Grizzly Industrial H3117 - Manuals

Page 2 - WARNING; • Arsenic and chromium from chemically

WARNING Some dust created by power sanding, sawing, grind-ing, drilling, and other construction activities containschemicals known to the State of California to causecancer, birth defects or other reproductive harm.Some examples of these chemicals are: • Lead from lead-based paints.• Crystalline sil...

Page 3 - NOTICE; Safety Instructions; SAFETY

H3117 Mini Grinder For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious ...

Page 4 - Safety Instructions For Power Tools

H3117 Mini Grinder -2 - 9. USE PROPER EXTENSION CORD for the tool. Make sure your exten-sion cord is in good condition.Conductor size should be in accor-dance with the chart below. Theamperage rating should be listed onthe motor or tool nameplate. Anundersized cord will cause a drop inline voltage r...

Page 5 - INTRODUCTION

H3117 Mini Grinder -3 - INTRODUCTION The specifications, details, and pho-tographs in this manual represent theModel H3117 as supplied when the manu-al was prepared. However, owing toGrizzly’s policy of continuous improve-ment, changes may be made at any timewith no obligation on the part of Grizzly...

Page 6 - OPERATION

H3117 Mini Grinder -4 - OPERATION Installing Bits The Model H3117 can use most bits andcutters that have a 1 ⁄ 8 " diameter shaft. See the Grizzly catalog or website for a com-plete listing of available bits and acces-sories. To install a bit: 1. Unplug the tool from the power source! 2. Depress...

Page 8 - MAINTENANCE

H3117 Mini Grinder -6 - Gasoline or petroleum products usedto clean the tool could explode caus-ing serious personal injury. DO NOTuse gasoline or petroleum productsto clean the tool. Unplug the grinder from the powersource before performing any mainte-nance! Carbon Brushes The Model H3117 has a bru...

Page 9 - PARTS

H3117 Mini Grinder -7 - 01 PH3117001 GRINDER ASSEMBLY 02` PH3117002 COLLET NUT 03 PH3117003 COLLET 04 PH3117004 MOTOR BRUSH (2) 05 PH3117005 BRUSH COVER (2) 06 PH3117006 NOSE 07 PH3117007 COLLET WRENCH 08 PH3117008 BIT ACCESSORY KIT 09 PH3117009 CARRYING CASE REF PART # DESCRIPTION PARTS 1 2 3 4 5 6...

Page 10 - NOTES

Page 12 - WARRANTY AND RETURNS

H3117 Mini Grinder -10 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directlyor indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of m...

Page 13 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # ___________________________ Serial # ...

Page 14 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT NAIL Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here