Grizzly Industrial G5352 - Manuals

Page 2 - NOTICE; Safety Instructions For Pneumatic Tools

Model G5352 Spray Gun -2 - SECTION 1: SAFETY Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or s...

Page 4 - Additional Safety Instructions for Spray Guns

Model G5352 Spray Gun -4 - 1. READ THIS MANUAL. This manual contains proper operating instruc-tions for this spray gun. 2. RE AD MATERIAL L ABELS and MATERIAL SAFETY DATA SHEETS (MSDS) . Read and know all the instructions on the packag-ing label and the MSDS before opening the package. This informa-...

Page 5 - SECTION 2: INTRODUCTION; Foreword

Model G5352 Spray Gun -5 - We are proud to offer the Grizzly Model G5352 Spray Gun. This model is part of a growing Grizzly family of fine tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation, and proof of Grizzly’s commitme...

Page 6 - TOOL DATA SHEET; GRAVITY FEED SPRAY GUN MODEL

Model G5352 Spray Gun -6 - Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 TOOL DATA SHEET GRAVITY FEED SPRAY GUN MODEL G5352 MODEL G5352 CUP SIZE 600 ml TYPE OF FEED Gravity FLUID TIP 1.4 mm AIR CONSUMPTION 5 CFM INLET AIR PRESSURE 1.5-3.5 BAR 21-50 PSI FL...

Page 7 - Inventory; Assembly

Model G5352 Spray Gun -7 - SECTION 3: SET UP Figure 1. Model G5352 inventory. B Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the co...

Page 8 - Controls

Model G5352 Spray Gun -8 - 2. Screw the cup onto the top of the body. 3. Attach the air hose directly to the air fit- ting on the spray gun or with a 1 ⁄ 4 " NPT quick connect fitting (not included). 4. Attach the spray gun to a filtered, regu- lated air source. See the Tool Data Sheet on Page 8...

Page 9 - SECTION 4: OPERATIONS; Spraying

Model G5352 Spray Gun -9 - SECTION 4: OPERATIONS The Model G5352 gravity feed spray gun set is designed to spray a wide variety of materials such as lacquers, stains, primers, multi-component paints, clear coats, acrylics, epoxies etc. It is ideal for auto body and woodworking projects. The spray gu...

Page 11 - Atomizing Cap and

Model G5352 Spray Gun -11 - The atomizing cap needs to be adjusted for horizontal or vertical spraying patterns. Spraying in the wrong direction may lead to material build up on the atomizing cap horn. Many performance problems are caused by clogged atomizing holes on the atomizing cap horns (see Cl...

Page 12 - SECTION 5: ACCESSORIES

Model G5352 Spray Gun -12 - Figure 9. G6261 Campbell Hausfeld™ water filter. G6261— Campbell Hausfeld™ Water Filter Remove damaging water vapor before it reaches your pneumatic tools. This highly effective, five micron filter features a see- through bowl and easy in-line connections. 150 PSI maximum...

Page 13 - SECTION 6: MAINTENANCE

Model G5352 Spray Gun -13 - SECTION 6: MAINTENANCE Cleaning Figure 13. Disassembly for cleaning. Atomizing Cap Fluid Tip Filter Spring Cup Fluid Control Knob Needle Proper cleaning is the best way to ensure trouble free performance from your spray gun. If your gun is not thoroughly cleaned, damage a...

Page 14 - Lubrication

Model G5352 Spray Gun -14 - Lubrication Lubricate the following areas with a non-silicon spray gun lubricant after cleaning. A. Atomizing Cap Threads B. Air Valve Packing C. Trigger Pin D. Air Flow Control Valve E. Pattern Control F. Fluid Control Knob Allow the lubricant to coat threads, and run in...

Page 15 - Symptom

Model G5352 Spray Gun -15 - Troubleshooting Symptom Possible Cause Solution Fluttering or spitting spray. 1. Dry or worn fluid tip seat per- mits air to seep into fluid pas-sage. 2. Material level too low. 3. Fluid tip or filter obstructed. 4. Dry needle packing. 1. Tighten fluid tip or replace seat...

Page 18 - WARRANTY AND RETURNS

Model G5352 Spray Gun -18 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack ...

Page 19 - WARRANTY CARD

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

Page 20 - Send a Grizzly Catalog to a friend:; Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here