Hayter 433G - Manual

4 5 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following pr...

6 7 SAFETY PRECAUTIONS Operation cont Always replace worn or faulty parts with genuine Hayter parts. This machine contains spring loaded assemblies which could cause a hazard when disassembled and reassembled. Maintenance should only be carried out by a Hayter authorised dealer. Always ensure the bl...

6 7 Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 3. Parts list/D of C. 2. Grassbag. 4. Warranty Reg Card. To prevent accidents cut off the long r...

8 9 Fig. 7 Fig. 8 Fig. 9 OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. (Refer fig.7) Starting Stand behind the mower and hold ...

10 11 Non Grassed Areas When moving the mower across non-grassed areas, stop the engine and set the mower to the maximum height of cut to protect the cutting mechanism. (Refer fig.17) Maintenance Schedule Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be ...

10 11 MOWER MAINTENANCE Carburettor Adjustments Should only be made by an authorised Briggs & Stratton dealer. Under no circumstances should the engine be adjusted to run at a speed in excess of that shown on the Declaration of Conformity. Oil Service Check the oil level daily before starting th...

12 13 Securing Nuts & Bolts Regularly check that all securing nuts and bolts are tight. Replace missing or damaged items immediately. Clutch Cable Adjustment (Code 434 & 435 only) Check the clutch cable operation every 25 operating hours and adjust if necessary. The clutch cable is adjusted ...

12 13 Cutterblade Sharpening A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more frequently if conditions require. Remove the cutterblade from the mower and clean using a brush and water....

14 15 January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn wor...

14 15 TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION Engine will not turn over 1. Engine stop lever released 2. Incorrect oil level 3. Obstruction under deck 1. Operate engine stop lever 2. Check oil level 3. Remove obstruction Engine smokes 1. Excess oil2. Air cleaner cartridge oil soaked or blo...

18 Date of Sale:- Your Local Dealer:- CODE SERIAL NO. Engine Type:- Engine:- DEALER ST AMP 1st Y ear (12 months ) We certify t hat this service h as been carried out by an Authorised Hayter Service Dealer Date: 1st Y ear (12 months ) Owner ’s Name : Serial Number: Date: 2nd Y ear (24 months ) We cer...