation input audio format; Modulation input
- Page 19 – Specifications
When the transceiver is connected to a PC with the
USB cable, the following operations can be performed;
• Remote control operation (CI-V: Icom Communica-
tion Interface-V) by the PC.
• Modulation input from the PC.
• Received audio output to the PC.
Transceiver
PC
USB cable
(third party)
NOTE:
• PC software (third party) may be required. (p. 18)
• The CT-17
ci
-
v
level
converter
is required for re-
mote control operation (CI-V) when the USB cable
is not used. See p. 88 in the IC-7200 instruction
manual for details.
• The transceiver connection may not be recog-
nized by the PC because of the USB cable length.
Using the shor ter USB cable as possible is rec-
ommended.
System requirements
The PC which supports the following OS (Operating
System) is required;
• Microsoft
®
Windows Vista™
• Microsoft
®
Windows
®
XP
• Microsoft
®
Windows
®
2000
NOTE:
• The USB driver is not suppor ted for Microsoft
®
Windows
®
XP (64 bit).
• Icom is not responsible for whole performance of
the PC that supports above OS.
• In this installation guide, the above OS are de-
scribed as “Windows Vista,” “Windows XP” and
“Windows 2000.”
Item requirements
• USB cable (A-B type/third party)
A type
B type
• PC (with USB 1.1 or 2.0)
• Installed audio player
• PC software (third party)
- See p. 18 for details.
OVERVIEW
USB DRIVER
INSTALLATION GUIDE
Thank you for using the Icom Download Service.
Please read this installation guide before installing the USB driver into your PC that is connected to the IC-7200
with the USB (Universal Serial Bus) cable (third party).
Icom, Icom Inc. and the
logo are registered trademarks of Icom
Incorporated (Japan) in the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
Microsoft, Windows and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other
countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PROCEDURE Refer to the following steps for the USB driver installation. Before installing the USB driver, log in as the administrator and quit all applications when Windows is run-ning. Overview • System requirements (p. 1) • Item requirements (p. 1) Preparing • Before installing the USB driver (p. ...
3 Before installing the USB driver Icom HP gives the USB driver download service.Before installing the USB driver, download the follow-ing compressed file. • USB driver (File name: 7200UsbDrv_v100.zip) Icom is not responsible for any damage or lack of data resulting from the use of the USB driver. P...
4 Windows Vista DRIVER INSTALLATION The displayed dialogue boxes, indications or oper- ations may differ slightly from the following instruc-tions according to your system conditions or envi-ronment. q Make sure that the transceiver is not connected to the PC. w Start up Windows. • Quit all other ap...
