Grizzly Industrial H8116 - Manuals

Page 3 - Table of Contents

Model H8116 Spray Gun -3 - Table of Contents SECTION 1: SAFETY .......................................................................................................4 Additional Safety Instructions for Spray Guns ............................................................6 SECTION 2: INTRODUCTION ...

Page 4 - NOTICE; Safety Instructions for Pneumatic Tools

Model H8116 Spray Gun -4 - SECTION 1: SAFETY Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or s...

Page 6 - Additional Safety Instructions for Spray Guns

Model H8116 Spray Gun -6 - 1. READ THIS MANUAL. This manual contains proper operating instruc-tions for this spray gun. 2. RE AD MATERIAL L ABELS and MATERIAL SAFETY DATA SHEETS (MSDS) . Read and know all the instructions on the packag-ing label and the MSDS specific to the material you intend to ap...

Page 7 - SECTION 2: INTRODUCTION; Foreword

Model H8116 Spray Gun -7 - SECTION 2: INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Email: [email protected] Most importantly, we stand behind ou...

Page 8 - Unpacking; Inventory

Model H8116 Spray Gun -8 - SECTION 3: SET UP Figure 1. Model H8116 inventory. B C D Unpacking Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advic...

Page 9 - Controls

Model H8116 Spray Gun -9 - 1. Pattern Control: Adjusts the spray pattern width. 2. Air Flow Control: Controls the fluid pressure inside the spray gun and the volume of material that travels through the fluid tip. 3. Trigger: Two stage trigger. Stage one releases compressed air for blowing off the wo...

Page 10 - SECTION 4: OPERATIONS; Spraying

Model H8116 Spray Gun -10 - SECTION 4: OPERATIONS Spraying The Model H8116 spray gun is designed to spray paints and lacquers that have low viscosity or have been thinned down. It is ideal for touch-up projects. To use your spray gun: 1. Read and follow the material manufac-turer's instructions for ...

Page 12 - SECTION 5: ACCESSORIES

Model H8116 Spray Gun -12 - Figure 6. G6261 Campbell Hausfeld™ water filter. G6261— Campbell Hausfeld™ Water Filter Remove damaging water vapor before it reaches your pneumatic tools. This highly effective, five micron filter features a see- through bowl and easy in-line connections. 150 PSI maximum...

Page 13 - SECTION 6: MAINTENANCE; Cleaning

Model H8116 Spray Gun -13 - SECTION 6: MAINTENANCE Cleaning Proper cleaning is the best way to ensure trouble free performance from your spray gun. If your gun is not thoroughly cleaned between uses, damage and poor spraying will result. Problems caused by improper cleaning are not covered by the wa...

Page 16 - Notes

Page 18 - WARRANTY AND RETURNS

Model H8116 Spray Gun -18 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack ...

Page 19 - WARRANTY CARD

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

Page 20 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here