Health O Meter 2450KL - Manuals

Page 2 - PRO PLUS; TM; PORTABLE WHEELCHAIR SCALE; Thank you; Merci; TABLE OF CONTENTS

1 PRO PLUS TM PORTABLE WHEELCHAIR SCALE MODEL 2450KL Thank you for your purchase of this product. Please read this manual carefully and keep it handy for ready reference. Merci d'avoir acheté ce produit. Veuillez lire attentivement ce manuel et le garder à portée de main pour pouvoir le consulter à ...

Page 3 - CAUTION AND WARNING; SPECIFICATIONS; GENERAL; SCALE SPECIFICATIONS; Capacity and Resolution; Environmental

2 CAUTION AND WARNING To prevent injury and damage to your scale, please follow these instructions very carefully. • For accurate weighing the scale must be placed on a flat and a stable surface, locking screw is locked properly and the scale bottom is not touching the floor. • For accurate weighing...

Page 4 - SET UP; Scale - Opening and Assembly Instructions

3 SET UP Parts List: (1) Scale Assembly (1) AC Adapter (1) Display Assembly (1) Load Cell Cable (4) Plastic Feet Assemblies Tools required: Phillips head screwdriver. Remove each assembly from the carton and unwrap packing material carefully to prevent scratching the unit’s parts. Figure 1. Assembly...

Page 6 - Preparing the Scale for Use; Replacing Batteries

5 SET UP Preparing the Scale for Use 1. Remove protective plastic film from keypad and display. 2. Place batteries in the battery holder (see “Replacing Batteries”). 3. Plug the scale’s AC adapter into the power source. 4. Press the ON/OFF button to turn the scale on. The display will show “Health o...

Page 7 - OPERATION INSTRUCTIONS

6 OPERATION INSTRUCTIONS 1. Press the ON/OFF button to turn the scale on. 2. Wait until ”000 Lb 00 oz ” and “ZERO” on the left side of the display will appear. 3. Bring the wheelchair close to the scale ramps. Unscrew the width adjusting knob and adjust the scale width by moving the left ramp. NOTE:...

Page 8 - ITEM DESCRIPTION

7 OPERATION INSTRUCTIONS Figure 5. Keypad ITEM DESCRIPTION FUNCTION POWER Turns scale ON and OFF. ZERO Zeros the scale prior to weighing. HOLD/RELEASE Holds the value of the weighed object on the display until the button is pressed again to clear the value. Also used to scroll down in the menu. REWE...

Page 9 - MENU; 1 WEIGHT DISPLAY MODE

8 OPERATION INSTRUCTIONS MENU In the menu screen the user can set preferences and/or instruct the scale how to handle stored data. The menu can be navigated using the up and down keys ( cd ) or by entering the associated menu position number with the keypad. The menu has a “roll-over” way of working...

Page 10 - WEIGHT; Important; Automatic Tare; MANAGEMENT

9 OPERATION INSTRUCTIONS 02 TARE WEIGHT NOTE: Due to the scale’s sensitivity, we recommend using the REWEIGH function prior to setting the TARE weight, in order to eliminate any operator interference with the item to be tared out. There are two ways to manually enter a tare weight (such as the weigh...

Page 12 - SETTINGS

11 OPERATION INSTRUCTIONS 04 Transfer now All the values stored in memory are transferred to the PC and the scale memory is cleared of all values. If the transfer was unsuccessful, the values are kept in memory until successfully transferred or cleared. 05 Clear memory All the values stored in memor...

Page 15 - TEST

14 OPERATION INSTRUCTIONS Set the date using the up and down keys cd and enter the values on the keypad. 02 About This screen displays the software version of the scale. 06 SYSTEM TEST 01 Battery Test The scale will display the estimated amount of battery life remaining until the batteries will have...

Page 18 - MAINTENANCE; Disconnect the scale from the AC power source.

17 MAINTENANCE GENERAL This section provides instructions for maintenance, cleaning, troubleshooting and operator replaceable parts for the Pro Plus TM Portable Wheelchair Scale Model 2450KL. Maintenance operations other than those described in this section should be performed by qualified service p...

Page 19 - TROUBLESHOOTING; SYMPTOM

18 TROUBLESHOOTING Refer to the following instructions to check and correct any failure before contacting service personnel. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Scale does not turn on 1. Dead Battery 2. Faulty electrical outlet 3. Bad power supply 1. Replace batteries 2. Use a different outlet ...

Page 20 - CALIBRATION PATH; Operator Action; EXPLODED VIEW OF SCALE

19 CALIBRATION PATH The calibration is performed in Kg or Lb, according to the units of measure used upon entering into the calibration path. Operator Action Display 1. Press ON/OFF button and immediately press and hold HOLD/RELEASE button for 3-4 seconds Calibration Process 2. Press ENTER Enter loa...

Page 22 - PARTS LIST

21 PARTS LIST Key No. Part No. Description Qty. 1 1109402-0 DISPLAY ASSEMBLY 1 2 3824801-0 HEAD STAND 1 3 PHIL. PAN HEAD SCREW NC8-32*5/16” 4 4 2033702-0 MAIN BOARD TO CONNECTION CABLE 1 5 PHIL. PAN HEAD SCREW NC6-32*1/4” 5 6 2138902-0 RIGHT CONNECTION DIGITAL BOARD 1 7 COUNTERSUNK PHIL. HEAD SCREW ...

Page 23 - WARRANTY; LIMITED WARRANTY; What does the Warranty Cover?

22 WARRANTY LIMITED WARRANTY What does the Warranty Cover? Pelstar LLC scales are warranted from date of purchase against defects of materials or in workmanship for a period of one (1) year. If product fails to function properly, return the product, freight prepaid and properly packed to Pelstar. Se...