Grizzly Industrial H8226 - Manuals

Page 3 - SAFETY; NOTICE

-1 - Model H8226 5 Gallon Automatic Mixing Paint Tank Safety Instructions for Pneumatic Tools 1. READ THIS MANUAL. This tool may cause personal injury if used incor-rectly. This manual contains proper safety and operating instructions that must be followed to reduce this risk. 2. WEAR EYE PROTECTION...

Page 5 - Additional Safety Instructions for Paint Tanks

-3 - Model H8226 5 Gallon Automatic Mixing Paint Tank No list of safety guidelines is complete, because every work environment is different. Always consider safety first and use common sense. Failure to use this tool with caution and respect could result in serious personal injury. 1. READ THIS MANU...

Page 6 - INTRODUCTION; Specifications

Model H8226 5 Gallon Automatic Mixing Paint Tank -4 - INTRODUCTION Specifications Foreword The specific ations, details, and photographs in this manual represent the Model H8226 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be mad...

Page 7 - Inventory; SETUP; Unpacking

-5 - Model H8226 5 Gallon Automatic Mixing Paint Tank Inventory SETUP Figure 1. Model H8226 Inventory. F E B C D G Your paint tank was carefully packaged for safe shipping. If you discover any damage after you have signed for delivery, immedi- ately call Customer Service at (570) 546-9663 for advice...

Page 8 - Tank Assembly

Model H8226 5 Gallon Automatic Mixing Paint Tank -6 - Tank Assembly To assemble the paint tank: 1. Attach the casters to the bottom of the paint tank. 2. Connect a 1 / 4 NPT air supply hose (not included), to the inlet fitting on the regu-lator ( Figure 2 ). 3. Connect the machined compression hose ...

Page 9 - Tank Regulator

-7 - Model H8226 5 Gallon Automatic Mixing Paint Tank The pressure regulator on the paint tank controls the amount of pressure applied to the paint in the paint tank. It also controls the pressure of paint delivered to the spray gun. The following are operating guidelines for internal and external s...

Page 10 - OPERATIONS; Tank Setup

Model H8226 5 Gallon Automatic Mixing Paint Tank -8 - OPERATIONS Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or follow...

Page 11 - CLEANING AND LUBRICATION

-9 - Model H8226 5 Gallon Automatic Mixing Paint Tank CLEANING AND LUBRICATION 3. Turn the tank regulator knob coun- terclockwise until you no longer feel spring tension. 4. Loosen the butterfly nuts on the tank lid ( Figure 4 ), tip the clamps back, and tilt the tank lid to one side. 5. Loosen the ...

Page 12 - Troubleshooting

Model H8226 5 Gallon Automatic Mixing Paint Tank -10 - Troubleshooting Symptom Possible Cause Solution Air escaping from port on regulating cap. 1. Broken or damaged dia- phragm in tank regulator. 1. Replace tank regulator. Pressure dropping slowly on regulator. 1. Dirty or worn valve seat in regula...