Grizzly Industrial H5570 - Manuals

Page 2 - NOTICE; SAFETY; Safety Instructions For Pneumatic Tools

For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...

Page 4 - Basic Nailer Safety

H5570 18 Gauge Finish Angle Nailer -3 - Operating this nailer can propelobjects into the air, causing immedi-ate eye damage. To protect yourself,always wear American NationalStandards Institute (ANSI) approvedsafety glasses or goggles when oper-ating this equipment. In addition, thisnailer discharge...

Page 5 - INTRODUCTION; Commentary

H5570 18 Gauge Finish Angle Nailer -4 - INTRODUCTION Commentary Most importantly, we stand behind ourtools. If you have any service questions orparts requests, please call or write us atthe location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-966...

Page 7 - Oiling Nailer; OPERATION; Loading Nailer

Oiling Nailer Special oil has been included with yournew Grizzly nailer to help maintain its use-ful life. Place one drop of oil in the nailer airinlet (as shown in Figure 1) before everyuse. Wipe off any excess oil near the nail-er exhaust to avoid dust build-up. Whenthe oil that was included with ...

Page 8 - Operating Nailer

H5570 18 Gauge Finish Angle Nailer -7 - Operating Nailer If you have not read the safety instruc-tions in this manual, DO NOT operatethe nailer. Before you operate your nailer, place onedrop of the included oil into the quick con-nect fitting where the nailer connects to theair supply. To operate yo...

Page 13 - TROUBLESHOOTING

1. O-rings must be replaced & operation of safetyyoke must be checked. 1. Tighten screws.2. Replace O-ring.3. Tighten air fitting. 1. Replace damaged seals. 1. Tighten screws and fit- tings. 2. Clean nose.3. Clean magazine and inspect/repair damage. 4. Check fitting, hose, com- pressor & air...

Page 14 - WARRANTY AND RETURNS

H5570 18 Gauge Finish Angle Nailer -13 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the originalpurchaser from the date of purchase. This warranty does not apply to defects due directlyor indirectly to misuse, abuse, negligence, accidents, repairs or alteratio...

Page 15 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # _______________Serial#_______________...

Page 16 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here