Grizzly Industrial H7859 - Manuals

Page 3 - NOTICE; Safety Instructions for Hand Drills

-C - For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety mes...

Page 5 - Safety Instructions for Drills

-E - Safety Instructions for Drills 1. READ THROUGH THE ENTIRE MANUAL BEFORE STARTING DRILL. Drill presents serious injury hazards to untrained users. 2. ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING DRILL. Everyday eye- glasses are NOT safety glasses. 3. MAKE WORKSHOP CHILD PROOF. Use padl...

Page 6 - SECTION 2: INTRODUCTION; Foreword

Model H7859 Right Angle Drill -F - SECTION 2: INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Most importantly, we stand behind our tools. If you hav...

Page 7 - Unpacking; Parts; Inventory

-G - Your drill left our warehouse carefully packed. If you discover the drill is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materi-als for possible inspection by the carrier or its agent. Oth...

Page 8 - SECTION 4: OPERATIONS; Changing Bits

Model H7859 Right Angle Drill -H - SECTION 4: OPERATIONS Changing Bits 1. DISCONNECT THE DRILL FROM POWER! 2. Insert the chuck key into one of the holes located on the side of the chuck. 3. Turn the chuck key counter-clock- wise. This will cause the three chuck jaws to open. When the chuck jaws are ...

Page 9 - Basic Maintenance; SECTION 5: MAINTENANCE; Brush Replacement

-I - Basic Maintenance Continuous use of a worn or damaged bit will overload the motor, so often inspect and sharpen drill bits as required. Regularly clean your drill and make sure that no dust or grime builds up in the motor ventilation holes. If these holes become blocked, the motor will wear dow...

Page 10 - WARRANTY AND RETURNS

Model H7859 Right Angle Drill -J - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations o...

Page 11 - WARRANTY CARD

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

Page 12 - Send a Grizzly Catalog to a friend:; Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here