Icom IC-7200 - Manuals

Icom IC-7200 – Manual in PDF format online.

Manuals:

Manual

Manual Icom IC-7200

Summary

Page 2 - PROCEDURE; Before connecting to the PC; PRECAUTIONS

PROCEDURE Refer to the following steps for the USB driver installation. Before installing the USB driver, log in as the administrator and quit all applications when Windows is run-ning. Overview • System requirements (p. 1) • Item requirements (p. 1) Preparing • Before installing the USB driver (p. ...

Page 3 - Before installing the USB driver; PREPARING

3 Before installing the USB driver Icom HP gives the USB driver download service.Before installing the USB driver, download the follow-ing compressed file. • USB driver (File name: 7200UsbDrv_v100.zip) Icom is not responsible for any damage or lack of data resulting from the use of the USB driver. P...

Page 4 - Windows Vista; DRIVER INSTALLATION; Double click; NEVER

4 Windows Vista DRIVER INSTALLATION The displayed dialogue boxes, indications or oper- ations may differ slightly from the following instruc-tions according to your system conditions or envi-ronment. q Make sure that the transceiver is not connected to the PC. w Start up Windows. • Quit all other ap...

Page 5 - After restarting the PC, connect the transceiver to; • Be sure to connect the USB cable correctly and not up-; Transceiver; USB cable; Turn the transceiver power ON.; • “Installing device driver software” appears as below.; After the dialogue appears as below, USB driver

5 o After restarting the PC, connect the transceiver to the PC with the USB cable (third party) as shown below. • Be sure to connect the USB cable correctly and not up- side down. Transceiver PC USB cable (third party) To USB jack To USB port Type A Type B AC C K E Y SEND ALC REMOT E !0 Turn the tra...

Page 6 - • Quit all other application if running.; Connect the transceiver to the PC with the USB; • “Found New Hardware” appears as below.; Windows XP; Continues to the next page

6 The displayed dialogue boxes, indications or oper- ations may differ slightly from the following instruc-tions according to your system conditions or envi-ronment. q Make sure that the transceiver is not connected to the PC. w Start up Windows. • Quit all other application if running. e Connect th...

Page 7 - • The folder constr uction: “7200UsbDr v_v100”

7 Windows XP (Continued) DRIVER INSTALLATION i Select the “Win” folder, then click [OK]. • The folder constr uction: “7200UsbDr v_v100” ➞ “Driver” ➞ “Win” Click Select o Click [Next>]. Click !0 The Wizard starts searching for the driver and shows the dialogue below during search. !1 After the dri...

Page 10 - Select “slabbus.inf” in the “Win” folder, then click; When the driver is found, the following dialogue is

10 Windows 2000 (Continued) DRIVER INSTALLATION o Select “slabbus.inf” in the “Win” folder, then click [Open]. • The folder constr uction: “7200UsbDr v_v100” ➞ “Driver” ➞ “Win” Select“slabbus.inf ” Click !0 Click [OK]. Click !1 When the driver is found, the following dialogue is displayed. Click [Ne...

Page 11 - Select “slabw2k.inf ” in the “Win” folder, then click; • Restarting the PC is recommended.

11 Windows 2000 (Continued) DRIVER INSTALLATION !6 Click [Browse...]. Click !7 Select “slabw2k.inf ” in the “Win” folder, then click [Open]. • The folder constr uction: “7200UsbDr v_v100” ➞ “Driver” ➞ “Win” Click Select“slabw2k.inf ” !8 Click [OK]. Click !9 When the driver is found, the following di...

Page 12 - COM PORT CONFIRMATION; ” indicator is displayed on the “Device Man-

12 COM PORT CONFIRMATION Windows Vista q Start up Windows. w Right click “Computer,” then select “Properties.” • “Computer” is available in <Start> menu. e “System” screen appears as below. Click [Device Manager]. Click r In case “User Account Control” dialogue box ap-pears as below, click [Co...

Page 13 - DRIVER UNINSTALLATION

13 DRIVER UNINSTALLATION The displayed dialogue boxes or indications may differ slightly from the following instructions according to your system conditions, or environment. Windows Vista q Start up Windows. w Select the “Control Panel” in the Start menu. • The control panel appears as shown in the ...

Page 14 - FOR YOUR REFERENCE; COM Port setting

14 FOR YOUR REFERENCE COM Port setting To change the COM Port number setting, connect the transceiver to the PC and then turn the transceiver power ON after the driver installation is completed. Windows Vista q Start up Windows. w Right click “Computer,” then select “Properties.” • “Computer” is ava...

Page 16 - About audio; The received audio output format; The received audio output

16 FOR YOUR REFERENCE (Continued) About audio When the transceiver is connected to a PC with the USB cable (third party), the following operations can be performed; • Received audio output to the PC.• Modulation input from the PC. The set mode item ‘Modulation input (Data OFF)’ or ‘Modulation input ...

Page 17 - The modulation input settings; • When the data mode is OFF (SSB or AM mode is in use); Mod; • When the data mode is ON (SSB data or AM data mode is in use); USB

17 FOR YOUR REFERENCE About audio (Continued) The modulation input settings To input the audio signal from the USB jack of the transceiver, set the modulation input connector as “USB” in the set mode item ‘Modulation input (Data OFF)’ or ‘Modulation input (Data ON)’, or CI-V system (command). • When...

Page 18 - USB level setting; USB LVL; The modulation input audio format; Modulation input

18 FOR YOUR REFERENCE About audio (Continued) USB level setting Set the input modulation level of the USB jack in the set mode item ‘USB Level’ or CI-V system (command). <Set mode> q Push and hold M-CH/RIT SET for 1 sec. twice to enter the set mode. w Rotate [M-CH] to select “ USB LVL .” e Rot...

Page 19 - Specifications

19 FOR YOUR REFERENCE (Continued) Specifications Connector type USB B type Interface USB 2.0/1.1 Power supply Self power The PC cannot recognize the transceiver when the power is OFF. Support OS Windows VistaWindows XPWindows 2000 Serial for CI-V Compliant for CI-V spec. Asynchronous serial Construc...