Grizzly Industrial G1032 - Manuals

Page 2 - WARNING; other masonry products.

-B- G1032 Dust Collector WARNING Some dust created by power sanding, sawing, grind-ing, drilling, and other construction activities containschemicals known to the State of California to causecancer, birth defects or other reproductive harm.Some examples of these chemicals are: • Lead from lead-based...

Page 3 - Table Of Contents

G1032 Dust Collector -1- Table Of Contents PAGE 1. SAFETY ....................................................................................................................2 SAFETY RULES FOR ALL TOOLS ....................................................................2 ADDITIONAL SAFETY INSTRUCTI...

Page 5 - Additional Safety Instructions For Dust Collectors

G1032 Dust Collector -3- Additional Safety Instructions For Dust Collectors 17. DON’T OVERREACH. Keep proper footing and balance at all times. 18. CHECK FOR DAMAGED PARTS. Before further use of the tool, a guard or other partthat is damaged should be carefully checkedto determine that it will operat...

Page 6 - Grounding; SECTION 2: CIRCUIT REQUIREMENTS

Figure 1. Improper connections of the electrical-groundingconductor can result in risk of electric shock. Theconductor with green or green and yellow stripedinsulation is the electrical-grounding conductor. Ifrepair or replacement of the electric cord or plugis necessary, do not connect the equipmen...

Page 7 - SECTION 3: GENERAL INFORMATION

G1032 Dust Collector -5- Grizzly Industrial, Inc. is proud to offer the ModelG1032 Dust Collector. This dust collector is a partof Grizzly’s growing family of fine machinery.When used according to the guidelines set forthin this manual, you can expect years of trouble-free, enjoyable operation and p...

Page 8 - Unpacking; Piece Inventory

-6- G1032 Dust Collector Unpacking The Model G1032 Dust Collector is shipped fromthe manufacturer in a carefully packed carton. Ifyou discover the machine is damaged afteryou’ve signed for delivery, please call Customer Service immediately for advice. Save the containers and all packing materials fo...

Page 9 - Site Considerations

G1032 Dust Collector -7- Site Considerations When placing the G1032 Dust Collector in yourshop, three major considerations should beaddressed: working clearances, lighting and elec-trical, and circuit loading. 1. Working Clearances: Be sure to allow your- self sufficient room to safely operate yourm...

Page 10 - Beginning Assembly; Base

-8- G1032 Dust Collector SECTION 4: ASSEMBLY Beginning Assembly Assembly of the G1032 is straightforward. Wehave organized the assembly process into steps.Please follow them in sequence. Caution: All die-cut metal parts have a sharp edge (called “flashing”) on them after they areformed. This is remo...

Page 11 - Support Column

G1032 Dust Collector -9- Figure 3. Figure 4. Support Column There is one support column that holds the col-lector body & fan/motor assembly and the collec-tor. Attach it to the base plate using the four (4) 5 ⁄ 16 " - 18 x 3 ⁄ 4 " hex bolts provided. Figure 3. Fan / Motor The collector b...

Page 13 - SECTION 6: OPERATIONS; Test Run

G1032 Dust Collector -11- SECTION 6: OPERATIONS Please review the safety rules if you are not sureabout the risks associated with operating thismachine. Turn on the power supply at the mainpanel if not already on. Flip toggle switch on andbe ready to switch off just in case there is a prob-lem. The ...

Page 16 - SECTION 7: MAINTENANCE; Lubrication; General

-14- G1032 Dust Collector SECTION 7: MAINTENANCE Lubrication Periodic maintenance will ensure safe operation,long dust collector life, and low overall cost ofoperation. Routinely check the condition of the followingitems and repair or replace as necessary: 1. Loose mounting bolts, collector body, ou...

Page 20 - WARRANTY AND RETURNS

-18- G1032 Dust Collector Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,negligence, accidents, repairs or alterations or lack of ...

Page 21 - WARRANTY CARD

10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8" Table Saw ___10" - 12" Thickness Planer ___8" - 10" Bandsaw ___Scroll Saw ___Disc/Belt Sander ___Spindle/Belt S...