Grizzly Industrial H3372 - Manuals

Page 2 - WARNING; other masonry products.

WARNING Some dust created by power sanding, sawing, grind-ing, drilling, and other construction activities containschemicals known to the State of California to causecancer, birth defects or other reproductive harm.Some examples of these chemicals are: • Lead from lead-based paints.• Crystalline sil...

Page 3 - NOTICE; Safety Instructions For Pneumatic Tools; SAFETY

H3372 3 HP Air Compressor For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, MAY result in minor or mod...

Page 6 - INTRODUCTION AND SET UP; Commentary

H3372 3 HP Air Compressor -4 - INTRODUCTION AND SET UP If you have any comments regarding thismanual, please write to us at the followingaddress: Grizzly Industrial, Inc. C / O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Most important, we stand behind our tools.If you have any s...

Page 7 - Unpacking

H3372 3 HP Air Compressor -5 - The Model H3372 represents a heavyload at 142 pounds. Seek assistancebefore moving. This air compressor is shipped from themanufacturer in a carefully packed carton.If you discover the machine is damagedafter you have signed for delivery, and thetruck and driver are go...

Page 8 - CIRCUIT REQUIREMENTS; Extension Cords; Grounding

H3372 3 HP Air Compressor -6 - CIRCUIT REQUIREMENTS Wiring: The Model H3372 3 HP Air Compressor iswired for 220V operation. Amperage Draw The Model H3372 has a 3 HP motor anddraws the following amperage. H3372 Motor.................................18 Amps Circuit Breaker Requirements Install your ai...

Page 9 - PREPARING FOR USE; Duty Cycle

H3372 3 HP Air Compressor -7 - PREPARING FOR USE Before using your Grizzly AirCompressor, follow these steps : 1. Remove all packing materials and anyprotective plastic bags, zip-tie labelsor tags from the compressor cylinderhead or oil plug. 2. Be sure the air filter is attached to thecylinder head...

Page 10 - STARTING

H3372 3 HP Air Compressor -8 - STARTING To start the air compressor: 1. Make sure the compressor switch isin the OFF position (knob with red cap above pressure gauges shownin Figure 4 pressed down) before connecting the power supply. Figure 4. ON/OFF button. Check the pressure gauge to see that thet...

Page 11 - AIR CONTROL; Delivered Pressure; Air Release

H3372 3 HP Air Compressor -9 - To control the air delivery to your tool: 1. Adjust the air control knob, shown in Figure 7 , to set the PSI that will be delivered to your tool. Turn the knobclockwise to increase the pressureand counter-clockwise to decreasethe pressure. Figure 7 . Air control knob. ...

Page 13 - CONNECTING TOOLS

H3372 3 HP Air Compressor -11 - To connect air tools to your air com-pressor: 1. Make sure the compressor model youuse has a sufficient cubic feet perminute (CFM) output for the air toolyou plan to connect. (Most air toolswill have an air requirement stated interms of a specific CFM at a specificpre...

Page 14 - MAINTENANCE; Before Each Use

H3372 3 HP Air Compressor -12 - 3 . Clean off cylinder head cooling fins ofany dirt which might hamper air flow. 4. Check for worn or damaged cordsand plugs. 5. Check the air pressure in the tireswhen transporting the air compressor. 6. Check for any other condition thatcould hamper the safe operati...

Page 16 - Weekly

H3372 3 HP Air Compressor -14 - If the compressor is used on a dailybasis, perform the following checkseach week: • Rinse the air filter foam element inwater. • Check for loose bolts or fittings. Weekly Like all power tools, there is danger associated with operating this equipment. Accidents are fre...

Page 17 - Storage

H3372 3 HP Air Compressor -15 - After every 300 hours or 3 months ofregular operation, perform the followingmaintenance items: • Change the compressor motor oil.Use compressor oil or a non-deter-gent 30 weight oil. • Rinse the air filter foam element inwater. • Check for air leaks and correct asneed...

Page 18 - TROUBLESHOOTING

-16 - H3372 3 HP Air Compressor TROUBLESHOOTING Pump motorwill not start. Pump motorstarts; butfuses blow orcircuit break-ers trip. Low pressureat the tool. Low pressureat the tanks. C o m p r e s s o rknocking. 1. Check power line for proper voltage.2. Inspect all lead connections on motor, switch ...

Page 24 - WARRANTY AND RETURNS

H3372 3 HP Air Compressor -22 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directlyor indirectly to misuse, abuse, negligence, accidents, repairs or alterations or la...

Page 25 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # _______________Serial#_______________...

Page 26 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT NAIL Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here