Grizzly Industrial H0603 - Manuals

H0603 18V Cordless Drill and Saw -5 - Getting Started DRILL OPERATIONS First review the contents of your cordless tool kit and familiarize yourself with the key components. The contents of the kit include: Heavy-Duty Case Cordless Drill Cordless Saw Saw Edge Guide Double End Phillips ® /Straight 1 H...

H0603 18V Cordless Drill and Saw -6 - DRILL OPERATIONS, CON’T 2. Hold the chuck by the collar while turning the sleeve (the forward sec- tion). See Figure 1. This will cause the three chuck jaws located inside the recess to open or close depend- ing upon the direction. 3. When the jaws are at the ap...

H0603 18V Cordless Drill and Saw -7 - DRILL OPERATIONS, CON’T Operating the drill 1. Set the Direction Switch for the desired rotation of the bit or driver. The direction switch is the sliding switch located just above the trigger. When looking down on the drill, push- ing the switch all the way to ...

H0603 18V Cordless Drill and Saw DRILL MAINTENANCE Maintenance Your cordless power tool will give you hun- dreds of hours of operation time before ever needing service. The electrical com- ponents of this cordless drill are not user serviceable. Repair should always be undertaken by a qualified elec...

H0603 18V Cordless Drill and Saw -9 - SAW OPERATIONS Getting Started Fig 3. Top view. Please take the time to familiarize yourselfwith the controls of your new saw. Beloware listed the names of controls and fea-tures found on the saw and an explanationof their function. Please refer to Fig. 3, 4 &am...

H0603 18V Cordless Drill and Saw -10 - SAW OPERATIONS, CON’T Fig 4. Blade side view. Fig 5. Handle side view. From Figure 4: Blade Retaining Screw: Secures blade to saw. Arbor Washer: Used to stabilize blade. Blade Guard: Protects operator from blade. Blade Guard Handle: Used to lift blade guard out...

H0603 18V Cordless Drill and Saw -11 - SAW OPERATIONS, CON’T Removing and Installing Blades: 1. Remove the Battery. 2. Remove the 4mm Allen ® wrench from the left hand side of the trim saw body. Insert the wrench into the blade retaining screw located at the center of the blade. 3. Depress and hold ...

H0603 18V Cordless Drill and Saw -12 - SAW OPERATIONS, CON’T Operating this equipment has the potential to propel debris into the air which cancause eye injury. Always wear safety glasses or goggles when operating equip-ment. Be certain the safety glasses you wear meet the appropriate standards of t...

H0603 18V Cordless Drill and Saw -13 - SAW OPERATIONS, CON’T 7. The arrow in Fig.8 is pointing to a screw that operates as a positive 90° stop. It is secured with a jam nut. Loosen the nut and turn the screw so that it contacts the base. Do Not over tighten. Over tightening this screw will cause the...

H0603 18V Cordless Drill and Saw -14 - SAW OPERATIONS, CON’T Fig 9. Proper Holding Grip. Operating the Trim Saw: 1. Ensure the blade is secure and the battery is installed. 2. Grasp the hand grip with one hand. Use the hand you would use most often: if you are right handed use the right. 3. Grasp th...

H0603 18V Cordless Drill and Saw -15 - SAW MAINTENANCE Maintenance Your cordless power tool will give you hun- dreds of hours of operation time before ever needing service. The electrical com- ponents of this cordless trim saw are not user serviceable. Repair should always be undertaken by a qualifi...

H0603 18V Cordless Drill and Saw -16 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alteratio...

H0603 18V Cordless Drill and Saw -19 - Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model ...