Hayter 615E - Manuals

5 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following prec...

7 6 SAFETY PRECAUTIONS Operation cont Always be sure of your footing on slopes. Walk, never run. Do not mow excessively steep slopes of more than 20 O and mow across the face of slopes, never up and down. Exercise extreme caution when changing direction. Use extreme caution when reversing or pulling...

7 Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing, contact your local Hayter dealer. 1. Motor Handbook. 4. Grassbag Fabric. 2. Grassbag Frame. 5. Warranty Reg Card. 3. Supply Cable. 6. Parts list/D of C....

8 9 Fig. 6 Fig. 7 Fig. 8 Fig. 9 OPERATING THE MOWER Electrical Connection Position the mower on the grass area to be cut. Care- fully uncoil the supply cable clear of the mower. Ensure that the mains socket is switch ‘OFF’ before connecting. Switch ‘ON’. Note: We recommend the use of a RCCB unit. re...

9 Heavy Growth Areas of heavy growth should be mown without collecting the clippings. If collection is required, first mow the area without the grassbag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the gras...

10 11 MAINTENANCE SCHEDULE / MOWER MAINTENANCE Maintenance Schedule Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, when airborne debris is present or after extensive operation cutti...

11 Cutterblade Removal cont To prevent injury it is wise to seek assistance when turning the mower on its side. Cutterblade Sharpening A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more ...

12 13 January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn wor...

13 TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION Motor fails to start 1. Mains supply socket dead 2. RCCB tripped 3. Plug pulled out of mains socket 4. Fuse failure 5. Supply cable damaged 6.Cutterblade obstructed 1. Test socket by plugging in another appliance 2. Remove mower plug and check RCC...

16 Date of Sale:- Your Local Dealer:- CODE SERIAL NO. Motor Type:- 240V DEALER ST AMP 1st Y ear (12 months ) We certify t hat this service h as been carried out by an Authorised Hayter Service Dealer Date: 1st Y ear (12 months ) Owner ’s Name : Serial Number: Date: 2nd Y ear (24 months ) We certify ...