Icom IC-F2710 - Manuals

3 1 PANEL DESCRIPTION 1 y BELL INDICATOR Appears/blinks when the specific 5-tone/BIIS code isreceived, according to the pre-programming. u CALL CODE MEMORY INDICATOR Appears when the call code memory is selected. i SDM MEMORY INDICATOR Appears when the SDM memory is displayed. o SDM INDICATOR Appear...

4 1 PANEL DESCRIPTION ZONE KEY Push this key, then select the desired zone using [CH Up]/[CH Down]. What is “zone”? —The desired channels are assigned into a zone according to the intended use for grouping.For example, ‘Staff A’ and ‘Staff B’ are assigned into a“Business” zone, and ‘John’ and ‘Cindy...

8 2 BASIC OPERATION ■ Turning power ON q Push [ ] to turn the power ON. w If the transceiver is programmed for a start up password,input the digit codes as directed by your dealer. • 10-keypad* can be used for password input. *IC-F1810 or IC-F2810 only • The keys as below can be used for password in...

9 2 BASIC OPERATION 2 ■ Call procedure When your system employs tone signaling (excluding CTCSSand DTCS), the call procedure may be necessary prior to voicetransmission. The tone signalling employed may be a selec-tive calling system which allows you to call specific station(s)only and prevent unwan...

10 2 BASIC OPERATION D Transmitting notes • Transmit inhibit function The transceiver has several inhibit functions which restricttransmission under the following conditions: - The channel is in mute condition (‘Inaudible’ condition; “ ” does not appear.) - The channel is busy.- Un-matched (or match...

11 2 BASIC OPERATION 2 D TX code number edit If the transceiver has [TX Code CH Select] or [TX CodeEnter] assigned to it, TX code contents can be edited withinthe allowable digits. USING [TX CODE CH SELECT] KEY: q Push [TX Code CH Select] to enter the TX code channelselection mode. • Select the desi...

12 2 BASIC OPERATION D DTMF transmission If the transceiver has [DTMF Autodial] assigned to it, the auto-matic DTMF transmission function is available. Up to 8 DTMFchannels are available. TO SELECT A TX CODE: q Push [DTMF Autodial]— a DTMF channel appears. w Push [CH Up] or [CH Down], or rotate [CH ...

13 2 BASIC OPERATION 2 ■ User set mode User set mode is accessed with [User Set Mode] and allowsyou to set seldom-changed settings. In this case you can“customize” the transceiver operation to suit your preferencesand operating style. Entering the user set mode: q While pushing and holding [P1] and ...

14 3 BIIS OPERATION ■ Default setting The following functions are assigned to each programmablekey as the default. However, the assigned function can bechanged by your dealer. Ask your dealer for details. NOTE: [TX Code Enter] must be assigned to a key. [P0]; Call : Push to transmit a 5-tone/BIIS ca...

15 3 BIIS OPERATION 3 D D Group call q When a group call is received; • Beeps sound.• “ ” appears and the mute is released. • The programmed text message (e.g.“ GROUP ”) and the calling sta- tion ID (or text) is displayed when the indication mode is 2 lines. • The programmed text message (e.g.“ GROU...

16 3 BIIS OPERATION ■ Transmitting a call A total of 3 ways for code selection are available—selectingthe call code from memory, entering the call code from thekeypad and calling back from the queue channel record. D D Using call memory q While in the standby condition, push [P1] (Digital) to entert...

17 3 BIIS OPERATION 3 D D Direct code entry q While in the standby condition, push [P3] (TX Code Enter)to enter the TX code edit mode. • Code digit for editing blinks. w Push [P3] (TX Code Enter) to select the desired digit to beedited. • Digit for editing differs according to the setting. e Set the...

18 3 BIIS OPERATION ■ Receiving a message D D Receiving a status message q When a status message is received; • Beeps sound.• The calling station ID (or text) and the status message is dis- played alternately when the indication mode is 1 line, dependingon the setting. w Push [P4] (Moni(Audi)) to re...

19 3 BIIS OPERATION 3 D D Received message selection The transceiver memorizes the received message in thememory. Up to 6 messages for status and SDM, or 95 char-acter SDM’s can be memorized. The oldest message iserased when the 7th message is received. However, once thetransceiver is powered OFF, a...

20 3 BIIS OPERATION ■ Transmitting a status D D General The status message can be selected with the programmedtext, and the message text is also displayed on the functiondisplay of the called station.Up to 24 status types (1 to 24) are available, and the statusmessages 22 and 24 have designated mean...

21 3 BIIS OPERATION 3 D D General The short data message, SDM, can be sent to an individualstation or group stations. Also, 8 SDM memory channels areavailable and the messages can be edited via PC program-ming. D D Transmitting an SDM q While in the standby condition, push [P1] (Digital), thenpush [...

22 3 BIIS OPERATION D D Programming an SDM memory (IC-F1810 or IC-F2810 only) q During standby condition, push [P1] (Digital) twice, thenpush [Up] or [Down] to select the desired SDM to be edit-ed. w Push [ M ] or [#] to enter the message editing condition. • The first character blinks when [#] is p...

23 3 BIIS OPERATION 3 ■ Position data transmission When the optional cable and a GPS receiver is connected tothe transceiver, the position (longitude and latitude) data canbe transmitted automatically.Ask your dealer or system operator for connection details. The position data is transmitted when; •...

24 3 BIIS OPERATION ■ Stun function When the specified ID, set as a killer ID, is received, the stunfunction is activated. When the killer ID is received, the transceiver switches to thepassword required condition. Entering of the password via thekeypad is necessary to operate the transceiver again ...

25 4 CONNECTION AND MAINTENANCE 3 4 r t Antenna Black Red 12VBattery Solder Crimp NOTE: Use the terminals as shown below for the cable connections. R C A U T I O N ! N E V E R r e m o v e t h e f u s e - h o l d e r f r o m t h e D C power cable. q ANTENNA CONNECTOR Connects to an antenna. Contact y...

26 4 CONNECTION AND MAINTENANCE ■ Supplied Accessories • Function name stickers There are no names on the programmable function keyssince the functions can be freely assigned to these keys.Attach the supplied function name stickers as below to theappropriate keys for easy recognition of that key’s a...

27 4 CONNECTION AND MAINTENANCE 4 ■ Mounting the transceiver The universal mounting bracket supplied with your transceiv-er allows overhead mounting.• Mount the transceiver securely with the 4 supplied screws to a thick surface which can support more than 1.5 kg. ■ Optional UT-111 installation Insta...

28 4 CONNECTION AND MAINTENANCE ■ Optional UT-109 or UT-110installation q Turn the power OFF, then disconnect the DC power cable. w Unscrew the 4 cover screws, then remove the bottom cover. e Cut the pattern on the PCB at the TX mic circuit (MIC) andRX AF circuit (AF OUT), then solder CP37 as shown ...

29 4 CONNECTION AND MAINTENANCE 4 ■ Antenna A key element in the performance of any communication sys-tem is an antenna. Contact your dealer about antennas andthe best places to mount them. ■ Fuse replacement A fuse is installed in the supplied DC power cable. If a fuseblows or the transceiver stops...

30 5 DOC CE Versions of the IC-F1710/F1810/F2710/F2810 which display the “CE” symbol on theserial number seal, comply with the essentialrequirements of the European Radio andTelecommunication Terminal Directive1999/5/EC. This warning symbol indicates that this equipmentoperates in non-harmonised fre...