Hayter 101 88 90-26 - Manual

Page 2 - LIST OF CONTENTS; List of Contents; Safety instructions

English – 1 LIST OF CONTENTS List of Contents Safety instructions User safety .......................................................................... 2Tool safety ........................................................................... 2Working safety .............................................

Page 3 - SAFETY INSTRUCTIONS; User safety; Care and storage safety; Tool safety

2 – English SAFETY INSTRUCTIONS User safety • Read carefully through this Workshop Manual to understand all the repair directions. • Check that there are no stones, twigs, tools or other objects, which can damage the blades, on the lawn to be used as atest surface. • Those not familiar with how the ...

Page 4 - Technical data; TECHNICAL DATA

English – 3 Technical data Batteries NiCd Cutting system Cutting disc with three flexible blades Wheels Front wheels with stainless steel bearings Height control Variable, 30 - 60 mm Weight 6.5 kg Length/Width/Height 105cm/63cm/22cm Working capacity 1200 m 2 +- 20% 17 16 18 13 12 10 8 9 1 2 3 4 5 7 ...

Page 5 - Solar panels; TROUBLE SHOOTING; General trouble shooting tips

4 – English Solar panels A number of solar panels connected together transform daylightinto electrical energy. This electrical energy drives the lawnmower and charges the batteries. When the lawn mower is in the sun its rays are sufficient todrive the lawn mower and charge the batteries. The micropr...

Page 6 - Motor and cutting disc

English – 5 The panel can still work despite one of the segments beingdamaged, but then gives a lower capacity. This can mean thatthe machine frequently stands still and charges, even on verysunny days. Or the lawn mower can stand still and beep onceevery 10 seconds, which is the night mode signal, ...

Page 7 - Drive motors; Sensors; Moisture sensor

6 – English The sensor is sensitive to moisture and dirt. If, for example,grass sticks between the sensor's pins this will cause signalleakage and the lawn mower will possibly signal that it cannotsense a signal from the loop cable (3 beeps/second). Theunused (smaller) pin can be cut off and insulat...

Page 8 - Batteries

English – 7 Microswitches (Collision detectors) The front panel’s rear edge is suspended in two, spring-loadedaluminium levers.These levers in turn activate two microswitches which areintegrated in the “housings“ (see the diagram below) thatconnect the front panel with the box. TROUBLE SHOOTING The ...

Page 9 - Keyboard

8 – English TROUBLE SHOOTING Keyboard The keyboard is used to deactivate the theft alarm and to enterthe security code and to change limit values for a number of thelawn mower’s parameters. If the keyboard ceases to beep when the keys are pressed thiscan be due to, in addition to a discharged batter...

Page 10 - Circuitboard with CPU

English – 9 TROUBLE SHOOTING Circuitboard with CPU The circuitboard together with the CPU (microprocessor) arethe lawn mower’s “brain“ and handle all functions, commandsand path selections the lawn mower decides on, based on theinput data provided by the keyboard, sensors, solar panels,microswitches...

Page 12 - Trouble shooting chart; Action

English – 11 TROUBLE SHOOTING Trouble shooting chart Action Check that the cable is not broken (byusing the operating test on the generator). Check the sensor, wipe off any grass ormoisture on the cable connections. Ensurethe cover is fitted. If the problem frequentlyrecurs cut off the unused pin an...

Page 14 - CIRCUIT DIAGRAM

English – 13 CIRCUIT DIAGRAM Magnetic switch Cutting motor Red Black Black Black Front body Rear body Red Red Eng-SOL VERK 98-01-15, 10.07 13