Page 2 - C US
1 This Product is Certified Ce produit est homologué Producto homologado por Este produto está registrado C US Printed: 24.04.2017 | Doc-Nr: PUB / 5138090 / 000 / 00 Printed: 24.04.2017 | Doc-Nr: PUB / 5138090 / 000 / 01
Page 5 - ORIGINAL OPERATING INSTRUCTIONS; It is essential that the operating instructions; General information
ORIGINAL OPERATING INSTRUCTIONS UH 700 hammer drill It is essential that the operating instructions are read before the power tool is operated for the first time.Always keep these operating instructions to- gether with the power tool.Ensure that the operating instructions are with the power tool whe...
Page 6 - Description
1 2 Obligation signs Wear a hard hat Wear eye protection Wear breathing protection Wear ear protection Wear protective gloves Symbols Read the operating instructions before use Return waste material for recycling. Hammer drilling Drilling without hammering, 1st gear Drilling without hammering, 2nd g...
Page 9 - Safety instructions
Power tool UH 700 Speed control Electronic, by way of the control switch Forward / reverse Switching lever with interlock to prevent switching while running Tightening torque when changing the chuck 120 Nm (89 lb/ft) Information about the power tool and its applications Protection class Protection c...
Page 11 - Before use
Disconnect the supply cord plug from the power outlet. Damaged supply cords or extension cords present a risk of electric shock. c) Dirty or dusty power tools which have been used frequently for work on conductive materials should be checked at regular intervals at a Hilti Service Center. Under unfa...
Page 12 - Operation
7 Operation DANGER Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. WARNING Do not attempt to use the tool to unscrew screws or nuts or to free sticking drill bits when the maximum torque in reverse rotation (see technical data) is in- adequate. There is...
Page 14 - Care and maintenance
4. Release the lockbutton. 7.2.5.2 Switching off after sustained operation Press the control switch again to release the lockbutton. 7.2.6 Forward / reverse 12 CAUTION Do not operate the forward / reverse switch while the motor is running. Turn the switch lever to the “forward” or “reverse” posi- ti...
Page 16 - Hilti Corporation
*273762* 273762 Hilti Corporation LI-9494 SchaanTel.: +423 / 234 21 11Fax: +423 / 234 29 65www.hilti.com Hilti = registered trademark of Hilti Corp., Schaan W 3242 | 0313 | 00-Pos. 3 | 1 Printed in China © 2013Right of technical and programme changes reserved S. E. & O . 273762 / A2 Printed: 24....