Grizzly Industrial T10687 - Manuals

Grizzly Industrial T10687 – Manual in PDF format online.

Manuals:

Manual

Manual Grizzly Industrial T10687

Summary

Page 3 - Table of Contents

INTRODUCTION ............................................................................................................................... 2 Manual Accuracy ........................................................................................................................ 2Contact Info .........

Page 4 - INTRODUCTION; Manual Accuracy

INTRODUCTION Manual Accuracy Contact Info We stand behind our machines. If you have any questions or need help, use the information below to contact us. Before contacting, please get the serial number and manufacture date of your machine. This will help us help you faster. Grizzly Technical Support ...

Page 5 - Glossary Of Terms

Model T10687 (Mfg. Since 10/12) -3- The following is a list of common definitions, terms and phrases used throughout this manual as they relate to this track saw and woodworking in general. Become familiar with these terms for assembling, adjusting or operating this machine. Your safety is VERY impo...

Page 6 - Features and Controls

-4- Model T10687 (Mfg. Since 10/12) A. Primary Handle: Used to steady the saw when plunging and to advance its position on the workpiece/rail track. B. Secondary Handle: Used to lower saw blade into workpiece once the plunge release and ON/OFF trigger have been pulled. C. Depth Stop & Lock Knob:...

Page 8 - Track saw

-6- Model T10687 (Mfg. Since 10/12) Page 1 of 2 Model T10687 model T10687 Track saw Product Dimensions: Weight ............................................................................................................................................................................. 11 lbs.Width (s...

Page 10 - For Your Own Safety, Read Instruction; NOTICE; Safety Instructions for Power Tools

-8- Model T10687 (Mfg. Since 10/12) SECTION 1: SAFETY DISCONNECT POWER FIRST. Always disconnect tool from power supply BEFORE making adjust- ments, changing tooling, or servicing machine. This prevents an injury risk from unintended startup or contact with live electrical components. EYE PROTECTION....

Page 12 - Additional Safety for Circular Saws

-10- Model T10687 (Mfg. Since 10/12) Additional Safety for Circular Saws BLADE MAINTENANCE. Always ensure that the saw blades are sharp, undamaged, and tightly attached before each use. Only use blades that meet the specifications listed on the data sheet. RECOMMENDED ACCESSORIES. Only use appropria...

Page 14 - SECTION 2: POWER SUPPLY; Availability

-12- Model T10687 (Mfg. Since 10/12) SECTION 2: POWER SUPPLY Availability Before installing the machine, consider the avail-ability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed. To minimize...

Page 16 - Optional

-14- Model T10687 (Mfg. Since 10/12) SECTION 3: SETUP Unpacking SUFFOCATION HAZARD! Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately. Included Inventory T10687 Included Inventory (Figures 4) A. Track Saw ..................................

Page 17 - Dust Collection

Model T10687 (Mfg. Since 10/12) -15- Dust Collection Recommended CFM at Dust Port: 100 CFMDo not confuse this CFM recommendation with the rating of the dust collector. To determine the CFM at the dust port, you must consider these variables: (1) CFM rating of the dust collector, (2) hose type and le...

Page 18 - SECTION 4: OPERATIONS; Changing Blades; Blade Selection

-16- Model T10687 (Mfg. Since 10/12) SECTION 4: OPERATIONS The T10687 Track Saw is designed to be used with wood and wood-based material. This tool should not be used to cut ferrous metals (steel, cast iron, etc.), glass, aluminum, plastics, ceram-ics, tile, drywall, cementious backer board, carpet,...

Page 22 - Making Plunge Cuts

-20- Model T10687 (Mfg. Since 10/12) 3. Hold the saw firmly with one hand on each handle, as shown in Figure 18. Plunge cuts are made by positioning the saw on the workpiece so that the blade begins cutting as soon as it is lowered. Plunge cuts work well for removing an area within the workpiece wit...

Page 24 - Using Rail Track; Adding Rail Tracks

-22- Model T10687 (Mfg. Since 10/12) 3. Place the saw onto the rail track so the blade engages the workpiece to the right of the rail. 4. Adjust the rail adjustment knobs to position the saw along the rail (see Figure 22). When the rail edge and saw cutting path both line up straight, the saw is pro...

Page 25 - Using Adjustable

Model T10687 (Mfg. Since 10/12) -23- The stabilizer (see Figure 25) clips the saw onto the rail track to help prevent the saw from acci-dentally derailing. The stabilizer is attached to the base plate. Using Adjustable Stop Using the Stabilizer The adjustable stop (see Figure 24) attaches to the rai...

Page 26 - SECTION 5: MAINTENANCE; Electrical; Cleaning

-24- Model T10687 (Mfg. Since 10/12) SECTION 5: MAINTENANCE Electrical To reduce risk of shock or accidental startup, always disconnect machine from power before adjustments, maintenance, or service. The electrical components of this saw are not user-serviceable. This product is double-insulated, wh...

Page 27 - Troubleshooting

Model T10687 (Mfg. Since 10/12) -25- Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support at (570) 546-9663. Note: Please gather the serial number and manufactu...

Page 28 - Set Screw; Replacing Brushes

-26- Model T10687 (Mfg. Since 10/12) Tools Needed• #2 Phillips Screwdriver • Small Flat-End Screwdriver • Needle-Nose Pliers To replace the carbon brushes: 1. DISCONNECT SAW FROM POWER! 2. Place saw on its side, with the motor cover facing up. 3. Using a Phillips screwdriver, loosen the four motor c...

Page 31 - Track Saw Parts List

Model T10687 (Mfg. Since 10/12) -29- REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PT10687001 POWER CORD 18G 2W 72" 1-15 45 P6002ZZ BALL BEARING 6002ZZ 2 PAW05M HEX WRENCH 5MM 46 PR29M INT RETAINING RING 32MM 3 PT10687003 CARBON BRUSH SPRING 47 PCAP50M CAP SCREW M5-.8 X 10 4 PT10687004 CARBON ...

Page 32 - Parts Breakdown

-30- Model T10687 (Mfg. Since 10/12) 101 102 102 103 104 104 105 106 107 108 109 109 113 114 T24872 Rail Track & T25094 Accessory Pack Parts Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PT10687101 BOTTOM RUBBER STRIP 107 PT10687107 ADJUSTABLE STOP BODY 102 PT10687102 BOTTOM FOAM S...

Page 33 - WARRANTY CARD

C U T A LO N G D O T T E D LI N E Name _____________________________________________________________________________ Street _____________________________________________________________________________City _______________________ State _________________________ Zip _____________________Phone # _____...

Page 36 - Buy Direct and Save with Grizzly; ORDER

Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! ~Since 1983~ ORDER 24 HOURS A DAY! 1-800-523-4777 Visit Our Website Today For Current Specials!