Grizzly Industrial G5960 - Manuals

Page 2 - WARNING; other masonry products.

WARNING Some dust created by power sanding, sawing, grind-ing, drilling, and other construction activities containschemicals known to the State of California to causecancer, birth defects or other reproductive harm.Some examples of these chemicals are: • Lead from lead-based paints.• Crystalline sil...

Page 3 - Safety Instructions For Metalworking Machines; METALWORKING EQUIPMENT; For Your Own Safety Read Instruction; NOTICE

G8143 Collet Closer -1- Safety Instructions For Metalworking Machines METALWORKING EQUIPMENT SAFETY INSTRUCTIONS 5. KEEP CHILDREN AND VISITORSAWAY. All children and visitors should bekept at a safe distance from work area. 6. MAKE WORK SHOP CHILD PROOF with padlocks, master switches, or by removings...

Page 4 - Safety Instructions For Metalworking Tools

G8143 Collet Closer -2- 9. USE PROPER EXTENSION CORD. Makesure your extension cord is in good condi-tion. Conductor size should be in accor-dance with the chart below. The amperagerating should be listed on the motor or toolnameplate. An undersized cord will causea drop in line voltage resulting in ...

Page 5 - INTRODUCTION

G8143 Collet Closer -3- To begin assembly, follow these initial safetyinstructions. 1. Disconnect the lathe from the powersource! 2. Remove the chuck or any other device that ismounted to the spindle. (Refer to yourowner’s manual.) 3. Make sure the 5-C Collet/Morse TaperAdapter (included in the kit)...

Page 6 - Pivot Connector; Hub Separation

Figure 4. Installing hub adapter. Figure 3. Installing hub adapter. G8143 Collet Closer -4- Figure 2. Hub separation. Pivot Connector 3. Install the half of the hub adapter with thesetscrews onto the outboard spindle shaftshown in Figure 3. 4. Tighten all three setscrews. 5. Replace the lathe cover ...

Page 7 - Tube Assembly

G8143 Collet Closer -5- Figure 8. Rotating collet in spindle to engage with adjusting hub. 2. Place the collet in the collet adapter, so thecollet threads are exposed out of the backend of the collet adapter as shown in Figure7. Figure 7. Collet in collet adapter. 3. Hold the adjusting hub with your...

Page 8 - Locking Yoke

Figure 11. Completed collet closer assembly. G8143 Collet Closer -6- 2. Please note that the rod connector is sup-plied with jam nuts. It may be necessary toremove these nuts to allow for the proper fitof the assembly on some lathes. 3. Install the handle to the yoke. Note—If youhave trouble positio...

Page 9 - Locking Stroke

G8143 Collet Closer -7- Locking Stroke To adjust the locking stroke on your colletcloser: 1. Position the locking pawls so they are in thecorrect position on the cam as shown inFigure 12. 2. Secure the 38mm spanner nut against theoutboard side of the bearing housing andthen secure the 30mm spanner n...

Page 11 - Rough Adjustment

G8143 Collet Closer -9- If rough adjustments need to be made to thecollet closer assembly: 1. In the event that the previous adjustmentsfail to allow the collet to lock onto the mater-ial or the draw tube fails to touch the collet,adjust the adapter hub in or out. 2. Loosen the setscrews and turn th...

Page 14 - WARRANTY AND RETURNS

Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original purchaser from thedate of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, neg-ligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly...

Page 15 - WARRANTY CARD

WARRANTY CARD NAME_______________________________________________ PHONE NUMBER___________________ STREET________________________________________________________________________________CITY_______________________________STATE_________ZIP ___________________________________MODEL# G8143 Collet Closer S...