Grizzly Industrial T23096 - Manuals

Page 3 - table of contents

table of contents safety ............................................................................................................................2 safety instructions for pneumatic tools .....................................................................2Additional safety instructions for pneu...

Page 4 - safety; safety instructions for pneumatic tools; For Your Own Safety Read Instruction Manual; NOTICE

Model t23096 industrial 1 ⁄ 4 " die grinder -2 - safety safety instructions for pneumatic tools Keep all safety devices in place and in working order. remove adJusting Keys and Wrenches. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation. Keep W...

Page 6 - section 1: introduction; foreword

Model t23096 industrial 1 ⁄ 4 " die grinder -4 - section 1: introduction We are proud to offer this manual with your new t23096! We've made every effort to be exact with the instructions, specifica-tions, drawings, and photographs of the t23096 we used when writing this manual. however, sometime...

Page 7 - identification

Model t23096 industrial 1 ⁄ 4 " die grinder -5 - Trigger Lock Throttle ValveAdjustmentScrew ⁄ 4 " Quick Disconnect Fitting Removed Spindle Collet Nut Collet Insert Filter Screen Trigger ThrottleValve 1 Exhaust Port identification this tool presents serious injury hazards to untrained users. ...

Page 8 - unpacking

Model t23096 industrial 1 ⁄ 4 " die grinder -6 - your tool was carefully packaged for safe transportation. remove the packaging materials from around your tool and inspect it. if you discover the tool is damaged, please immediately call Customer Service at (570) 546-9663 for advice. save the con...

Page 9 - section 3: operations; operation overview

Model t23096 industrial 1 ⁄ 4 " die grinder -7 - section 3: operations operation overview to complete a typical cutting or grinding operation: 1. secure the workpiece in a vise. 2. remove all combustibles, flammable materials, and ignition hazards from the area. 3. Verify the cutter or grinding ...

Page 10 - section 4: accessories

Model t23096 industrial 1 ⁄ 4 " die grinder -8 - section 4: accessories figure 4. 50-pc. stone set. g8210—50-pc. stone setA great selection of high-quality grinding stones in the most common shapes for detailed die-grinding work. stones are equipped with 1 ⁄ 4 " mounting shanks. h7573—2"...

Page 12 - section 5: maintenance; daily maintenance; lubrication

Model t23096 industrial 1 ⁄ 4 " die grinder -10 - section 5: maintenance daily maintenance before and after each use:• Check for leaking or cracked air fittings; bubbled, cut, or worn hoses; and replace as required. • place a few drops of air tool oil (not motor oil) in the air inlet fitting. • ...

Page 13 - troubleshooting; symptom

Model t23096 industrial 1 ⁄ 4 " die grinder -11 - troubleshooting symptom possible cause solution tool runs at normal speed but bogs down when grinding, or tool runs slowly with little air exiting the exhaust. 1. grinder is being overloaded. 2. tool adjustment at fault. 3. trigger or lock is ben...

Page 16 - Warranty

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Griz...