Grizzly Industrial H7668 - Manuals

Grizzly Industrial H7668 – Manual in PDF format online.

Manuals:

Manual

Manual Grizzly Industrial H7668

Summary

Page 3 - Table of Contents

Model H7668 Spray Gun w/Pressure Cup -3 - Table of Contents SECTION 1: SAFETY .......................................................................................................4 Safety Instructions for Pneumatic Tools .....................................................................5Additio...

Page 4 - NOTICE; Safety Instructions For Pneumatic Tools

Model H7668 Spray Gun w/Pressure Cup -4 - SECTION 1: SAFETY Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices. Indicates a potentially hazardous situation which, if not avoided, COULD resul...

Page 5 - Safety Instructions for Pneumatic Tools

Model H7668 Spray Gun w/Pressure Cup -5 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck-ties, rings, bracelets, or other jew-elry which may...

Page 6 - Additional Safety Instructions for Spray Guns

Model H7668 Spray Gun w/Pressure Cup -6 - 1. READ THIS MANUAL. This manual contains proper operating instruc-tions for this spray gun. 2. RE AD MATERIAL L ABELS and MATERIAL SAFETY DATA SHEETS (MSDS) . Read and know all the instructions on the packag-ing label and the MSDS before opening the package...

Page 7 - SECTION 2: INTRODUCTION; Foreword

Model H7668 Spray Gun w/Pressure Cup -7 - SECTION 2: INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Most importantly, we stand behind our tools. If ...

Page 8 - Unpacking; Inventory

Model H7668 Spray Gun w/Pressure Cup -8 - SECTION 3: SET UP Figure 1. Model H7668 inventory. B C D Unpacking Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546...

Page 9 - Assembly

Model H7668 Spray Gun w/Pressure Cup -9 - Assembly 2. Attach the 3 ⁄ 8 " fluid hose to the 3 ⁄ 8 " outlet on the cap (see Figure 3 ). Note: Make sure all hose connections are tight enough to prevent air leaks. Figure 5. Air hose installed. Figure 6. Attaching hose to spray gun. Figure 2. Ins...

Page 10 - Controls

Model H7668 Spray Gun w/Pressure Cup -10 - Figure 7. Compressed air inlet location. 6. Attach the compressed air line to the air inlet as shown in Figure 7. How- ever, wait until you have mixed your paint material and are ready to spray to complete this step (see Spraying on Page 11. Note: Using a 1...

Page 11 - SECTION 4: OPERATIONS

Model H7668 Spray Gun w/Pressure Cup -11 - SECTION 4: OPERATIONS Spraying EXPLOSION HAZARD ! DO NOT smoke or have any source of flame or spark near spraying. Vapors will explode if ignited. RESPIRATORY HAZARD! Always use a NOISH approved respirator when using spray equipment. Failure to protect your...

Page 13 - Atomizing Cap and

Model H7668 Spray Gun w/Pressure Cup -13 - The atomizing cap needs to be adjusted for horizontal or vertical spraying patterns. Spraying in the wrong direction may lead to material build up on the atomizing cap horn. Many performance problems are caused by clogged atomizing holes on the atomizing ca...

Page 14 - SECTION 5: ACCESSORIES

Model H7668 Spray Gun w/Pressure Cup -14 - SECTION 5: ACCESSORIES Figure 16. G6261 Campbell Hausfeld™ water filter. G6261— Campbell Hausfeld™ Water Filter Remove damaging water vapor before it reaches your pneumatic tools. This highly effective, five micron filter features a see through bowl and eas...

Page 15 - SECTION 6: MAINTENANCE

Model H7668 Spray Gun w/Pressure Cup -15 - SECTION 6: MAINTENANCE Cleaning Proper cleaning is the best way to ensure trouble free performance from your spray system. If your system is not thoroughly cleaned, damage and poor spraying will result. Problems caused by improper clean-ing will not be cove...

Page 17 - Lubrication

Model H7668 Spray Gun w/Pressure Cup -17 - Lubrication Lubricate the following areas in Figures 22-24 with a non-silicon spray gun lubri- cant lube after each cleaning. A. Atomizing Cap Threads B. Air Valve Packing C. Trigger Pin D. Fluid Control Knob E. Pattern Control Knob F. Pressure Control Knob...

Page 18 - Troubleshooting; Symptom

Model H7668 Spray Gun w/Pressure Cup -18 - Troubleshooting Symptom Possible Cause Solution Fluttering or Spitting spray. 1. Dry or worn fluid tip seat per- mits air to seep into fluid pas-sage. 2. Material level too low. 3. Fluid tip or strainer obstructed. 4. Dry needle packing. 1. Tighten fluid ti...

Page 20 - Parts Breakdown

Model H7668 Spray Gun w/Pressure Cup -20 - Parts Breakdown ��

Page 22 - WARRANTY AND RETURNS

Model H7668 Spray Gun w/Pressure Cup -22 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alter...

Page 23 - WARRANTY CARD

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

Page 24 - Send a Grizzly Catalog to a friend:; Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here