Grizzly Industrial G0770 - Manuals

-4- Model G0770 (Mfd Since 11/13) The information contained herein is deemed accurate as of 1/16/2014 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2 Model G0770 MACHIN...

-6- Model G0770 (Mfd Since 11/13) ELECTRICAL EQUIPMENT INJURY RISKS. you can be shocked, burned, or killed by touching live electrical components or improperly grounded machinery. to reduce this risk, only allow qualified service personnel to do electrical installation or repair work, and always dis...

-8- Model G0770 (Mfd Since 11/13) Additional Safety for Meat Saws BLADE CONDITION. do not operate with dull, cracked or badly worn blade. dull blades require more effort when cutting and increase the risk of kickback. inspect blades for cracks and missing teeth before each use. HAND PLACEMENT. to pr...

Model G0770 (Mfd Since 11/13) -9- SECTION 2: POWER SUPPLY Availability Before installing the machine, consider the avail-ability and proximity of the required power supply circuit. if an existing circuit does not meet the requirements for this machine, a new circuit must be installed. to minimize th...

Model G0770 (Mfd Since 11/13) -11- SECTION 3: SETUP Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570) 546-9663 for advice. Save the containers and all pa...

-12- Model G0770 (Mfd Since 11/13) Test Run DO NOT start machine until all preceding setup instructions have been performed. Operating an improperly setup machine may result in malfunction or unexpect- ed results that can lead to serious injury, death, or machine /property damage. Serious injury or ...

-14- Model G0770 (Mfd Since 11/13) SECTION 4: OPERATIONS To reduce your risk of serious injury, read this entire manual BEfORE using machine. If you are not experienced with this type of machine, WE STRONGLY RECOMMEND that you seek additional training outside of this manual. Read books /magazines or...

Model G0770 (Mfd Since 11/13) -15- 3. rotate blade tensioning knob counterclock- wise (looking down from above) to release blade tension, pull blade off wheels, then remove it from machine. 4. install replacement blade on wheels and make sure of the following conditions (refer to figures 7–8 for ide...

-16- Model G0770 (Mfd Since 11/13) Cutting Meat the Model g0770 heavy-duty Benchtop Meat Cutting saw is designed to cut through fresh or frozen meat or bones. This saw can quickly cause cutting or amputation inju- ries. Use the included push- through tool and fence to guide the meat through the blad...

Model G0770 (Mfd Since 11/13) -17- SECTION 5: CLEANING & SANITIzING Always be as thorough as possible when cleaning and sanitizing the saw and its parts. Any surface that has been exposed to raw meat or bone may develop bacteria that could cause illness or death if not prop- erly cleaned and san...

Model G0770 (Mfd Since 11/13) -19- When using sanitizers, always follow the recom- mendations on the manu- facturer’s label, and make sure that the product will do the job for which you intend. Never use a prod- uct that will cause exposed surfaces to render meat unsafe for human con- sumption and c...

-20- Model G0770 (Mfd Since 11/13) SECTION 6: ACCESSORIES ACCessories Installing unapproved accessories may cause machine to malfunction, resulting in serious personal injury or machine damage. To reduce this risk, only install accessories recommended for this machine by Grizzly. NOTICE Refer to our...

-22- Model G0770 (Mfd Since 11/13) SECTION 7: MAINTENANCE For optimum performance from your saw, follow this maintenance schedule and refer to any spe-cific instructions given in this section. Daily Check:• loose mounting bolts. • excessively worn or damaged saw blade. • Worn or damaged wires. • Any...

Model G0770 (Mfd Since 11/13) -23- Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support at (570) 546-9663. Note: Please gather the serial number and manufacture...

-24- Model G0770 (Mfd Since 11/13) SHOCK HAZARD. Working on wiring that is con-nected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine before s...

Model G0770 (Mfd Since 11/13) -25- READ ELECTRICAL SAFETY ON PAGE 24! ON/OFF Switch KEDU HY57 Wheel Cover Limit Switch KEDU QKS8 2 3 1 1/L1 3/L2 5/L3 13NO Ground Neutral Hot Ground A1 2/T1 4/T2 6/T3 14NO A2 Contactor Chint NC6-0610 110V Run Capacitor 75MFD 250VAC 110VAC 5-15 Plug (Included) Ground M...

-26- Model G0770 (Mfd Since 11/13) Electrical Components figure 19. on/off switch wiring. figure 20. Wheel cover limit switch wiring. figure 18. Main electrical wiring. Contactor Contactor

-28- Model G0770 (Mfd Since 11/13) Main Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P0770001 MOTOR COVER 41 P0770041 FRAME COVER (BOTTOM) 2 P0770002 ACORN NUT M10-1.5 (SS) 42 P0770042 POWER CORD 16G 3W 60" 5-15 3 P0770003 HEX NUT M10-1.5 (SS) 43 P0770043 STRAIN RELIEF 4 P0770004 G...

Model G0770 (Mfd Since 11/13) -29- 101 102 103 104 105 106 107 Labels REF PART # DESCRIPTION REF PART # DESCRIPTION 101 P0770101 MACHINE ID LABEL 105 P0770105 DISCONNECT POWER LABEL 102 P0770102 READ MANUAL LABEL 106 P0770106 GRIZZLY.COM LABEL P-568C 103 P0770103 MODEL NUMBER LABEL P-568C 107 P07701...

C U T A LO N G D O T T E D LI N E Name _____________________________________________________________________________ Street _____________________________________________________________________________City _______________________ State _________________________ Zip _____________________Phone # _____...