Grizzly Industrial H2909 - Manuals

Page 2 - NOTICE; Safety Instructions For Power Tools; SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...

Page 4 - Basic Stapler Safety

H2909 18 Gauge Stapler Kit -3 - Operating this stapler can propelobjects into the air, causing immedi-ate eye damage. To protect yourself,always wear American NationalStandards Institute (ANSI) approvedsafety glasses or goggles when oper-ating this equipment. In addition, thisstapler discharges at 8...

Page 5 - INTRODUCTION; Commentary

H2909 18 Gauge Stapler Kit -4 - INTRODUCTION Commentary Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax...

Page 7 - OPERATION; Loading Stapler

H2909 18 Gauge Stapler Kit -6 - OPERATION Loading Stapler Depth Adjustment Operating Stapler To load your stapler: 1. Disconnect the air supply from thestapler! 2. Push the magazine latch in the direc- tion shown in Figure 1 . 3. Pull back the magazine cover until it stops. 4. Point the stapler up a...

Page 8 - Clearing Jammed Staples

H2909 18 Gauge Stapler Kit -7 - To operate your stapler: 1. Connect the air supply to the quick connect fitting. 2. Test the loaded stapler for proper penetration. Hold the stapler perpen- dicular to the surface of a piece of clean scrap wood that is thick enough for the length of staples you have l...

Page 13 - TROUBLESHOOTING; PROBLEM

TROUBLESHOOTING Air leaking at trigger valvearea. Air leaking between hous-ing and hose. Air leaking between hous-ing and cap assembly. Tool skips staples while dis-charging. Tool runs slowly or has aloss of power. Fasteners frequently jamthe stapler. Stapler does not fire. 1. O-rings must be replac...

Page 14 - WARRANTY AND RETURNS

H2909 18 Gauge Stapler Kit -13 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or ...

Page 15 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # ___________________________ Order # _...

Page 16 - Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here