Grizzly Industrial H2911 - Manuals

Page 2 - NOTICE; Safety Instructions For Power Tools; SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...

Page 4 - Basic Nailer Safety

H2911 18 Gauge Brad Nailer -3 - Operating this nailer can propelobjects into the air, causing immedi-ate eye damage. To protect yourself,always wear American NationalStandards Institute (ANSI) approvedsafety glasses or goggles when oper-ating this equipment. In addition, thisnailer discharges at 85-...

Page 5 - INTRODUCTION; Commentary

H2911 18 Gauge Brad Nailer -4 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax...

Page 7 - OPERATION; Loading Nailer

H2911 18 Gauge Brad Nailer -6 - OPERATION Loading Nailer Operating Nailer To load your nailer: 1. Disconnect the air supply from thenailer! 2. Push the magazine latch in the direc- tion shown in Figure 1 . If you have not read the safety instruc-tions in this manual, do not operate thenailer. Before...

Page 9 - Clearing Jammed Nails; Depth Adjustment

Always disconnect air from nailerwhenever clearing a jammed nail! H2911 18 Gauge Brad Nailer -8 - 4. The jammed nail should now be visi- ble; remove it with needle nose pliers. 5. Install the guide cover and check the safety yoke mechanism for proper operation (following the same instruc- tions as m...

Page 13 - TROUBLESHOOTING

TROUBLESHOOTING Air leaking at trigger valvearea. Air leaking between hous-ing and hose. Air leaking between hous-ing and cap assembly. Tool skips nails while dis-charging. Tool runs slowly or has aloss of power. Fasteners frequently jamthe nailer. Nailer does not fire. 1. O-rings must be replaced &...

Page 14 - WARRANTY AND RETURNS

H2911 18 Gauge Brad Nailer -13 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or ...

Page 15 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # ___________________________ Order # _...

Page 16 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here