Grizzly Industrial H7946 - Manuals

Page 2 - SAFETY; NOTICE

Safety Instructions For Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES . Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN . Cluttered areas and benches inv...

Page 3 - Safety Instructions For Pneumatic Tools

H7945/H7946/H7995 26° Angle Nailer -1 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck-ties, rings, bracelets, or other jew-elry which may g...

Page 4 - Additional Safety Instructions for Nailers

H7945/H7946/H7995 26° Angle Nailer -2 - 1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer to pressur-ized oxygen or other combustibl...

Page 6 - INTRODUCTION; Foreword

H7945/H7946/H7995 26° Angle Nailer -4 - INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Email: [email protected] Most importantly, we stand...

Page 7 - SETUP; Unpacking; Inventory

H7945/H7946/H7995 26° Angle Nailer -5 - SETUP Figure 1. Model H7945 /H7946/H7995 inventory. Unpacking Your Model H7945/H7946/H7995 left our warehouse in a carefully packed box. If you discover the nailer is damaged after you have signed for delivery, please imme- diately call Customer Service at (57...

Page 10 - OPERATIONS; Loading

H7945/H7946/H7995 26° Angle Nailer -8 - OPERATIONS Loading Use nails meeting the specifications listed for your nailer on Page 4 of this manual. To load nails in your nailer: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! Figure 4. Lifting the pusher into the lock notch. 3. Lift the pusher upward toward ...

Page 12 - Using the Nailer

H7945/H7946/H7995 26° Angle Nailer -10 - Using the Nailer Before you operate your nailer, place five to six drops of air tool oil into the quick connect fitting where the nailer connects to the air supply. To operate your nailer: 1. Connect the air supply to the quick connect fitting on your nailer....

Page 13 - Clearing Jammed; Adjusting Depth

H7945/H7946/H7995 26° Angle Nailer -11 - A jammed nail must be cleared before the nailer is used again. To clear a jammed nail from the dis-charge area: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! 2. Remove all nails from the magazine. (See Unloading Nails on Page 9 .) 3. Use a pair of pliers to grab ...

Page 14 - Replacing

H7945/H7946/H7995 26° Angle Nailer -12 - Replacing Pistons /O-Rings If you need to replace piston parts in your nailer, you can purchase a piston repair kit from Grizzly: call 1-800-523-4777. The Piston Repair Kit part number for Model H7945 is PH7945090; the Piston Repair Kit part number for Model ...

Page 15 - CLEANING & LUBRICATING; Cleaning; Lubricating

H7945/H7946/H7995 26° Angle Nailer -13 - CLEANING & LUBRICATING Cleaning Use an automotive grade solvent such as Sprayway C-60 ® (G2544 in the Grizzly catalog) to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, or sand...

Page 22 - TROUBLESHOOTING; Symptom

H7945/H7946/H7995 26° Angle Nailer -20 - TROUBLESHOOTING Symptom Possible Cause Solution Air leaking at trig-ger valve area. 1. O-rings in trigger valve hous- ing are damaged. 1. O-rings must be replaced. Air leaking between housing and hose. 1. Loose screws in housing.2. Damaged O-ring.3. Loose air...

Page 23 - WARRANTY AND RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Griz...

Page 25 - WARRANTY CARD

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

Page 26 - Send a Grizzly Catalog to a friend:; Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here