Grizzly Industrial 230V - Manuals

Page 3 - Table of Contents

Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .....................................................................................................................................

Page 4 - INTRODUCTION; Foreword; Contact Info

-2- H8151 230V Mini Welder INTRODUCTION Foreword We are proud to offer the Model H8151 230V Mini Welder. This machine is part of a growing Grizzly family of fine metalworking equipment. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable op...

Page 6 - Safety Instructions for

-4- H8151 230V Mini Welder �� ...

Page 7 - Additional Safety Instructions for

H8151 230V Mini Welder -5- 4. ELECTRIC SHOCK. DO NOT touch live electrical parts. Connect welder to power source with approved earth ground. Make sure all electrical connections are tight, clean, and dry. Connect workpiece to approved earth ground. The work lead is NOT a ground connection and is to ...

Page 8 - Additional Sources for

-6- H8151 230V Mini Welder American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126, (305) 443-9353, Website: www. aws.org . —Safety in welding, Cutting, and Allied Processes, ANSI Standard Z49.1—Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping,...

Page 9 - SECTION 2: CIRCUIT REQUIREMENTS

H8151 230V Mini Welder -7- SECTION 2: CIRCUIT REQUIREMENTS Circuit Requirements Amperage Draw The Model H8151 welder draws the following amps under maximum load: Draw at 220V ......................................... 24 Amps Circuit Requirements Connect your welder to a dedicated and grounded circui...

Page 12 - SECTION 4: OPERATIONS; NOTICE; Operation Safety

-10- H8151 230V Mini Welder SECTION 4: OPERATIONS Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine. Loose hair and cloth- ing could get caught in machinery and cause seri- ous ...

Page 14 - SECTION 5: ACCESSORIES

-12- H8151 230V Mini Welder SECTION 5: ACCESSORIES ACCESSORIES H7786—Auto Darkening Welding Helmet Automatic UV and IR filters protect eyes from harmful visible and invisible light during welding. Switching time is less than or equal to 2 millisec-onds, so there's no need to flip the helmet up to se...

Page 15 - Troubleshooting

H8151 230V Mini Welder -13- Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical Support at (570) 546-9663. SECTION 6: SERVICE Troubl...

Page 16 - Replacement Parts And Labels

-14- H8151 230V Mini Welder Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine agai...

Page 19 - WARRANTY AND RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Griz...