Page 3 - safety; NOTICE
-1 - Model h6330 2 1 ⁄ 4 gallon paint tank safety instructions for pneumatic tools 1. read this manual. this tool may cause personal injury if used incor-rectly. this manual contains proper safety and operating instructions that must be followed to reduce this risk. 2. Wear eye protection. this tool...
Page 5 - additional safety instructions for paint tanks
-3 - Model h6330 2 1 ⁄ 4 gallon paint tank no list of safety guidelines is complete, because every work environment is different. always consider safety first and use common sense. failure to use this tool with caution and respect could result in serious personal injury. 1. read this manual. this ma...
Page 6 - introduction; specifications; paint tank
Model h6330 2 1 ⁄ 4 gallon paint tank -4 - introduction specifications foreword the spec ific ations, details, and photographs in this manual represent the Model h6330 as supplied when the manual was prepared. however, owing to grizzly’s policy of continuous improvement, changes may be made at any t...
Page 7 - inventory; setup; unpacking
-5 - Model h6330 2 1 ⁄ 4 gallon paint tank h6330 inventory (figure 1) ............... Qtya. paint tank 2 1 ⁄ 4 gallon .......................... 1 b. lid ........................................................ 1 c. regulator Assembly ............................ 1 d. lift handle ......................
Page 8 - tank assembly
Model h6330 2 1 ⁄ 4 gallon paint tank -6 - tank assembly to assemble the paint tank: 1. Apply pipe thread tape to all male pipe threads. 2. thread the lift handle into the center hole on the tank lid (see figure 2 ) and secure with the hex nut. 3. thread the regulator assembly onto the swivel adapte...
Page 9 - operations; tank regulator
-7 - Model h6330 2 1 ⁄ 4 gallon paint tank operations do not exceed the 50 psi maximum operating pressure on your paint tank. exceeding the maximum pressure may cause the tank to explode, causing serious personal injury. eXplosion hazard ! do not smoke or have any source of flame or spark near spray...
Page 10 - tank setup
Model h6330 2 1 ⁄ 4 gallon paint tank -8 - read the manual before operation. become familiar with this tool, its safety instructions, and its operation before beginning any work. serious personal injury may result if safety or operational information is not understood or followed. like all tools the...
Page 11 - cleaning and lubrication; cleaning the tank
-9 - Model h6330 2 1 ⁄ 4 gallon paint tank cleaning and lubrication 3. turn the tank regulator t-handle coun- terclockwise until you no longer feel spring tension. 4. loosen the wing screws on the tank lid ( figure 4 ), tip the clamps back, and tip the tank lid to one side. 5. loosen the spray gun a...
Page 12 - tank troubleshooting; symptom
Model h6330 2 1 ⁄ 4 gallon paint tank -10 - tank troubleshooting symptom possible cause solution Air escaping from regulator port. 1. Broken or damaged dia- phragm in tank regulator. 1. replace tank regulator. pressure dropping slowly on regulator. 1. dirty or worn valve seat in regulator. 2. loose ...
Page 14 - Warranty
grizzly industrial, inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. this warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of mainte-nance. this is gri...
Page 15 - Warranty card
Warranty card name _________________________________________________________________street _________________________________________________________________City _______________________ state _________________________ zip _________phone # ____________________ email ________________________ invoice # ...
Page 16 - send a grizzly catalog to a friend:; place
fold along dotted line grizzly industrial, inc.p.o. boX 2069bellingham, Wa 98227-2069 tape along edges--please do not staple name________________________________ street________________________________ city______________state______zip_______ send a grizzly catalog to a friend: place stamp here