Humax IR-ACE - Manuals

References All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennaeto be connected to the STB simultaneously.If you have two or more fixed antennae or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A DiSEqC ...

The HUMAX digital set-top box is a highly sophisticated product-incorporating one of the best software applications. Whenever a problem is found with this software or extra functions or enhanced applications are added, the software in the equipment must be upgraded. In order to maintain correct prod...

(STANDBY) Press to switch between Operation and Standby modes. TV/RADIO Press to switch between TV and Radio modes. P- Use to change services down. P+ Use to change services up. V - (Model IR-ACE M only) Use to volume down. V+ (Model IR-ACE M only) Use to volume up. STANDBY LED (RED) Indicates that ...

STB Connections 1. Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the STB and the otherend to a RCA/Cinch socket on your TV. If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the RF OUT on STB and the other end to a RF input socket on your TV. 2. Connect the c...

Remote Control Unit TV/RADIO STANDBY GUIDE YELLOW BLUE EXIT CURSOR V-/V+ RCL (RECALL) HELP OPT+ (OPTION) MUTE SOURCE NUMERIC BUTTONS FAV (FAVOURITE) GREEN RED OK P-/P+ MENU i (INFORMATION) FREEZE GREEN RED YELLOW BLUE GREEN RED YELLOW BLUE GB12

Function Guide The detailed information on a service and its event is automaticallydisplayed at the bottom of the screen (I-Plate) whenever a servicechanges. To obtain this information when watching a service, pressthei ( ) button. If you press the i ( ) button again while the I-Plate is displayed, ...

If you press the HELP ( ) button while the I-Plate is displayed,the detailed description of the event will be displayed on the helpwindow instead of help messages. If there is no available data forthe detailed description on the air, the help message is displayed onthe help window instead. There are...

To change the audio language in the current service, proceed as follows: 1. Press the OPT+ ( ) button and select the Soundtrack item.2. Press the button to activate the list of supported audio languages. 3. Select the desired audio language in the list using the keys.4. Select the audio mode (mono, ...

There are four service list types: All Service, Favourite Service,Network Service and Alphabetical Order Service.There is also a Configuration Service menu to change the attributes of each service in the list. In the service list, some buttons are used to switch the service listtype or select the se...

Services can be grouped in the favourite list. To add a service to agroup in the favourite list, the Configuration Service box or theService Organising menu in the main menu can be used. (Refer to the related item for a more detailed description). To select the “Favourite Service” list, press the GR...

GB19 The Main menu contains the TV Guide, Parental Control, Installationand Utility menus. (For more detailed information about menu structure, please refer to the Menu Map page at the end of theUser’s Manual.) The TV Guide is useful when all the services are being navigated,since it offers all poss...

The NOW mode displays information on the present services and following services. The information includes service name,event name and start/end time of an event. To activate the NOW mode and surf the services, proceed as follows: 1. Activate the TV Guide menu using the GUIDE ( ) button or via the M...

The WEEKLY mode displays information about all the services thatwill be transmitted over a week.The information includes service name, event name and start/endtime of the event. To activate the WEEKLY mode, proceed as follows: 1. Activate the TV Guide menu using the GUIDE ( ) button or via the Main ...

The RESERVED mode displays the services which have beenreserved.In this mode, the reservation mode can be changed. The service can also be removed from the reservation list. To change the mode or remove a service event of, proceed as follows in RESERVED mode: • Activate the TV Guide menu using the G...

The subtitle language is a language selected as a default when a service with subtitles is playing. It is also possible to changethe subtitle language via the Soundtrack menu in the Option Listmenu. To change the subtitle language, proceed as follows: 1. Activate the Language Setting menu via the Ma...

To disable or enable/set the wake-up timer, proceed as follows: 1. Activate the Time Setting menu via the Main menu.2. Select the Wakeup Time item using the button.3. To disable the wake timer, set to “Disable” using the button. 4. To enable and set the wakeup timer, set the item to “00:00” using th...

Main Menu Guide The A/V Output Setting menu supplies menus that configure thefunctions related to Audio and Video output. • Configure the Audio output of RCA (Cinch) Jack as Mono or Stereo mode. • Configure the screen aspect ratio (4:3 or 16:9) of the TV connected to STB. • Configure the video displ...

To configure the display format on the TV, proceed as follows: 1. Activate the A/V Output Setting via the Main menu.2. Select the Display Format item using the button.3. Select the desired display format depending on the TV using the button. There are two mode pairs depending on the type of TV. If t...

Main Menu Guide To configure the NTSC mode on the TV, proceed as follows: 1. Activate the A/V Output Setting via the Main menu.2. Select the NTSC Mode item using the button.3. Select the desired NTSC Mode using the button.4. Press the OK ( ) or EXIT ( ) button to confirm. The UHF Tuning menu supplie...

To set the OSD transparency, proceed as follows: 1. Activate the Other Setting menu via the Main menu.2. Select the OSD Transparency item using the button.3. Select the desired level between Opaque and Transparent modes using the button. 4. Press the OK ( ) or EXIT ( ) button to confirm. To set the ...

Main Menu Guide The Organise TV services menu supplies two organisation methods: Organise All Services and Organise Favourites.Each offers a method of organisation with its own characteristics. The services are sorted according to the service number in theOrganise All Services menu.Each service can ...

The services are sorted according to favourite groups in theOrganise Favourites menu.There are three columns: the favourite group column, the favourite list column and the service list column containing services not belonging to any favourite group.The Organise Favourites menu supplies the following...

The Organise Networks menu supplies the following functions: • Delete the network. This will delete all services belonging to the network. • Move/reorder the networks in the network list.• Sort the services according the network. In the Organise Networks menu, there are two columns: the networklist ...

Main Menu Guide The Delete Satellites menu supplies the following functions: • Delete a satellite. It will also delete all services belonging to the satellite. • Delete a transponder. It will also delete all services belonging to the transponder. • Sort the services according to the satellite and th...

3-3. Service Searching The Antenna Setting menu sets the characteristics of each antenna.32 antennae can be supported, one of which for SMATV.The Antenna Setting menu supplies the following items to characterise the antenna. Assigns an index to each antenna. Hence, the value is unique foreach antenn...

Main Menu Guide The function of the Manual Search menu is to search services inone transponder using information from a satellite transponder. (If the Network Search option is enabled, services in other transponders are searched).The following items are supplied as parameters: Specifies the antenna ...

Guide of Main Menu Automatic Search The function of the Automatic Search menu is to search servicesusing information from a satellite. The following items are supplied as parameters. Specifies the satellite in which the automatic search will be performed. Enables/disables the automatic skip option. ...

3-4. Status The function of the Status menu is to supply users with information on several STB statuses, such as: • Information on the Software version,• Information on the Hardware version,• Information on the signal level of the current locked TP,• Information on OTA availability. This information...

Main Menu Guide 3-5. Conditional Access The Conditional Access menu supplies information on IRDETO embedded CAS.There are four sub-menus in the menu: • Version Information,• Smart Card Information,• Transport Stream Information,• Monitoring ECM/EMM. The Version Information menu supplies technical in...

DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, you can use the available DiSEqC 1.2 functions.The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of thesatellites and search for the services (STAB Rotor Sat motor recommended). When ...

3. Initial Satellite Position Search This is required when you first set your receiver up to use DiSEqC 1.2, and sets the positions of allpre-programmed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region in which you are located. (Please consult ...

6. To set the East Limit: a) Select “Movement” and use the buttons to move your motor East or West until it is at the position you wish to use as your East Limit. Use the buttons to stop the motor at the correct position. b) Highlight the Store East Limit option and press the OK ( ) button to store ...

Once you have stored the positions of the satellites you want (see below left) you can search for theservices transmitted from them. Before doing this, you must move the motor to the position of thesatellite you wish to search for. To do this, you must access the Satellite Settings menu. Proceed asf...

Tuner & Channel Conditional Access Interface MPEG Transport Stream A/V Decoding Memory Input ConnectorFrequency RangeInput ImpedanceSignal LevelIFIF Band widthLNB Power &Polarisation 22 KHz ToneDiSEqC ControlDemodulationInput Symbol RateFEC Decode Transport Stream Profile LevelInput RateAspe...

A/V & Data In/Out VIDEO AUDIO R/L RS-232C RCA / CinchVideo Output (CVBS) RCA/Cinch Volume and Mute Control(Resolution : 20 bits DAC, Max. 2 Vrms)Transfer rate 115,200 bps, 9pin D-sub Type Physical Specifications Size (W x H x D) Weight (Net)Operating TempStorage TempStorage Humidity 260 x 50 x 1...