Grizzly Industrial H7761 - Manuals

Grizzly Industrial H7761 – Manual in PDF format online.

Manuals:

Manual

Manual Grizzly Industrial H7761

Summary

Page 3 - Table of Contents

H7761 2" x 27" Belt & 6" Disc Combo Sander -1- Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword ......................................................................

Page 4 - Foreword; INTRODUCTION; Contact Info

-2- H7761 2" x 27" Belt & 6" Disc Combo Sander If you have any comments regarding this manual, please write to us at the address below: Grizzly Industrial, Inc. C / O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 We stand behind our machines. If you have any...

Page 5 - MODEL H7761 COMBO BELT/DISC SANDER; MACHINE DATA

H7761 2" x 27" Belt & 6" Disc Combo Sander -3- Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MODEL H7761 COMBO BELT/DISC SANDER Design Type ......................................................................... Bench Model Overall Dimen...

Page 6 - Identification

-4- H7761 2" x 27" Belt & 6" Disc Combo Sander A. Sanding Belt B. Back Stop C. 1 1 / 2 " Dust Ports (disc port not shown) D. Miter Gauge E. Disc Sanding Table F. Sanding Disc G. Motor H. Tracking Knob I. Belt Tensioning Knob J. Side Guard Knob K. Back Stop Angle Knob L. Table Ang...

Page 7 - For Your Own Safety, Read Instruction; NOTICE; Safety Instructions for Machinery

H7761 2" x 27" Belt & 6" Disc Combo Sander -5- 4. ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage. 5. WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. ...

Page 9 - Additional Safety Instructions for Sanders

H7761 2" x 27" Belt & 6" Disc Combo Sander -7- Additional Safety Instructions for Sanders 8. FEEDING WORKPIECE. Firmly grasp the workpiece in both hands and ease it into the machine using light pressure. DO NOT jam the workpiece into the machine during operation. Feed the workpiece a...

Page 10 - SECTION 2: CIRCUIT REQUIREMENTS

-8- H7761 2" x 27" Belt & 6" Disc Combo Sander SECTION 2: CIRCUIT REQUIREMENTS This machine must have a ground prong in the plug to help ensure that it is grounded. DO NOT remove ground prong from plug to fit into a two-pronged outlet! If the plug will not fit the outlet, have the pr...

Page 11 - Unpacking

H7761 2" x 27" Belt & 6" Disc Combo Sander -9- Wear safety glasses dur- ing the entire set up pro- cess! This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machin...

Page 12 - Mounting; Items Needed for

-10- H7761 2" x 27" Belt & 6" Disc Combo Sander Mounting The Model H7761 weighs 22 lbs. Make sure the workbench on which you plan to mount the sander is sturdy enough to hold the weight of the machine and any downward pressure that may be applied during operation. The workbench shoul...

Page 13 - Hardware Recognition Chart

H7761 2" x 27" Belt & 6" Disc Combo Sander -11- Hardware Recognition Chart

Page 16 - Adjusting Miter Gauge; Aligning Table

-14- H7761 2" x 27" Belt & 6" Disc Combo Sander Adjusting Miter Gauge Figure 7. Squaring the miter gauge. The miter gauge needs to be adjusted perpendic-ular to the face of the wheel when it is mounted in the table slot. To adjust miter gauge: 1. DISCONNECT THE MACHINE FROM THE POWER...

Page 17 - Installing Sanding

H7761 2" x 27" Belt & 6" Disc Combo Sander -15- Adjusting Sanding Belt Tracking Before starting the sander, perform the preceding assembly and adjustment instructions, and read through the rest of the manual and to become familiar with the various functions and safety issues associat...

Page 18 - Installing Back Stop

-16- H7761 2" x 27" Belt & 6" Disc Combo Sander Installing Dust Collection Hose The dust ports are located behind both the sand-ing belt and the sanding disc. Each opening is 1 1 ⁄ 2 " in diameter and can be connected to a utility vacuum or a dust collector. To connect a dust por...

Page 19 - General; SECTION 4: OPERATIONS; Disc Sanding

H7761 2" x 27" Belt & 6" Disc Combo Sander -17- This section covers basic sanding operations. Please read the remaining portion of the manual before attempting any type of operation. Your safety is important! Please follow the warnings below during this entire section: Operating this...

Page 20 - Miter Sanding; Angle Sanding

-18- H7761 2" x 27" Belt & 6" Disc Combo Sander Miter Sanding The most efficient way to get a perfect miter is to cut the workpiece slightly long and sand it to the desired dimension. Miter sanding can be done easily with the miter gauge. To perform miter sanding operations: 1. Loose...

Page 21 - Belt Sanding

H7761 2" x 27" Belt & 6" Disc Combo Sander -19- Figure 14. Belt sanding. Belt sanding allows you to sand the flat surface of a workpiece. To perform belt sanding operations: 1. Turn the power ON and allow the sander to reach full speed. 2. Place the workpiece against the surface of t...

Page 22 - SECTION 5: ACCESSORIES

-20- H7761 2" x 27" Belt & 6" Disc Combo Sander SECTION 5: ACCESSORIES G7984—Face Shield H1298—Dust Sealed Safety Glasses H1300—UV Blocking, Clear Safety Glasses H2347—Uvex ® Spitfire Safety Glasses H0736—Shop Fox ® Safety Glasses Safety Glasses are essential to every shop. If you al...

Page 23 - Schedule; SECTION 6: MAINTENANCE

H7761 2" x 27" Belt & 6" Disc Combo Sander -21- Serious personal injury could occur if you con- nect your machine to the power source dur- ing the maintenance pro- cess. DO NOT connect the machine to the power source while performing any maintenance on this machine. Your safety is im...

Page 25 - Troubleshooting

H7761 2" x 27" Belt & 6" Disc Combo Sander -23- SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Motor will not start. 1. Low voltage.2. Open circuit in motor or loose connections. 1. Check power line voltage and correct if necessary.2. Inspect all connections on motor for loose or open conn...

Page 26 - Parts Breakdown

-24- H7761 2" x 27" Belt & 6" Disc Combo Sander �� ...

Page 27 - Parts List

H7761 2" x 27" Belt & 6" Disc Combo Sander -25- REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH7761001 WORK TABLE 39 PH7761039 SWITCH PLATE 2 PH7761002 DISC PAPER 80 GRIT 40 PH7761040 SWITCH 3 PSB01M CAP SCREW M6-1 X 16 41 PH7761041 TOOL STORAGE BOTTOM COVER 4 PTLW13M INTERNAL TOO...

Page 28 - WARRANTY AND RETURNS

-26- H7761 2" x 27" Belt & 6" Disc Combo Sander Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accide...